diff options
Diffstat (limited to 'board/st-ericsson/u8500/prcmu.c')
| -rw-r--r-- | board/st-ericsson/u8500/prcmu.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/board/st-ericsson/u8500/prcmu.c b/board/st-ericsson/u8500/prcmu.c new file mode 100644 index 0000000..6f9302f --- /dev/null +++ b/board/st-ericsson/u8500/prcmu.c @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2009 ST-Ericsson SA + * + * Adapted from the Linux version: + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +/* + * NOTE: This currently does not support the I2C workaround access method. + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/errno.h> + +#include "prcmu-fw.h" + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104) + +static int prcmu_is_ready(void) +{ + int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE; + if (!ready) + printf("PRCMU firmware not ready\n"); + return ready; +} + +static int _wait_for_req_complete(int num) +{ + int timeout = 1000; + + /* checking any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) + ; + + timeout = 1000; + + /* Set an interrupt to XP70 */ + writel(1 << num, PRCM_MBOX_CPU_SET); + + while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) + ; + + if (!timeout) { + printf("PRCMU operation timed out\n"); + return -1; + } + + return 0; +} + +/** + * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db8500 register to be accessed + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_read(u8 reg, u16 slave) +{ + uint8_t i2c_status; + uint8_t i2c_val; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", + reg, slave); + + /* prepare the data for mailbox 5 */ + writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(0, PRCM_REQ_MB5_I2CVAL); + + _wait_for_req_complete(REQ_MB5); + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + i2c_val = readb(PRCM_ACK_MB5_VAL); + + if (i2c_status == I2C_RD_OK) + return i2c_val; + else { + + printf("prcmu_i2c_read:read return status= %d\n", + i2c_status); + return -1; + } + +} + +/** + * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C + * @reg: - db8500 register bank to be accessed + * @slave: - db800 register to be written to + * @reg_data: - the data to write + * Returns: ACK_MB5 value containing the status + */ +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) +{ + uint8_t i2c_status; + + if (!prcmu_is_ready()) + return -1; + + debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", + reg, slave); + + /* prepare the data for mailbox 5 */ + writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); + writeb(slave, PRCM_REQ_MB5_I2CSLAVE); + writeb(reg_data, PRCM_REQ_MB5_I2CVAL); + + debug("\ncpu_is_u8500v11\n"); + _wait_for_req_complete(REQ_MB5); + + /* retrieve values */ + debug("ack-mb5:transfer status = %x\n", + readb(PRCM_ACK_MB5_STATUS)); + debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1); + debug("ack-mb5:slave_add = %x\n", + readb(PRCM_ACK_MB5_SLAVE)); + debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL)); + + i2c_status = readb(PRCM_ACK_MB5_STATUS); + debug("\ni2c_status = %x\n", i2c_status); + if (i2c_status == I2C_WR_OK) + return 0; + else { + printf("ape-i2c: i2c_status : 0x%x\n", i2c_status); + return -1; + } +} |