12 files changed, 361 insertions, 290 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 738b55e..4a21589 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -39,16 +39,23 @@ config DRAM_CLK
 	default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	---help---
 	Set the dram clock speed, valid range 240 - 480, must be a multiple
-	of 24. Note on sun4i / sun5i / sun7i this is only used by boards
-	which use dram autoconfig.
+	of 24.
+
+if MACH_SUN5I || MACH_SUN7I
+config DRAM_MBUS_CLK
+	int "sunxi mbus clock speed"
+	default 300
+	---help---
+	Set the mbus clock speed. The maximum on sun5i hardware is 300MHz.
+
+endif
 
 config DRAM_ZQ
 	int "sunxi dram zq value"
 	default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
 	default 127 if MACH_SUN7I
 	---help---
-	Set the dram zq value. Note on sun4i / sun5i / sun7i this is only
-	used by boards which use dram autoconfig.
+	Set the dram zq value.
 
 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 config DRAM_EMR1
@@ -56,98 +63,81 @@ config DRAM_EMR1
 	default 0 if MACH_SUN4I
 	default 4 if MACH_SUN5I || MACH_SUN7I
 	---help---
-	Set the dram controller emr1 value. Note this is only used by boards
-	which use dram autoconfig.
-endif
-
-config SYS_CONFIG_NAME
-	default "sun4i" if MACH_SUN4I
-	default "sun5i" if MACH_SUN5I
-	default "sun6i" if MACH_SUN6I
-	default "sun7i" if MACH_SUN7I
-	default "sun8i" if MACH_SUN8I
-
-choice
-	prompt "Board"
-
-config TARGET_A10S_OLINUXINO_M
-	bool "A10S_OLINUXINO_M"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINOM
-	bool "A13_OLINUXINOM"
-	depends on MACH_SUN5I
-
-config TARGET_A13_OLINUXINO
-	bool "A13_OLINUXINO"
-	depends on MACH_SUN5I
-
-config TARGET_A20_OLINUXINO_L2
-	bool "A20_OLINUXINO_L2"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_L
-	bool "A20_OLINUXINO_L"
-	depends on MACH_SUN7I
-
-config TARGET_A20_OLINUXINO_M
-	bool "A20_OLINUXINO_M"
-	depends on MACH_SUN7I
-
-config TARGET_AUXTEK_T004
-	bool "AUXTEK_T004"
-	depends on MACH_SUN5I
-
-config TARGET_BANANAPI
-	bool "BANANAPI"
-	depends on MACH_SUN7I
-
-config TARGET_BANANAPRO
-	bool "BANANAPRO"
-	depends on MACH_SUN7I
+	Set the dram controller emr1 value.
 
-config TARGET_CUBIEBOARD2
-	bool "CUBIEBOARD2"
-	depends on MACH_SUN7I
-
-config TARGET_CUBIETRUCK
-	bool "CUBIETRUCK"
-	depends on MACH_SUN7I
+config DRAM_ODT_EN
+	int "sunxi dram odt_en value"
+	default 0
+	---help---
+	Set the dram controller odt_en parameter. This can be used to
+	enable/disable the ODT feature.
 
-config TARGET_PCDUINO3
-	bool "PCDUINO3"
-	depends on MACH_SUN7I
+config DRAM_TPR3
+	hex "sunxi dram tpr3 value"
+	default 0
+	---help---
+	Set the dram controller tpr3 parameter. This parameter configures
+	the delay on the command lane and also phase shifts, which are
+	applied for sampling incoming read data. The default value 0
+	means that no phase/delay adjustments are necessary. Properly
+	configuring this parameter increases reliability at high DRAM
+	clock speeds.
+
+config DRAM_DQS_GATING_DELAY
+	hex "sunxi dram dqs_gating_delay value"
+	default 0
+	---help---
+	Set the dram controller dqs_gating_delay parmeter. Each byte
+	encodes the DQS gating delay for each byte lane. The delay
+	granularity is 1/4 cycle. For example, the value 0x05060606
+	means that the delay is 5 quarter-cycles for one lane (1.25
+	cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes.
+	The default value 0 means autodetection. The results of hardware
+	autodetection are not very reliable and depend on the chip
+	temperature (sometimes producing different results on cold start
+	and warm reboot). But the accuracy of hardware autodetection
+	is usually good enough, unless running at really high DRAM
+	clocks speeds (up to 600MHz). If unsure, keep as 0.
 
-config TARGET_MELE_M3
-	bool "MELE_M3"
-	depends on MACH_SUN7I
+choice
+	prompt "sunxi dram timings"
+	default DRAM_TIMINGS_VENDOR_MAGIC
+	---help---
+	Select the timings of the DDR3 chips.
 
-config TARGET_MK802_A10S
-	bool "MK802_A10S"
-	depends on MACH_SUN5I
+config DRAM_TIMINGS_VENDOR_MAGIC
+	bool "Magic vendor timings from Android"
+	---help---
+	The same DRAM timings as in the Allwinner boot0 bootloader.
 
-config TARGET_MSI_PRIMO73
-	bool "MSI Primo73 (7\" tablet)"
-	depends on MACH_SUN7I
+config DRAM_TIMINGS_DDR3_1066F_1333H
+	bool "JEDEC DDR3-1333H with down binning to DDR3-1066F"
+	---help---
+	Use the timings of the standard JEDEC DDR3-1066F speed bin for
+	DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin
+	for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips
+	used in Allwinner A10/A13/A20 devices. In the case of DDR3-1333
+	or DDR3-1600 chips, be sure to check the DRAM datasheet to confirm
+	that down binning to DDR3-1066F is supported (because DDR3-1066F
+	uses a bit faster timings than DDR3-1333H).
+
+config DRAM_TIMINGS_DDR3_800E_1066G_1333J
+	bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J"
 	---help---
-	The MSI Primo73 is an A20 based tablet, with 1G RAM, 16G NAND,
-	1024x600 TN LCD display, mono speaker, 0.3 MP front camera, 2.0 MP
-	rear camera, 3000 mAh battery, gt911 touchscreen, mma8452 accelerometer
-	and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons
-	(both volume buttons are also connected to the UBOOT_SEL pin). The
-	external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB
-	OTG and 3.5mm headphone jack. More details are available at
-	    http://linux-sunxi.org/MSI_Primo73
+	Use the timings of the slowest possible JEDEC speed bin for the
+	selected DRAM_CLK. Depending on the DRAM_CLK value, it may be
+	DDR3-800E, DDR3-1066G or DDR3-1333J.
 
-config TARGET_I12_TVBOX
-	bool "I12_TVBOX"
-	depends on MACH_SUN7I
+endchoice
 
-config TARGET_R7DONGLE
-	bool "R7DONGLE"
-	depends on MACH_SUN5I
+endif
 
-endchoice
+config SYS_CONFIG_NAME
+	default "sun4i" if MACH_SUN4I
+	default "sun5i" if MACH_SUN5I
+	default "sun6i" if MACH_SUN6I
+	default "sun7i" if MACH_SUN7I
+	default "sun8i" if MACH_SUN8I
 
 config SYS_BOARD
 	default "sunxi"
@@ -270,6 +260,16 @@ config VIDEO_VGA_VIA_LCD
 	LCD interface driving a VGA connector, such as found on the
 	Olimex A13 boards.
 
+config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	boolean "Force sync active high for VGA via LCD controller support"
+	depends on VIDEO_VGA_VIA_LCD
+	default n
+	---help---
+	Say Y here if you've a board which uses opendrain drivers for the vga
+	hsync and vsync signals. Opendrain drivers cannot generate steep enough
+	positive edges for a stable video output, so on boards with opendrain
+	drivers the sync signals must always be active high.
+
 config VIDEO_VGA_EXTERNAL_DAC_EN
 	string "LCD panel power enable pin"
 	depends on VIDEO_VGA_VIA_LCD
@@ -383,4 +383,10 @@ config USB_KEYBOARD
 	Say Y here to add support for using a USB keyboard (typically used
 	in combination with a graphical console).
 
+config GMAC_TX_DELAY
+	int "GMAC Transmit Clock Delay Chain"
+	default 0
+	---help---
+	Set the GMAC Transmit Clock Delay Chain value.
+
 endif
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 743e7f5..faa413c 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -34,16 +34,6 @@ F:	configs/qt840a_defconfig
 F:	include/configs/sun8i.h
 F:	configs/Ippo_q8h_v1_2_defconfig
 
-CUBIEBOARD2 BOARD
-M:	Ian Campbell <ijc@hellion.org.uk>
-M:	Hans de Goede <hdegoede@redhat.com>
-S:	Maintained
-F:	include/configs/sun7i.h
-F:	configs/Cubieboard2_defconfig
-F:	configs/Cubieboard2_FEL_defconfig
-F:	configs/Cubietruck_defconfig
-F:	configs/Cubietruck_FEL_defconfig
-
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>
 S:	Maintained
@@ -61,36 +51,47 @@ M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
 F:	configs/Colombus_defconfig
 
+CUBIEBOARD2 BOARD
+M:	Ian Campbell <ijc@hellion.org.uk>
+M:	Hans de Goede <hdegoede@redhat.com>
+S:	Maintained
+F:	include/configs/sun7i.h
+F:	configs/Cubieboard2_defconfig
+F:	configs/Cubieboard2_FEL_defconfig
+F:	configs/Cubietruck_defconfig
+F:	configs/Cubietruck_FEL_defconfig
+
 GEMEI-G9 TABLET
-M: Priit Laes <plaes@plaes.org>
-S: Maintained
-F: configs/sunxi_Gemei_G9_defconfig
+M:	Priit Laes <plaes@plaes.org>
+S:	Maintained
+F:	configs/sunxi_Gemei_G9_defconfig
 
-HUMMINIGBIRD-A31 BOARD
+HUMMINGBIRD-A31 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Hummingbird_A31_defconfig
 
+INET-86VS BOARD
+M:	Michal Suchanek <hramrach@gmail.com>
+S:	Maintained
+F:	board/sunxi/dram_inet_86vs.c
+F:	configs/Inet_86VS_defconfig
+
 IPPO-Q8H-V5 BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
 F:	configs/Ippo_q8h_v5_defconfig
 
-MSI-PRIMO73 BOARD
-M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
-S:	Maintained
-F:	configs/MSI_Primo73_defconfig
-
-MSI-PRIMO81 BOARD
-M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
-S:	Maintained
-F:	configs/MSI_Primo81_defconfig
-
 LINKSPRITE-PCDUINO BOARD
 M:	Zoltan Herpai <wigyori@uid0.hu>
 S:	Maintained
 F:	configs/Linksprite_pcDuino_defconfig
 
+LINKSPRITE-PCDUINO3-NANO BOARD
+M:	Adam Sampson <ats@offog.org>
+S:	Maintained
+F:	configs/Linksprite_pcDuino3_Nano_defconfig
+
 MARSBOARD-A10 BOARD
 M:	Aleksei Mamlin <mamlinav@gmail.com>
 S:	Maintained
@@ -100,3 +101,18 @@ MELE M5 BOARD
 M:	Ian Campbell <ijc@hellion.org.uk>
 S:	Maintained
 F:	configs/Mele_M5_defconfig
+
+MSI-PRIMO73 BOARD
+M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
+S:	Maintained
+F:	configs/MSI_Primo73_defconfig
+
+MSI-PRIMO81 BOARD
+M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
+S:	Maintained
+F:	configs/MSI_Primo81_defconfig
+
+TZX-Q8-713B7 BOARD
+M:	Paul Kocialkowski <contact@paulk.fr>
+S:	Maintained
+F:	configs/TZX-Q8-713B7_defconfig
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 71edb83..43766e0 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -12,11 +12,5 @@ obj-y	+= board.o
 obj-$(CONFIG_SUNXI_GMAC)	+= gmac.o
 obj-$(CONFIG_SUNXI_AHCI)	+= ahci.o
 obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i_auto.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun5i_auto.o
 obj-$(CONFIG_MACH_SUN7I)	+= dram_sun5i_auto.o
-obj-$(CONFIG_TARGET_A10S_OLINUXINO_M)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_A13_OLINUXINO)	+= dram_a13_olinuxino.o
-obj-$(CONFIG_TARGET_A13_OLINUXINOM)	+= dram_a13_oli_micro.o
-# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
-obj-$(CONFIG_TARGET_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
-obj-$(CONFIG_TARGET_MK802_A10S)		+= dram_sun5i_auto.o
-obj-$(CONFIG_TARGET_R7DONGLE)		+= dram_r7dongle.o
diff --git a/board/sunxi/dram_a10s_olinuxino_m.c b/board/sunxi/dram_a10s_olinuxino_m.c
deleted file mode 100644
index 8900539..0000000
--- a/board/sunxi/dram_a10s_olinuxino_m.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_oli_micro.c b/board/sunxi/dram_a13_oli_micro.c
deleted file mode 100644
index 8154ea2..0000000
--- a/board/sunxi/dram_a13_oli_micro.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 16,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 256,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_a13_olinuxino.c b/board/sunxi/dram_a13_olinuxino.c
deleted file mode 100644
index ca96260..0000000
--- a/board/sunxi/dram_a13_olinuxino.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 408,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 16,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 512,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
deleted file mode 100644
index 0ed7943..0000000
--- a/board/sunxi/dram_bananapi.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 432,
-	.type = 3,
-	.rank_num = 1,
-	.density = 4096,
-	.io_width = 16,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 0x7f,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0x0,
-	.tpr4 = 0x1,
-	.tpr5 = 0x0,
-	.emr1 = 0x4,
-	.emr2 = 0x10,
-	.emr3 = 0x0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_r7dongle.c b/board/sunxi/dram_r7dongle.c
deleted file mode 100644
index 59343cb..0000000
--- a/board/sunxi/dram_r7dongle.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* this file is generated, don't edit it yourself */
-
-#include <common.h>
-#include <asm/arch/dram.h>
-
-static struct dram_para dram_para = {
-	.clock = 384,
-	.type = 3,
-	.rank_num = 1,
-	.density = 2048,
-	.io_width = 8,
-	.bus_width = 32,
-	.cas = 9,
-	.zq = 123,
-	.odt_en = 0,
-	.size = 1024,
-	.tpr0 = 0x42d899b7,
-	.tpr1 = 0xa090,
-	.tpr2 = 0x22a00,
-	.tpr3 = 0,
-	.tpr4 = 0,
-	.tpr5 = 0,
-	.emr1 = 0x04,
-	.emr2 = 0x10,
-	.emr3 = 0,
-};
-
-unsigned long sunxi_dram_init(void)
-{
-	return dramc_init(&dram_para);
-}
diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c
index 826bacf..09e0c9a 100644
--- a/board/sunxi/dram_sun4i_auto.c
+++ b/board/sunxi/dram_sun4i_auto.c
@@ -8,19 +8,25 @@ static struct dram_para dram_para = {
 	.density = 0,
 	.io_width = 0,
 	.bus_width = 0,
-	.cas = 6,
 	.zq = CONFIG_DRAM_ZQ,
-	.odt_en = 0,
+	.odt_en = CONFIG_DRAM_ODT_EN,
 	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 6,
 	.tpr0 = 0x30926692,
 	.tpr1 = 0x1090,
 	.tpr2 = 0x1a0c8,
-	.tpr3 = 0,
+	.emr2 = 0,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
+	.tpr3 = CONFIG_DRAM_TPR3,
 	.tpr4 = 0,
 	.tpr5 = 0,
 	.emr1 = CONFIG_DRAM_EMR1,
-	.emr2 = 0,
 	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
 };
 
 unsigned long sunxi_dram_init(void)
diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c
index e86b08e..e52d54c 100644
--- a/board/sunxi/dram_sun5i_auto.c
+++ b/board/sunxi/dram_sun5i_auto.c
@@ -5,24 +5,31 @@
 
 static struct dram_para dram_para = {
 	.clock = CONFIG_DRAM_CLK,
+	.mbus_clock = CONFIG_DRAM_MBUS_CLK,
 	.type = 3,
 	.rank_num = 1,
 	.density = 0,
 	.io_width = 0,
 	.bus_width = 0,
-	.cas = 9,
 	.zq = CONFIG_DRAM_ZQ,
-	.odt_en = 0,
+	.odt_en = CONFIG_DRAM_ODT_EN,
 	.size = 0,
+#ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC
+	.cas = 9,
 	.tpr0 = 0x42d899b7,
 	.tpr1 = 0xa090,
 	.tpr2 = 0x22a00,
+	.emr2 = 0x10,
+#else
+#	include "dram_timings_sun4i.h"
+	.active_windowing = 1,
+#endif
 	.tpr3 = 0,
 	.tpr4 = 0,
 	.tpr5 = 0,
 	.emr1 = CONFIG_DRAM_EMR1,
-	.emr2 = 0x10,
 	.emr3 = 0,
+	.dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY,
 };
 
 unsigned long sunxi_dram_init(void)
diff --git a/board/sunxi/dram_timings_sun4i.h b/board/sunxi/dram_timings_sun4i.h
new file mode 100644
index 0000000..29b934d
--- /dev/null
+++ b/board/sunxi/dram_timings_sun4i.h
@@ -0,0 +1,205 @@
+/* This file is automatically generated, do not edit */
+
+#if defined(CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-1066F @360MHz, timings: 6-5-5-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e5590,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-1066F @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x288f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-1066F @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066F @408MHz, timings: 7-6-6-16 */
+	.cas  = 7,
+	.tpr0 = 0x2ab06690,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066F @432MHz, timings: 7-6-6-17 */
+	.cas  = 7,
+	.tpr0 = 0x2cb16690,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066F @456MHz, timings: 7-6-6-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b26690,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066F @468MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066F @480MHz, timings: 7-7-7-18 */
+	.cas  = 7,
+	.tpr0 = 0x32b27790,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066F @504MHz, timings: 7-7-7-19 */
+	.cas  = 7,
+	.tpr0 = 0x34d37790,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066F @528MHz, timings: 7-7-7-20 */
+	.cas  = 7,
+	.tpr0 = 0x36d47790,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333H @540MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x36b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333H @552MHz, timings: 9-8-8-20 */
+	.cas  = 9,
+	.tpr0 = 0x38b488b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333H @576MHz, timings: 9-8-8-21 */
+	.cas  = 9,
+	.tpr0 = 0x3ab588b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333H @600MHz, timings: 9-9-9-22 */
+	.cas  = 9,
+	.tpr0 = 0x3cb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333H @624MHz, timings: 9-9-9-23 */
+	.cas  = 9,
+	.tpr0 = 0x3eb799b4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333H @648MHz, timings: 9-9-9-24 */
+	.cas  = 9,
+	.tpr0 = 0x42b899b4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#elif defined(CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J)
+# if CONFIG_DRAM_CLK <= 360 /* DDR3-800E @360MHz, timings: 6-6-6-14 */
+	.cas  = 6,
+	.tpr0 = 0x268e6690,
+	.tpr1 = 0xa090,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 384 /* DDR3-800E @384MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 396 /* DDR3-800E @396MHz, timings: 6-6-6-15 */
+	.cas  = 6,
+	.tpr0 = 0x2a8f6690,
+	.tpr1 = 0xa0a0,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x0,
+# elif CONFIG_DRAM_CLK <= 408 /* DDR3-1066G @408MHz, timings: 8-7-7-16 */
+	.cas  = 8,
+	.tpr0 = 0x2cb07790,
+	.tpr1 = 0xa0a8,
+	.tpr2 = 0x22a00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 432 /* DDR3-1066G @432MHz, timings: 8-7-7-17 */
+	.cas  = 8,
+	.tpr0 = 0x2eb17790,
+	.tpr1 = 0xa0b0,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 456 /* DDR3-1066G @456MHz, timings: 8-7-7-18 */
+	.cas  = 8,
+	.tpr0 = 0x30b27790,
+	.tpr1 = 0xa0b8,
+	.tpr2 = 0x22e00,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 468 /* DDR3-1066G @468MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x32b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 480 /* DDR3-1066G @480MHz, timings: 8-8-8-18 */
+	.cas  = 8,
+	.tpr0 = 0x34b28890,
+	.tpr1 = 0xa0c0,
+	.tpr2 = 0x23200,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 504 /* DDR3-1066G @504MHz, timings: 8-8-8-19 */
+	.cas  = 8,
+	.tpr0 = 0x36d38890,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 528 /* DDR3-1066G @528MHz, timings: 8-8-8-20 */
+	.cas  = 8,
+	.tpr0 = 0x38d48890,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x23600,
+	.emr2 = 0x8,
+# elif CONFIG_DRAM_CLK <= 540 /* DDR3-1333J @540MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x38b499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2b600,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 552 /* DDR3-1333J @552MHz, timings: 10-9-9-20 */
+	.cas  = 10,
+	.tpr0 = 0x3ab499b4,
+	.tpr1 = 0xa0c8,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 576 /* DDR3-1333J @576MHz, timings: 10-9-9-21 */
+	.cas  = 10,
+	.tpr0 = 0x3cb599b4,
+	.tpr1 = 0xa0d0,
+	.tpr2 = 0x2ba00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 600 /* DDR3-1333J @600MHz, timings: 10-9-9-22 */
+	.cas  = 10,
+	.tpr0 = 0x3eb699b4,
+	.tpr1 = 0xa0d8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 624 /* DDR3-1333J @624MHz, timings: 10-10-10-23 */
+	.cas  = 10,
+	.tpr0 = 0x40b7aab4,
+	.tpr1 = 0xa0e8,
+	.tpr2 = 0x2be00,
+	.emr2 = 0x10,
+# elif CONFIG_DRAM_CLK <= 648 /* DDR3-1333J @648MHz, timings: 10-10-10-24 */
+	.cas  = 10,
+	.tpr0 = 0x44b8aab4,
+	.tpr1 = 0xa0f0,
+	.tpr2 = 0x2c200,
+	.emr2 = 0x10,
+# else
+#   error CONFIG_DRAM_CLK is set too high
+# endif
+#else
+# error CONFIG_DRAM_TIMINGS_* is not defined
+#endif
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index 4e4615e..8849132 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -24,20 +24,13 @@ int sunxi_gmac_initialize(bd_t *bis)
 #ifdef CONFIG_RGMII
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
 		CCM_GMAC_CTRL_GPIT_RGMII);
+	setbits_le32(&ccm->gmac_clk_cfg,
+		     CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY));
 #else
 	setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_MII |
 		CCM_GMAC_CTRL_GPIT_MII);
 #endif
 
-	/*
-	 * In order for the gmac nic to work reliable on the Bananapi, we
-	 * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain"
-	 * of the GMAC clk register to 3.
-	 */
-#if defined CONFIG_TARGET_BANANAPI || defined CONFIG_TARGET_BANANAPRO
-	setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10);
-#endif
-
 #ifndef CONFIG_MACH_SUN6I
 	/* Configure pin mux settings for GMAC */
 	for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(16); pin++) {