diff options
Diffstat (limited to 'board/sbc8240/README')
| -rw-r--r-- | board/sbc8240/README | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/board/sbc8240/README b/board/sbc8240/README new file mode 100644 index 0000000..703565d --- /dev/null +++ b/board/sbc8240/README @@ -0,0 +1,140 @@ +The supported features of the SBC8240/8245 board are: + 8240 or 8245 processor + 66MHz & 100MHz bus speed + Decrementer timer + 1 UART channel (Console channel) + 8240 Interrupt Controller + 8240 PCI bridge + 8240 Memory Controller + SDRAM (16, 64 MB Memory DIMM) + FLASH 512K On board + FLASH 4MB On board + + +Memory Map from CPU point of view: + + Start Size Access to + ----------------------------------------------------- + 0x00000000 64MB SDRAM DIMM + 0xFF000000 4MB On Board FLASH + 0xFFF00000 512K On Board FLASH or SRAM (Configured by jumper) + 0xFFE00000 8K EEPROM + 0xFFE80000 8Bit LED + 0xFFF80000 8Bit UART + + +Setting the board Jumpers & Switches: + + In order to get the board running with the default configuration the + jumpers need to be set as follows: + + General Jumpers: + ____________________________________________ + | Jumpers | Jumpers | Jumpers | + |-------------|--------------|---------------| + |JP1 1-2 | JP14 1-2 | JP27 1-2 | + |JP5 Open | JP15 1-2 | JP28 2-3 | + |JP8 1-2 | JP16 1-2 | JP33 Open | + |JP9 1-2 | JP17 1-2 | JP37 Close | + |JP10 1-2 | JP18 1-2 | | + |JP11 2-3 | JP19 1-2 | | + |JP12 1-2 | JP20 1-2 | | + |JP13 1-2 | JP25 Open | | + |_____________|______________|_______________| + + Bus speed Jumpers: + _________________________ + | 100MHz Bus | 66 MHz Bus | + |------------|------------| + | JP2 1-2 | JP2 1-2 | + | JP3 1-2 | JP3 2-3 | + | JP4 1-2 | JP4 2-3 | + | JP6 1-2 | JP6 2-3 | + | JP7 1-2 | JP7 1-2 | + |____________|____________| + + +U-Boot 1.1.2 (Jun 24 2004 - 17:01:04) + +CPU: MPC8240 Revision 1.1 at 247.500 MHz: 16 kB I-Cache 16 kB D-Cache +Board: sbc8240 Revision 255 Local Bus at 99 MHz +DRAM: 64 MB +FLASH: 512 kB + 00 11 8086 1229 0200 00 +In: serial +Out: serial +Err: serial +Net: i82559#0 + +Welcome to U-Boot for the sbc8240 + +Type ? or help to get on-line help + +Hit any key to stop autoboot: 0 +=> printenv +bootcmd=version;echo;tftpboot $loadaddr $loadfile;bootvx +bootdelay=5 +baudrate=9600 +ethaddr=DE:AD:BE:EF:01:01 +ipaddr=192.168.193.102 +preboot=echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type "? or help" to get on-line help;echo +netmask=255.255.255.248 +clocks_in_mhz=1 +bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei +ipaddr=192.168.193.102 +loadfile=vxWorks.st +loadaddr=0x01000000 +net_load=tftpboot $loadaddr $loadfile +serverip=192.168.193.99 +ethact=i82559#0 +stdin=serial +stdout=serial +stderr=serial + +Environment size: 631/16380 bytes +=> boot + +U-Boot 1.1.2 (Jun 24 2004 - 17:01:04) + +Using i82559#0 device +TFTP from server 192.168.193.99; our IP address is 192.168.193.102 +Filename 'vxWorks.st'. +Load address: 0x1000000 +Loading: ################################################################# + ################################################################# + ############################################################## +done +Bytes transferred = 979927 (ef3d7 hex) +## Ethernet MAC address not copied to NV RAM +Loading .text @ 0x00100000 (758848 bytes) +Loading .data @ 0x001b9440 (79904 bytes) +Clearing .bss @ 0x001ccc60 (20288 bytes) +## Using bootline (@ 0x4200): $fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei +## Starting vxWorks at 0x00100000 ... + +Adding 2845 symbols for standalone. + + + ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] + ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] + ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] + ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) + ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] + ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] + ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] + ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]] + ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]] + ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]] + ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]] + ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]] + ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] + ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System + ]]]]]]]]]]]]]]]]]]]]]]]]]]]] + ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1 + ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6 + ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003 + + CPU: MPC8240 -- Wind River BSP. SBC8240 Board. Processor #0. + Memory Size: 0x2000000. BSP version 1.2/28. + +-> |