diff options
Diffstat (limited to 'board/sc520_cdp')
| -rw-r--r-- | board/sc520_cdp/Makefile | 14 | ||||
| -rw-r--r-- | board/sc520_cdp/sc520_cdp.c | 239 | ||||
| -rw-r--r-- | board/sc520_cdp/sc520_cdp_pci.c | 271 |
3 files changed, 279 insertions, 245 deletions
diff --git a/board/sc520_cdp/Makefile b/board/sc520_cdp/Makefile index 0d2800d..7944a01 100644 --- a/board/sc520_cdp/Makefile +++ b/board/sc520_cdp/Makefile @@ -28,12 +28,14 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := sc520_cdp.o flash.o -SOBJS := sc520_cdp_asm.o sc520_cdp_asm16.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +COBJS-y += sc520_cdp.o +COBJS-y += flash.o +COBJS-$(CONFIG_PCI) += sc520_cdp_pci.o +SOBJS-y += sc520_cdp_asm.o +SOBJS-y += sc520_cdp_asm16.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index 9312f4f..4c44b24 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -23,11 +23,8 @@ */ #include <common.h> -#include <pci.h> #include <asm/io.h> -#include <asm/pci.h> #include <asm/ic/sc520.h> -#include <asm/ic/pci.h> #include <ali512x.h> #include <spi.h> #include <netdev.h> @@ -114,87 +111,6 @@ static void irq_init(void) sc520_mmcr->eccmap = 0x100; /* Map SDRAM ECC failure INT to NMI */ } -#ifdef CONFIG_PCI -/* PCI stuff */ -static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) -{ - /* a configurable lists of irqs to steal - * when we need one (a board with more pci interrupt pins - * would use a larger table */ - static int irq_list[] = { - CONFIG_SYS_FIRST_PCI_IRQ, - CONFIG_SYS_SECOND_PCI_IRQ, - CONFIG_SYS_THIRD_PCI_IRQ, - CONFIG_SYS_FORTH_PCI_IRQ - }; - static int next_irq_index=0; - - uchar tmp_pin; - int pin; - - pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); - pin = tmp_pin; - - pin-=1; /* pci config space use 1-based numbering */ - if (-1 == pin) { - return; /* device use no irq */ - } - - - /* map device number + pin to a pin on the sc520 */ - switch (PCI_DEV(dev)) { - case 20: - pin+=SC520_PCI_INTA; - break; - - case 19: - pin+=SC520_PCI_INTB; - break; - - case 18: - pin+=SC520_PCI_INTC; - break; - - case 17: - pin+=SC520_PCI_INTD; - break; - - default: - return; - } - - pin&=3; /* wrap around */ - - if (sc520_pci_ints[pin] == -1) { - /* re-route one interrupt for us */ - if (next_irq_index > 3) { - return; - } - if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { - return; - } - next_irq_index++; - } - - - if (-1 != sc520_pci_ints[pin]) { - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, - sc520_pci_ints[pin]); - } - PRINTF("fixup_irq: device %d pin %c irq %d\n", - PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); -} - -static struct pci_controller sc520_cdp_hose = { - fixup_irq: pci_sc520_cdp_fixup_irq, -}; - -void pci_init_board(void) -{ - pci_sc520_init(&sc520_cdp_hose); -} -#endif - static void silence_uart(int port) { outb(0, port+1); @@ -322,161 +238,6 @@ static void bus_init(void) */ /* - * This function should map a chunk of size bytes - * of the system address space to the ISA bus - * - * The function will return the memory address - * as seen by the host (which may very will be the - * same as the bus address) - */ -u32 isa_map_rom(u32 bus_addr, int size) -{ - u32 par; - - PRINTF("isa_map_rom asked to map %d bytes at %x\n", - size, bus_addr); - - par = size; - if (par < 0x80000) { - par = 0x80000; - } - par >>= 12; - par--; - par&=0x7f; - par <<= 18; - par |= (bus_addr>>12); - par |= 0x50000000; - - PRINTF ("setting PAR11 to %x\n", par); - - /* Map rom 0x10000 with PAR1 */ - sc520_mmcr->par[11] = par; - - return bus_addr; -} - -/* - * this function removed any mapping created - * with pci_get_rom_window() - */ -void isa_unmap_rom(u32 addr) -{ - PRINTF("isa_unmap_rom asked to unmap %x", addr); - if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) { - sc520_mmcr->par[11] = 0; - PRINTF(" done\n"); - return; - } - PRINTF(" not ours\n"); -} - -#ifdef CONFIG_PCI -#define PCI_ROM_TEMP_SPACE 0x10000 -/* - * This function should map a chunk of size bytes - * of the system address space to the PCI bus, - * suitable to map PCI ROMS (bus address < 16M) - * the function will return the host memory address - * which should be converted into a bus address - * before used to configure the PCI rom address - * decoder - */ -u32 pci_get_rom_window(struct pci_controller *hose, int size) -{ - u32 par; - - par = size; - if (par < 0x80000) { - par = 0x80000; - } - par >>= 16; - par--; - par&=0x7ff; - par <<= 14; - par |= (PCI_ROM_TEMP_SPACE>>16); - par |= 0x72000000; - - PRINTF ("setting PAR1 to %x\n", par); - - /* Map rom 0x10000 with PAR1 */ - sc520_mmcr->par[1] = par; - - return PCI_ROM_TEMP_SPACE; -} - -/* - * this function removed any mapping created - * with pci_get_rom_window() - */ -void pci_remove_rom_window(struct pci_controller *hose, u32 addr) -{ - PRINTF("pci_remove_rom_window: %x", addr); - if (addr == PCI_ROM_TEMP_SPACE) { - sc520_mmcr->par[1] = 0; - PRINTF(" done\n"); - return; - } - PRINTF(" not ours\n"); - -} - -/* - * This function is called in order to provide acces to the - * legacy video I/O ports on the PCI bus. - * After this function accesses to I/O ports 0x3b0-0x3bb and - * 0x3c0-0x3df shuld result in transactions on the PCI bus. - * - */ -int pci_enable_legacy_video_ports(struct pci_controller *hose) -{ - /* Map video memory to 0xa0000*/ - sc520_mmcr->par[0] = 0x7200400a; - - /* forward all I/O accesses to PCI */ - sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI; - - - /* so we map away all io ports to pci (only way to access pci io - * below 0x400. But then we have to map back the portions that we dont - * use so that the generate cycles on the GPIO bus where the sio and - * ISA slots are connected, this requre the use of several PAR registers - */ - - /* bring 0x100 - 0x1ef back to ISA using PAR5 */ - sc520_mmcr->par[5] = 0x30ef0100; - - /* IDE use 1f0-1f7 */ - - /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */ - sc520_mmcr->par[6] = 0x30ff01f8; - - /* com2 use 2f8-2ff */ - - /* bring 0x300 - 0x3af back to ISA using PAR7 */ - sc520_mmcr->par[7] = 0x30af0300; - - /* vga use 3b0-3bb */ - - /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ - sc520_mmcr->par[8] = 0x300303bc; - - /* vga use 3c0-3df */ - - /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */ - sc520_mmcr->par[9] = 0x301503e0; - - /* ide use 3f6 */ - - /* bring 0x3f7 back to ISA using PAR10 */ - sc520_mmcr->par[10] = 0x300003f7; - - /* com1 use 3f8-3ff */ - - return 0; -} -#endif - -/* * Miscelaneous platform dependent initialisations */ diff --git a/board/sc520_cdp/sc520_cdp_pci.c b/board/sc520_cdp/sc520_cdp_pci.c new file mode 100644 index 0000000..ccb7988 --- /dev/null +++ b/board/sc520_cdp/sc520_cdp_pci.c @@ -0,0 +1,271 @@ +/* + * + * (C) Copyright 2002 + * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <asm/ic/sc520.h> +#include <asm/ic/pci.h> + +DECLARE_GLOBAL_DATA_PTR; + +#undef SC520_CDP_DEBUG + +#ifdef SC520_CDP_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +{ + /* a configurable lists of irqs to steal + * when we need one (a board with more pci interrupt pins + * would use a larger table */ + static int irq_list[] = { + CONFIG_SYS_FIRST_PCI_IRQ, + CONFIG_SYS_SECOND_PCI_IRQ, + CONFIG_SYS_THIRD_PCI_IRQ, + CONFIG_SYS_FORTH_PCI_IRQ + }; + static int next_irq_index=0; + + uchar tmp_pin; + int pin; + + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); + pin = tmp_pin; + + pin-=1; /* pci config space use 1-based numbering */ + if (-1 == pin) { + return; /* device use no irq */ + } + + + /* map device number + pin to a pin on the sc520 */ + switch (PCI_DEV(dev)) { + case 20: + pin+=SC520_PCI_INTA; + break; + + case 19: + pin+=SC520_PCI_INTB; + break; + + case 18: + pin+=SC520_PCI_INTC; + break; + + case 17: + pin+=SC520_PCI_INTD; + break; + + default: + return; + } + + pin&=3; /* wrap around */ + + if (sc520_pci_ints[pin] == -1) { + /* re-route one interrupt for us */ + if (next_irq_index > 3) { + return; + } + if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { + return; + } + next_irq_index++; + } + + + if (-1 != sc520_pci_ints[pin]) { + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, + sc520_pci_ints[pin]); + } + PRINTF("fixup_irq: device %d pin %c irq %d\n", + PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); +} + +static struct pci_controller sc520_cdp_hose = { + fixup_irq: pci_sc520_cdp_fixup_irq, +}; + +void pci_init_board(void) +{ + pci_sc520_init(&sc520_cdp_hose); +} + +/* + * This function should map a chunk of size bytes + * of the system address space to the ISA bus + * + * The function will return the memory address + * as seen by the host (which may very will be the + * same as the bus address) + */ +u32 isa_map_rom(u32 bus_addr, int size) +{ + u32 par; + + PRINTF("isa_map_rom asked to map %d bytes at %x\n", + size, bus_addr); + + par = size; + if (par < 0x80000) { + par = 0x80000; + } + par >>= 12; + par--; + par&=0x7f; + par <<= 18; + par |= (bus_addr>>12); + par |= 0x50000000; + + PRINTF ("setting PAR11 to %x\n", par); + + /* Map rom 0x10000 with PAR1 */ + sc520_mmcr->par[11] = par; + + return bus_addr; +} + +/* + * this function removed any mapping created + * with pci_get_rom_window() + */ +void isa_unmap_rom(u32 addr) +{ + PRINTF("isa_unmap_rom asked to unmap %x", addr); + if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) { + sc520_mmcr->par[11] = 0; + PRINTF(" done\n"); + return; + } + PRINTF(" not ours\n"); +} + +#define PCI_ROM_TEMP_SPACE 0x10000 +/* + * This function should map a chunk of size bytes + * of the system address space to the PCI bus, + * suitable to map PCI ROMS (bus address < 16M) + * the function will return the host memory address + * which should be converted into a bus address + * before used to configure the PCI rom address + * decoder + */ +u32 pci_get_rom_window(struct pci_controller *hose, int size) +{ + u32 par; + + par = size; + if (par < 0x80000) { + par = 0x80000; + } + par >>= 16; + par--; + par&=0x7ff; + par <<= 14; + par |= (PCI_ROM_TEMP_SPACE>>16); + par |= 0x72000000; + + PRINTF ("setting PAR1 to %x\n", par); + + /* Map rom 0x10000 with PAR1 */ + sc520_mmcr->par[1] = par; + + return PCI_ROM_TEMP_SPACE; +} + +/* + * this function removed any mapping created + * with pci_get_rom_window() + */ +void pci_remove_rom_window(struct pci_controller *hose, u32 addr) +{ + PRINTF("pci_remove_rom_window: %x", addr); + if (addr == PCI_ROM_TEMP_SPACE) { + sc520_mmcr->par[1] = 0; + PRINTF(" done\n"); + return; + } + PRINTF(" not ours\n"); + +} + +/* + * This function is called in order to provide acces to the + * legacy video I/O ports on the PCI bus. + * After this function accesses to I/O ports 0x3b0-0x3bb and + * 0x3c0-0x3df shuld result in transactions on the PCI bus. + * + */ +int pci_enable_legacy_video_ports(struct pci_controller *hose) +{ + /* Map video memory to 0xa0000*/ + sc520_mmcr->par[0] = 0x7200400a; + + /* forward all I/O accesses to PCI */ + sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI; + + + /* so we map away all io ports to pci (only way to access pci io + * below 0x400. But then we have to map back the portions that we dont + * use so that the generate cycles on the GPIO bus where the sio and + * ISA slots are connected, this requre the use of several PAR registers + */ + + /* bring 0x100 - 0x1ef back to ISA using PAR5 */ + sc520_mmcr->par[5] = 0x30ef0100; + + /* IDE use 1f0-1f7 */ + + /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */ + sc520_mmcr->par[6] = 0x30ff01f8; + + /* com2 use 2f8-2ff */ + + /* bring 0x300 - 0x3af back to ISA using PAR7 */ + sc520_mmcr->par[7] = 0x30af0300; + + /* vga use 3b0-3bb */ + + /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ + sc520_mmcr->par[8] = 0x300303bc; + + /* vga use 3c0-3df */ + + /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */ + sc520_mmcr->par[9] = 0x301503e0; + + /* ide use 3f6 */ + + /* bring 0x3f7 back to ISA using PAR10 */ + sc520_mmcr->par[10] = 0x300003f7; + + /* com1 use 3f8-3ff */ + + return 0; +} |