1 files changed, 0 insertions, 72 deletions
diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h
deleted file mode 100644
index a59ffb0..0000000
--- a/board/siemens/dxr2/board.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-#define PARGS3(x)	settings.ddr3.x-ddr3_default.x, \
-			settings.ddr3.x, ddr3_default.x
-#define PRINTARGS(y)	printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
-#define MAGIC_CHIP	0x50494843
-
-/* Automatic generated definition */
-/* Wed, 16 Apr 2014 16:50:41 +0200 */
-/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
-struct ddr3_data {
-	unsigned int magic;			/* 0x33524444 */
-	unsigned int version;			/* 0x56312e35 */
-	unsigned short int ddr3_sratio;		/* 0x0080 */
-	unsigned short int iclkout;		/* 0x0000 */
-	unsigned short int dt0rdsratio0;	/* 0x003A */
-	unsigned short int dt0wdsratio0;	/* 0x003F */
-	unsigned short int dt0fwsratio0;	/* 0x009F */
-	unsigned short int dt0wrsratio0;	/* 0x0079 */
-	unsigned int sdram_tim1;		/* 0x0888A39B */
-	unsigned int sdram_tim2;		/* 0x26247FDA */
-	unsigned int sdram_tim3;		/* 0x501F821F */
-	unsigned int emif_ddr_phy_ctlr_1;	/* 0x00100206 */
-	unsigned int sdram_config;		/* 0x61A44A32 */
-	unsigned int ref_ctrl;			/* 0x0000093B */
-	unsigned int ioctr_val;			/* 0x0000014A */
-	char manu_name[32];			/* "default@303MHz \0" */
-	char manu_marking[32];			/* "default \0" */
-};
-
-struct chip_data {
-	unsigned int  magic;
-	char sdevname[16];
-	char shwver[7];
-};
-
-struct dxr2_baseboard_id {
-	struct ddr3_data ddr3;
-	struct chip_data chip;
-};
-
-/*
- * We have three pin mux functions that must exist.  We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_uart1_pin_mux(void);
-void enable_uart2_pin_mux(void);
-void enable_uart3_pin_mux(void);
-void enable_uart4_pin_mux(void);
-void enable_uart5_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif