diff options
Diffstat (limited to 'board/seco')
| -rw-r--r-- | board/seco/Kconfig | 63 | ||||
| -rw-r--r-- | board/seco/common/Makefile | 2 | ||||
| -rw-r--r-- | board/seco/common/mx6.c | 138 | ||||
| -rw-r--r-- | board/seco/common/mx6.h | 9 | ||||
| -rw-r--r-- | board/seco/mx6quq7/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/seco/mx6quq7/Makefile | 7 | ||||
| -rw-r--r-- | board/seco/mx6quq7/mx6quq7-2g.cfg | 173 | ||||
| -rw-r--r-- | board/seco/mx6quq7/mx6quq7.c | 162 |
8 files changed, 560 insertions, 0 deletions
diff --git a/board/seco/Kconfig b/board/seco/Kconfig new file mode 100644 index 0000000..dcb1ac8 --- /dev/null +++ b/board/seco/Kconfig @@ -0,0 +1,63 @@ +if TARGET_SECOMX6 + +choice + prompt "SECO i.MX6 Board variant" + +config SECOMX6_Q7 + bool "Q7" + +config SECOMX6_UQ7 + bool "uQ7" + +config SECOMX6_USBC + bool "uSBC" + +endchoice + +choice + prompt "SECO i.MX6 SoC variant" + +config SECOMX6Q + bool "i.MX6Q" + select MX6Q + +config SECOMX6DL + bool "i.MX6DL" + select MX6DL + +config SECOMX6S + bool "i.MX6S" + select MX6S + +endchoice + +choice + prompt "DDR size" + +config SECOMX6_512MB + bool "512MB" + +config SECOMX6_1GB + bool "1GB" + +config SECOMX6_2GB + bool "2GB" + +config SECOMX6_4GB + bool "4GB" + +endchoice + +config IMX_CONFIG + default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB + +config SYS_BOARD + default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +config SYS_VENDOR + default "seco" + +config SYS_CONFIG_NAME + default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +endif diff --git a/board/seco/common/Makefile b/board/seco/common/Makefile new file mode 100644 index 0000000..9e37ebb --- /dev/null +++ b/board/seco/common/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_TARGET_SECOMX6) += mx6.o diff --git a/board/seco/common/mx6.c b/board/seco/common/mx6.c new file mode 100644 index 0000000..2f14f59 --- /dev/null +++ b/board/seco/common/mx6.c @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +void seco_mx6_setup_uart_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +void seco_mx6_setup_enet_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); +} + +int seco_mx6_rgmii_rework(struct phy_device *phydev) +{ + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + + /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); + return 0; +} + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +void seco_mx6_setup_usdhc_iomux(int id) +{ + switch (id) { + case 3: + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads)); + break; + + case 4: + imx_iomux_v3_setup_multiple_pads(usdhc4_pads, + ARRAY_SIZE(usdhc4_pads)); + break; + + default: + printf("Warning: invalid usdhc id (%d)\n", id); + break; + } +} diff --git a/board/seco/common/mx6.h b/board/seco/common/mx6.h new file mode 100644 index 0000000..a05db67 --- /dev/null +++ b/board/seco/common/mx6.h @@ -0,0 +1,9 @@ +#ifndef __SECO_COMMON_MX6_H +#define __SECO_COMMON_MX6_H + +void seco_mx6_setup_uart_iomux(void); +void seco_mx6_setup_enet_iomux(void); +int seco_mx6_rgmii_rework(struct phy_device *phydev); +void seco_mx6_setup_usdhc_iomux(int id); + +#endif /* __SECO_COMMON_MX6_H */ diff --git a/board/seco/mx6quq7/MAINTAINERS b/board/seco/mx6quq7/MAINTAINERS new file mode 100644 index 0000000..60fd4ca --- /dev/null +++ b/board/seco/mx6quq7/MAINTAINERS @@ -0,0 +1,6 @@ +MX6QUQ7 BOARD +M: Boris Brezillon <boris.brezillon@free-electrons.com> +S: Maintained +F: board/seco/mx6quq7/ +F: include/configs/secomx6quq7.h +F: configs/secomx6quq7_defconfig diff --git a/board/seco/mx6quq7/Makefile b/board/seco/mx6quq7/Makefile new file mode 100644 index 0000000..bbf1d68 --- /dev/null +++ b/board/seco/mx6quq7/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 ECA Sinters +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6quq7.o diff --git a/board/seco/mx6quq7/mx6quq7-2g.cfg b/board/seco/mx6quq7/mx6quq7-2g.cfg new file mode 100644 index 0000000..159120e --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7-2g.cfg @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2013 Seco USA Inc + * + * SPDX-License-Identifier: GPL-2.0 + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* DDR IO TYPE */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* DATA STROBE */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 + +/* DATA */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 +/* ADDRESS */ +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 +DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 +DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 + +/* CONTROL */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 + +/* CLOCK */ +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 + +/* + * DDR3 SETTINGS + * Read Data Bit Delay + */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + + +/* Write Leveling */ +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F + +/* DQS gating, read delay, write delay calibration values */ +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C + +/* Read calibration */ +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45 + +/* write calibration */ +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C + +/* Complete calibration by forced measurement: */ +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 + +/* + * MMDC init: + * in DDR3, 64-bit mode, only MMDC0 is init + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 + +DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB + +DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 + +/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */ +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 + +/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */ +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 + +/* Initialize DDR3 on CS_0 and CS_1 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 + +/* P0 01c */ +/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 + +/*ZQ - Calibrationi */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 + +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 + +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 + +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF + +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F + diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c new file mode 100644 index 0000000..ea1d4b8 --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#include "../common/mx6.h" + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +int board_early_init_f(void) +{ + seco_mx6_setup_uart_iomux(); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + seco_mx6_rgmii_rework(phydev); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret = 0; + + seco_mx6_setup_enet_iomux(); + +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return -ENOMEM; + + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return -ENOMEM; + } + + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + free(phydev); + free(bus); + printf("FEC MXC: %s:failed\n", __func__); + } +#endif + + return ret; +} + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC3_BASE_ADDR}, + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + u32 index = 0; + int ret; + + /* + * Following map is done: + * (U-boot device node) (Physical Port) + * mmc0 eMMC on Board + * mmc1 Ext SD + */ + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + seco_mx6_setup_usdhc_iomux(3); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + break; + case 1: + seco_mx6_setup_usdhc_iomux(4); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + + default: + printf("Warning: %d exceed maximum number of SD ports %d\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + if (ret) + return ret; + } + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 | + MUX_PAD_CTRL(NO_PAD_CTRL)); + + gpio_direction_output(IMX_GPIO_NR(2, 4), 0); + + /* Set Low */ + gpio_set_value(IMX_GPIO_NR(2, 4), 0); + udelay(1000); + + /* Set High */ + gpio_set_value(IMX_GPIO_NR(2, 4), 1); + + return 0; +} + +int checkboard(void) +{ + puts("Board: SECO uQ7\n"); + + return 0; +} |