summaryrefslogtreecommitdiff
path: root/board/sbc8240/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/sbc8240/README')
-rw-r--r--board/sbc8240/README140
1 files changed, 140 insertions, 0 deletions
diff --git a/board/sbc8240/README b/board/sbc8240/README
new file mode 100644
index 0000000..703565d
--- /dev/null
+++ b/board/sbc8240/README
@@ -0,0 +1,140 @@
+The supported features of the SBC8240/8245 board are:
+ 8240 or 8245 processor
+ 66MHz & 100MHz bus speed
+ Decrementer timer
+ 1 UART channel (Console channel)
+ 8240 Interrupt Controller
+ 8240 PCI bridge
+ 8240 Memory Controller
+ SDRAM (16, 64 MB Memory DIMM)
+ FLASH 512K On board
+ FLASH 4MB On board
+
+
+Memory Map from CPU point of view:
+
+ Start Size Access to
+ -----------------------------------------------------
+ 0x00000000 64MB SDRAM DIMM
+ 0xFF000000 4MB On Board FLASH
+ 0xFFF00000 512K On Board FLASH or SRAM (Configured by jumper)
+ 0xFFE00000 8K EEPROM
+ 0xFFE80000 8Bit LED
+ 0xFFF80000 8Bit UART
+
+
+Setting the board Jumpers & Switches:
+
+ In order to get the board running with the default configuration the
+ jumpers need to be set as follows:
+
+ General Jumpers:
+ ____________________________________________
+ | Jumpers | Jumpers | Jumpers |
+ |-------------|--------------|---------------|
+ |JP1 1-2 | JP14 1-2 | JP27 1-2 |
+ |JP5 Open | JP15 1-2 | JP28 2-3 |
+ |JP8 1-2 | JP16 1-2 | JP33 Open |
+ |JP9 1-2 | JP17 1-2 | JP37 Close |
+ |JP10 1-2 | JP18 1-2 | |
+ |JP11 2-3 | JP19 1-2 | |
+ |JP12 1-2 | JP20 1-2 | |
+ |JP13 1-2 | JP25 Open | |
+ |_____________|______________|_______________|
+
+ Bus speed Jumpers:
+ _________________________
+ | 100MHz Bus | 66 MHz Bus |
+ |------------|------------|
+ | JP2 1-2 | JP2 1-2 |
+ | JP3 1-2 | JP3 2-3 |
+ | JP4 1-2 | JP4 2-3 |
+ | JP6 1-2 | JP6 2-3 |
+ | JP7 1-2 | JP7 1-2 |
+ |____________|____________|
+
+
+U-Boot 1.1.2 (Jun 24 2004 - 17:01:04)
+
+CPU: MPC8240 Revision 1.1 at 247.500 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: sbc8240 Revision 255 Local Bus at 99 MHz
+DRAM: 64 MB
+FLASH: 512 kB
+ 00 11 8086 1229 0200 00
+In: serial
+Out: serial
+Err: serial
+Net: i82559#0
+
+Welcome to U-Boot for the sbc8240
+
+Type ? or help to get on-line help
+
+Hit any key to stop autoboot: 0
+=> printenv
+bootcmd=version;echo;tftpboot $loadaddr $loadfile;bootvx
+bootdelay=5
+baudrate=9600
+ethaddr=DE:AD:BE:EF:01:01
+ipaddr=192.168.193.102
+preboot=echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type "? or help" to get on-line help;echo
+netmask=255.255.255.248
+clocks_in_mhz=1
+bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei
+ipaddr=192.168.193.102
+loadfile=vxWorks.st
+loadaddr=0x01000000
+net_load=tftpboot $loadaddr $loadfile
+serverip=192.168.193.99
+ethact=i82559#0
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 631/16380 bytes
+=> boot
+
+U-Boot 1.1.2 (Jun 24 2004 - 17:01:04)
+
+Using i82559#0 device
+TFTP from server 192.168.193.99; our IP address is 192.168.193.102
+Filename 'vxWorks.st'.
+Load address: 0x1000000
+Loading: #################################################################
+ #################################################################
+ ##############################################################
+done
+Bytes transferred = 979927 (ef3d7 hex)
+## Ethernet MAC address not copied to NV RAM
+Loading .text @ 0x00100000 (758848 bytes)
+Loading .data @ 0x001b9440 (79904 bytes)
+Clearing .bss @ 0x001ccc60 (20288 bytes)
+## Using bootline (@ 0x4200): $fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei
+## Starting vxWorks at 0x00100000 ...
+
+Adding 2845 symbols for standalone.
+
+
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
+ ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
+ ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
+ ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
+ ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
+ ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
+ ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
+ ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
+ ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1
+ ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6
+ ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003
+
+ CPU: MPC8240 -- Wind River BSP. SBC8240 Board. Processor #0.
+ Memory Size: 0x2000000. BSP version 1.2/28.
+
+->