1 files changed, 0 insertions, 160 deletions
diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c
deleted file mode 100644
index 6c60a41..0000000
--- a/board/syteco/jadecpu/jadecpu.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (c) 2010 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * (C) Copyright 2007, mycable GmbH
- * Carsten Schneider <cs@mycable.de>, Alexander Bigga <ab@mycable.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mb86r0x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	struct mb86r0x_ccnt * ccnt = (struct mb86r0x_ccnt *)
-					MB86R0x_CCNT_BASE;
-
-	/* We select mode 0 for group 2 and mode 1 for group 4 */
-	writel(0x00000010, &ccnt->cmux_md);
-
-	gd->flags = 0;
-	gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000;
-
-	icache_enable();
-	dcache_enable();
-
-	return 0;
-}
-
-static void setup_display_power(uint32_t pwr_bit, char *pwm_opts,
-				unsigned long pwm_base)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	struct mb86r0x_pwm *pwm = (struct mb86r0x_pwm *) pwm_base;
-	const char *e;
-
-	writel(readl(&gpio->gpdr2) | pwr_bit, &gpio->gpdr2);
-
-	e = getenv(pwm_opts);
-	if (e != NULL) {
-		const char *s;
-		uint32_t freq, init;
-
-		freq = 0;
-		init = 0;
-
-		s = strchr(e, 'f');
-		if (s != NULL)
-			freq = simple_strtol(s + 2, NULL, 0);
-
-		s = strchr(e, 'i');
-		if (s != NULL)
-			init = simple_strtol(s + 2, NULL, 0);
-
-		if (freq > 0) {
-			writel(CONFIG_MB86R0x_IOCLK / 1000 / freq,
-				&pwm->bcr);
-			writel(1002, &pwm->tpr);
-			writel(1, &pwm->pr);
-			writel(init * 10 + 1, &pwm->dr);
-			writel(1, &pwm->cr);
-			writel(1, &pwm->sr);
-		}
-	}
-}
-
-int board_late_init(void)
-{
-	struct mb86r0x_gpio *gpio = (struct mb86r0x_gpio *)
-					MB86R0x_GPIO_BASE;
-	uint32_t in_word;
-
-#ifdef CONFIG_VIDEO_MB86R0xGDC
-	/* Check if we have valid display settings and turn on power if so */
-	/* Display 0 */
-	if (getenv("gs_dsp_0_param") || getenv("videomode"))
-		setup_display_power((1 << 3), "gs_dsp_0_pwm",
-					MB86R0x_PWM0_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 3), &gpio->gpddr2);
-
-	/* Display 1 */
-	if (getenv("gs_dsp_1_param") || getenv("videomode1"))
-		setup_display_power((1 << 4), "gs_dsp_1_pwm",
-					MB86R0x_PWM1_BASE);
-
-	/* The corresponding GPIO is always an output */
-	writel(readl(&gpio->gpddr2) | (1 << 4), &gpio->gpddr2);
-#endif /* CONFIG_VIDEO_MB86R0xGDC */
-
-	/* 5V enable */
-	writel(readl(&gpio->gpdr1) & ~(1 << 5), &gpio->gpdr1);
-	writel(readl(&gpio->gpddr1) | (1 << 5), &gpio->gpddr1);
-
-	/* We have special boot options if told by GPIOs */
-	in_word = readl(&gpio->gpdr1);
-
-	if ((in_word & 0xC0) == 0xC0) {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		setenv("preboot", "run gs_slow_boot");
-	} else if ((in_word & 0xC0) != 0) {
-		setenv("stdout", "vga");
-		setenv("preboot", "run gs_slow_boot");
-	} else {
-		setenv("stdin", "serial");
-		setenv("stdout", "serial");
-		setenv("stderr", "serial");
-		if (getenv("gs_devel")) {
-			setenv("preboot", "run gs_slow_boot");
-		} else {
-			setenv("preboot", "run gs_fast_boot");
-		}
-	}
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-/*
- * DRAM configuration
- */
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-					PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}