diff options
Diffstat (limited to 'board/st/stv0991/stv0991.c')
-rw-r--r-- | board/st/stv0991/stv0991.c | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c new file mode 100644 index 0000000..f465699 --- /dev/null +++ b/board/st/stv0991/stv0991.c @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/stv0991_periph.h> +#include <asm/arch/stv0991_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <netdev.h> +#include <asm/io.h> +#include <dm/platdata.h> +#include <dm/platform_data/serial_pl01x.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct gpio_regs *const gpioa_regs = + (struct gpio_regs *) GPIOA_BASE_ADDR; + +static const struct pl01x_serial_platdata serial_platdata = { + .base = 0x80406000, + .type = TYPE_PL011, + .clock = 2700 * 1000, +}; + +U_BOOT_DEVICE(stv09911_serials) = { + .name = "serial_pl01x", + .platdata = &serial_platdata, +}; + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +void show_boot_progress(int progress) +{ + printf("%i\n", progress); +} +#endif + +void enable_eth_phy(void) +{ + /* Set GPIOA_06 pad HIGH (Appli board)*/ + writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir); + writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data); +} +int board_eth_enable(void) +{ + stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4); + clock_setup(ETH_CLOCK_CFG); + enable_eth_phy(); + return 0; +} + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + board_eth_enable(); + return 0; +} + +int board_uart_init(void) +{ + stv0991_pinmux_config(UART_GPIOC_30_31); + clock_setup(UART_CLOCK_CFG); + return 0; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int board_early_init_f(void) +{ + board_uart_init(); + return 0; +} +#endif + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_1_SIZE; + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + int ret = 0; + +#if defined(CONFIG_DESIGNWARE_ETH) + u32 interface = PHY_INTERFACE_MODE_MII; + if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0) + ret++; +#endif + return ret; +} +#endif |