diff options
Diffstat (limited to 'board/siemens/IAD210')
-rw-r--r-- | board/siemens/IAD210/IAD210.c | 28 | ||||
-rw-r--r-- | board/siemens/IAD210/atm.c | 26 | ||||
-rw-r--r-- | board/siemens/IAD210/atm.h | 4 | ||||
-rw-r--r-- | board/siemens/IAD210/flash.c | 18 | ||||
-rw-r--r-- | board/siemens/IAD210/u-boot.lds | 3 |
5 files changed, 40 insertions, 39 deletions
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c index 9c0ff02..e21bb24 100644 --- a/board/siemens/IAD210/IAD210.c +++ b/board/siemens/IAD210/IAD210.c @@ -102,7 +102,7 @@ const uint sdram_table[] = { phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile iop8xx_t *iop = &immap->im_ioport; volatile fec_t *fecp = &immap->im_cpm.cp_fec; @@ -117,7 +117,7 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; memctl->memc_mar = 0x00000088; @@ -126,10 +126,10 @@ phys_size_t initdram (int board_type) * preliminary addresses - these have to be modified after the * SDRAM size has been determined. */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; + memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; + memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); @@ -155,20 +155,20 @@ phys_size_t initdram (int board_type) * Check Bank 0 Memory Size for re-configuration * */ - size = dram_size (CFG_MAMR, (long *) SDRAM_BASE_PRELIM, + size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE); udelay (1000); - memctl->memc_mamr = CFG_MAMR; + memctl->memc_mamr = CONFIG_SYS_MAMR; udelay (1000); /* * Final mapping */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR2_PRELIM; - memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); + memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM; + memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); udelay (10000); @@ -195,7 +195,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; @@ -219,7 +219,7 @@ void board_serial_init (void) void board_ether_init (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile iop8xx_t *iop = &immap->im_ioport; volatile fec_t *fecp = &immap->im_cpm.cp_fec; @@ -230,7 +230,7 @@ void board_ether_init (void) int board_early_init_f (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile iop8xx_t *iop = &immap->im_ioport; @@ -240,7 +240,7 @@ int board_early_init_f (void) iop->iop_padir = 0x0800; /* start timer 2 for the 4hz LED blink rate */ - timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */ + timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */ timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */ timers->cpmt_tgcr = 0x00000810; /* run timer 2 */ @@ -261,7 +261,7 @@ int board_early_init_f (void) void board_get_enetaddr (uchar * addr) { int i; - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile cpm8xx_t *cpm = &immap->im_cpm; unsigned int rccrtmp; diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c index 1b27f33..e599c10 100644 --- a/board/siemens/IAD210/atm.c +++ b/board/siemens/IAD210/atm.c @@ -57,7 +57,7 @@ void atmUtpInit(void); ****************************************************************************/ int atmLoad() { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; volatile iop8xx_t *iop = &immap->im_ioport; @@ -91,7 +91,7 @@ int atmLoad() ****************************************************************************/ void atmUnload() { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; volatile iop8xx_t *iop = &immap->im_ioport; @@ -141,11 +141,11 @@ void atmUnload() int atmMemInit() { int i; - unsigned immr = CFG_IMMR; + unsigned immr = CONFIG_SYS_IMMR; int total_num_rbd = 0; int total_num_tbd = 0; - memset((char *)CFG_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE); + memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE); g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY; @@ -226,11 +226,11 @@ void atmIntInit() void atmApcInit() { int i; - /* unsigned immr = CFG_IMMR; */ - uint16 * mphypt_ptr = MPHYPT_PTR(CFG_IMMR); - struct apc_params_t * apcp_ptr = APCP_PTR(CFG_IMMR); - uint16 * apct_prio1_ptr = APCT1_PTR(CFG_IMMR); - uint16 * tq_ptr = TQ_PTR(CFG_IMMR); + /* unsigned immr = CONFIG_SYS_IMMR; */ + uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR); + struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR); + uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR); + uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR); /***************************************************/ /* Initialize MPHY Pointing Table (only one entry) */ /***************************************************/ @@ -290,7 +290,7 @@ void atmApcInit() ****************************************************************************/ void atmAmtInit() { - unsigned immr = CFG_IMMR; + unsigned immr = CONFIG_SYS_IMMR; g_atm.am_top = AM_PTR(immr); g_atm.ap_top = AP_PTR(immr); @@ -315,7 +315,7 @@ void atmAmtInit() ****************************************************************************/ void atmCpmInit() { - unsigned immr = CFG_IMMR; + unsigned immr = CONFIG_SYS_IMMR; memset((char *)immr + 0x3F00, 0x00, 0xC0); @@ -551,7 +551,7 @@ void atmCpmInit() ****************************************************************************/ void atmUtpInit() { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile iop8xx_t *iop = &immap->im_ioport; volatile car8xx_t *car = &immap->im_clkrst; volatile cpm8xx_t *cpm = &immap->im_cpm; @@ -579,7 +579,7 @@ void atmUtpInit() /* 11 = divide by 7 */ /* */ /* Note that the UTOPIA clock must be programmed as to operate */ - /* within the range SYSCLK/10 .. 50Mhz. */ + /* within the range SYSCLK/10 .. 50MHz. */ /*-----------------------------------------------------------------*/ car->car_sccr &= 0xFFFFFFE0; car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */ diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h index 71b0497..cd5b45e 100644 --- a/board/siemens/IAD210/atm.h +++ b/board/siemens/IAD210/atm.h @@ -6,9 +6,9 @@ typedef volatile unsigned short vuint16; typedef volatile unsigned int vuint32; -#define DPRAM_ATM CFG_IMMR + 0x3000 +#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000 -#define ATM_DPRAM_BEGIN (DPRAM_ATM - CFG_IMMR - 0x2000) +#define ATM_DPRAM_BEGIN (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000) #define NUM_CONNECTIONS 1 #define SAR_RXB_SIZE 1584 #define AM_HMASK 0x0FFFFFF0 diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c index 110858d..c262e0f 100644 --- a/board/siemens/IAD210/flash.c +++ b/board/siemens/IAD210/flash.c @@ -24,7 +24,7 @@ #include <common.h> #include <mpc8xx.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Functions @@ -38,13 +38,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info); unsigned long flash_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long size; int i; /* Init: no FLASHes known */ - for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } @@ -59,13 +59,13 @@ unsigned long flash_init (void) /* Remap FLASH according to real size */ - memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; + memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); + memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]); + size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]); + flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_info[0].size = size; @@ -368,7 +368,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) last = start; addr = (vu_long*)(info->start[l_sect]); while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -491,7 +491,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) /* data polling for D7 */ start = get_timer (0); while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return (1); } } diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds index 291f6b3..47677c6 100644 --- a/board/siemens/IAD210/u-boot.lds +++ b/board/siemens/IAD210/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS cpu/mpc8xx/interrupts.o (.text) lib_ppc/time.o (.text) . = env_offset; - common/environment.o(.text) + common/env_embedded.o(.text) *(.text) *(.fixup) @@ -132,6 +132,7 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) + . = ALIGN(4); } _end = . ; PROVIDE (end = .); |