summaryrefslogtreecommitdiff
path: root/board/siemens/CCM/ccm.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/siemens/CCM/ccm.c')
-rw-r--r--board/siemens/CCM/ccm.c80
1 files changed, 40 insertions, 40 deletions
diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c
index d653763..8053da4 100644
--- a/board/siemens/CCM/ccm.c
+++ b/board/siemens/CCM/ccm.c
@@ -133,7 +133,7 @@ int checkboard (void)
int power_on_reset(void)
{
/* Test Reset Status Register */
- return ((volatile immap_t *)CFG_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
+ return ((volatile immap_t *)CONFIG_SYS_IMMR)->im_clkrst.car_rsr & RSR_CSRS ? 0:1;
}
#define PB_LED_GREEN 0x10000 /* red LED is on PB.15 */
@@ -142,7 +142,7 @@ int power_on_reset(void)
static void init_leds (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
immap->im_cpm.cp_pbpar &= ~PB_LEDS;
immap->im_cpm.cp_pbodr &= ~PB_LEDS;
@@ -157,7 +157,7 @@ static void init_leds (void)
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size8, size9;
long int size = 0;
@@ -171,7 +171,7 @@ phys_size_t initdram (int board_type)
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
- memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
@@ -180,10 +180,10 @@ phys_size_t initdram (int board_type)
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
- memctl->memc_or2 = CFG_OR2_PRELIM;
- memctl->memc_br2 = CFG_BR2_PRELIM;
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay(200);
@@ -203,21 +203,21 @@ phys_size_t initdram (int board_type)
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size = size9;
/* debug ("SDRAM in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
udelay(500);
/* debug ("SDRAM in 8 column mode: %ld MB\n", size >> 20); */
}
@@ -230,7 +230,7 @@ phys_size_t initdram (int board_type)
*/
if (size < 0x02000000) {
/* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
udelay(1000);
}
@@ -238,13 +238,13 @@ phys_size_t initdram (int board_type)
* Final mapping
*/
- memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
- memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+ memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
- reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
can_driver_enable ();
@@ -263,7 +263,7 @@ phys_size_t initdram (int board_type)
*/
void can_driver_enable (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Initialize MBMR */
@@ -302,13 +302,13 @@ void can_driver_enable (void)
memctl->memc_mcr = 0x011C | UPMB;
/* Initialize OR3 / BR3 for CAN Bus Controller */
- memctl->memc_or3 = CFG_OR3_CAN;
- memctl->memc_br3 = CFG_BR3_CAN;
+ memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
+ memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
}
void can_driver_disable (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Reset OR3 / BR3 to disable CAN Bus Controller */
@@ -331,7 +331,7 @@ void can_driver_disable (void)
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
@@ -341,24 +341,24 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize
/* ------------------------------------------------------------------------- */
-#define ETH_CFG_BITS (CFG_PB_ETH_CFG1 | CFG_PB_ETH_CFG2 | CFG_PB_ETH_CFG3 )
+#define ETH_CFG_BITS (CONFIG_SYS_PB_ETH_CFG1 | CONFIG_SYS_PB_ETH_CFG2 | CONFIG_SYS_PB_ETH_CFG3 )
-#define ETH_ALL_BITS (ETH_CFG_BITS | CFG_PB_ETH_POWERDOWN)
+#define ETH_ALL_BITS (ETH_CFG_BITS | CONFIG_SYS_PB_ETH_POWERDOWN)
void reset_phy(void)
{
- immap_t *immr = (immap_t *)CFG_IMMR;
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
ulong value;
/* Configure all needed port pins for GPIO */
-#ifdef CFG_ETH_MDDIS_VALUE
- immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS;
+#ifdef CONFIG_SYS_ETH_MDDIS_VALUE
+ immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_MDDIS;
#else
- immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET); /* Set low */
+ immr->im_ioport.iop_padat &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET); /* Set low */
#endif
- immr->im_ioport.iop_papar &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET); /* GPIO */
- immr->im_ioport.iop_paodr &= ~(CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET); /* active output */
- immr->im_ioport.iop_padir |= CFG_PA_ETH_MDDIS | CFG_PA_ETH_RESET; /* output */
+ immr->im_ioport.iop_papar &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET); /* GPIO */
+ immr->im_ioport.iop_paodr &= ~(CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET); /* active output */
+ immr->im_ioport.iop_padir |= CONFIG_SYS_PA_ETH_MDDIS | CONFIG_SYS_PA_ETH_RESET; /* output */
immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS); /* GPIO */
immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS); /* active output */
@@ -366,23 +366,23 @@ void reset_phy(void)
value = immr->im_cpm.cp_pbdat;
/* Assert Powerdown and Reset signals */
- value |= CFG_PB_ETH_POWERDOWN;
+ value |= CONFIG_SYS_PB_ETH_POWERDOWN;
/* PHY configuration includes MDDIS and CFG1 ... CFG3 */
-#ifdef CFG_ETH_CFG1_VALUE
- value |= CFG_PB_ETH_CFG1;
+#ifdef CONFIG_SYS_ETH_CFG1_VALUE
+ value |= CONFIG_SYS_PB_ETH_CFG1;
#else
- value &= ~(CFG_PB_ETH_CFG1);
+ value &= ~(CONFIG_SYS_PB_ETH_CFG1);
#endif
-#ifdef CFG_ETH_CFG2_VALUE
- value |= CFG_PB_ETH_CFG2;
+#ifdef CONFIG_SYS_ETH_CFG2_VALUE
+ value |= CONFIG_SYS_PB_ETH_CFG2;
#else
- value &= ~(CFG_PB_ETH_CFG2);
+ value &= ~(CONFIG_SYS_PB_ETH_CFG2);
#endif
-#ifdef CFG_ETH_CFG3_VALUE
- value |= CFG_PB_ETH_CFG3;
+#ifdef CONFIG_SYS_ETH_CFG3_VALUE
+ value |= CONFIG_SYS_PB_ETH_CFG3;
#else
- value &= ~(CFG_PB_ETH_CFG3);
+ value &= ~(CONFIG_SYS_PB_ETH_CFG3);
#endif
/* Drive output signals to initial state */
@@ -391,11 +391,11 @@ void reset_phy(void)
udelay (10000);
/* De-assert Ethernet Powerdown */
- immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
+ immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */
udelay (10000);
/* de-assert RESET signal of PHY */
- immr->im_ioport.iop_padat |= CFG_PA_ETH_RESET;
+ immr->im_ioport.iop_padat |= CONFIG_SYS_PA_ETH_RESET;
udelay (1000);
}
generated by cgit v1.1 at 2024-11-05 13:51:09 +0000