diff options
Diffstat (limited to 'board/sbc8240/README')
| -rw-r--r-- | board/sbc8240/README | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/board/sbc8240/README b/board/sbc8240/README deleted file mode 100644 index 71595b4..0000000 --- a/board/sbc8240/README +++ /dev/null @@ -1,140 +0,0 @@ -The supported features of the SBC8240/8245 board are: - 8240 or 8245 processor - 66MHz & 100MHz bus speed - Decrementer timer - 1 UART channel (Console channel) - 8240 Interrupt Controller - 8240 PCI bridge - 8240 Memory Controller - SDRAM (16, 64 MB Memory DIMM) - FLASH 512K On board - FLASH 4MB On board - - -Memory Map from CPU point of view: - - Start Size Access to - ----------------------------------------------------- - 0x00000000 64MB SDRAM DIMM - 0xFF000000 4MB On Board FLASH - 0xFFF00000 512K On Board FLASH or SRAM (Configured by jumper) - 0xFFE00000 8K EEPROM - 0xFFE80000 8Bit LED - 0xFFF80000 8Bit UART - - -Setting the board Jumpers & Switches: - - In order to get the board running with the default configuration the - jumpers need to be set as follows: - - General Jumpers: - ____________________________________________ - | Jumpers | Jumpers | Jumpers | - |-------------|--------------|---------------| - |JP1 1-2 | JP14 1-2 | JP27 1-2 | - |JP5 Open | JP15 1-2 | JP28 2-3 | - |JP8 1-2 | JP16 1-2 | JP33 Open | - |JP9 1-2 | JP17 1-2 | JP37 Close | - |JP10 1-2 | JP18 1-2 | | - |JP11 2-3 | JP19 1-2 | | - |JP12 1-2 | JP20 1-2 | | - |JP13 1-2 | JP25 Open | | - |_____________|______________|_______________| - - Bus speed Jumpers: - _________________________ - | 100MHz Bus | 66 MHz Bus | - |------------|------------| - | JP2 1-2 | JP2 1-2 | - | JP3 1-2 | JP3 2-3 | - | JP4 1-2 | JP4 2-3 | - | JP6 1-2 | JP6 2-3 | - | JP7 1-2 | JP7 1-2 | - |____________|____________| - - -U-Boot 1.1.2 (Jun 24 2004 - 17:01:04) - -CPU: MPC8240 Revision 1.1 at 247.500 MHz: 16 kB I-Cache 16 kB D-Cache -Board: sbc8240 Revision 255 Local Bus at 99 MHz -DRAM: 64 MB -FLASH: 512 kB - 00 11 8086 1229 0200 00 -In: serial -Out: serial -Err: serial -Net: i82559#0 - -Welcome to U-Boot for the sbc8240 - -Type ? or help to get on-line help - -Hit any key to stop autoboot: 0 -=> printenv -bootcmd=version;echo;tftpboot $loadaddr $loadfile;bootvx -bootdelay=5 -baudrate=9600 -ethaddr=DE:AD:BE:EF:01:01 -ipaddr=192.168.193.102 -preboot=echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type "? or help" to get on-line help;echo -netmask=255.255.255.248 -clocks_in_mhz=1 -bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei -ipaddr=192.168.193.102 -loadfile=vxWorks.st -loadaddr=0x01000000 -net_load=tftpboot $loadaddr $loadfile -serverip=192.168.193.99 -ethact=i82559#0 -stdin=serial -stdout=serial -stderr=serial - -Environment size: 631/16380 bytes -=> boot - -U-Boot 1.1.2 (Jun 24 2004 - 17:01:04) - -Using i82559#0 device -TFTP from server 192.168.193.99; our IP address is 192.168.193.102 -Filename 'vxWorks.st'. -Load address: 0x1000000 -Loading: ################################################################# - ################################################################# - ############################################################## -done -Bytes transferred = 979927 (ef3d7 hex) -## Ethernet MAC address not copied to NV RAM -Loading .text @ 0x00100000 (758848 bytes) -Loading .data @ 0x001b9440 (79904 bytes) -Clearing .bss @ 0x001ccc60 (20288 bytes) -## Using bootline (@ 0x4200): $fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei -## Starting vxWorks at 0x00100000 ... - -Adding 2845 symbols for standalone. - - - ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] - ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] - ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] - ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) - ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] - ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] - ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] - ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]] - ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]] - ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]] - ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]] - ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]] - ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] - ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System - ]]]]]]]]]]]]]]]]]]]]]]]]]]]] - ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1 - ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6 - ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003 - - CPU: MPC8240 -- Wind River BSP. SBC8240 Board. Processor #0. - Memory Size: 0x2000000. BSP version 1.2/28. - --> |