1 files changed, 84 insertions, 0 deletions
diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c
new file mode 100644
index 0000000..0c262ea
--- /dev/null
+++ b/board/sunxi/ahci.c
@@ -0,0 +1,84 @@
+#include <common.h>
+#include <ahci.h>
+#include <scsi.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_RWCR    0x00fc
+
+/* This magic PHY initialisation was taken from the Allwinner releases
+ * and Linux driver, but is completely undocumented.
+ */
+static int sunxi_ahci_phy_init(u32 base)
+{
+	u8 *reg_base = (u8 *)base;
+	u32 reg_val;
+	int timeout;
+
+	writel(0, reg_base + AHCI_RWCR);
+	mdelay(5);
+
+	setbits_le32(reg_base + AHCI_PHYCS1R, 0x1 << 19);
+	clrsetbits_le32(reg_base + AHCI_PHYCS0R,
+			(0x7 << 24),
+			(0x5 << 24) | (0x1 << 23) | (0x1 << 18));
+	clrsetbits_le32(reg_base + AHCI_PHYCS1R,
+			(0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+			(0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+	setbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 28) | (0x1 << 15));
+	clrbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 19));
+	clrsetbits_le32(reg_base + AHCI_PHYCS0R, (0x7 << 20), (0x3 << 20));
+	clrsetbits_le32(reg_base + AHCI_PHYCS2R, (0x1f << 5), (0x19 << 5));
+	mdelay(5);
+
+	setbits_le32(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+	timeout = 250; /* Power up takes approx 50 us */
+	for (;;) {
+		reg_val = readl(reg_base + AHCI_PHYCS0R) & (0x7 << 28);
+		if (reg_val == (0x2 << 28))
+			break;
+		if (--timeout == 0) {
+			printf("AHCI PHY power up failed.\n");
+			return -EIO;
+		}
+		udelay(1);
+	};
+
+	setbits_le32(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+	timeout = 100; /* Calibration takes approx 10 us */
+	for (;;) {
+		reg_val = readl(reg_base + AHCI_PHYCS2R) & (0x1 << 24);
+		if (reg_val == 0x0)
+			break;
+		if (--timeout == 0) {
+			printf("AHCI PHY calibration failed.\n");
+			return -EIO;
+		}
+		udelay(1);
+	}
+
+	mdelay(15);
+
+	writel(0x7, reg_base + AHCI_RWCR);
+
+	return 0;
+}
+
+void scsi_init(void)
+{
+	printf("SUNXI SCSI INIT\n");
+#ifdef CONFIG_SATAPWR
+	gpio_direction_output(CONFIG_SATAPWR, 1);
+#endif
+
+	if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
+		return;
+
+	ahci_init(SUNXI_SATA_BASE);
+}