diff options
Diffstat (limited to 'board/sandburst/karef/karef.c')
| -rw-r--r-- | board/sandburst/karef/karef.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index 72ce976..7909d34 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -65,7 +65,7 @@ int board_early_init_f (void) mtsdr(sdr_pfc0, 0x00103E00); /* Setup access for LEDs, and system topology info */ - gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE; + gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS; gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS; @@ -93,7 +93,7 @@ int board_early_init_f (void) EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | EBC_BXAP_PEN_DISABLED); - mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | + mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); /*--------------------------------------------------------------------+ | 8KB NVRAM/RTC. Initialize bank 1 with default values. @@ -259,8 +259,8 @@ int checkboard (void) KAREF_FPGA_REGS_ST *karef_ps; OFEM_FPGA_REGS_ST *ofem_ps; - karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE; + karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; + ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; scan_id = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK) @@ -319,7 +319,7 @@ int checkboard (void) /* Fix the ack in the bme 32 */ udelay(5000); - out32(CFG_BME32_BASE + 0x0000000C, 0x00000001); + out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001); asm("eieio"); @@ -335,7 +335,7 @@ int misc_init_f (void) { /* Turn on i2c bus 1 */ puts ("I2C1: "); - i2c1_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); puts ("ready\n"); /* Turn on fans 3 & 4 */ @@ -397,8 +397,8 @@ int misc_init_r (void) } if( getenv("fakeled")) { - karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE; + karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; + ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK; karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK; setenv("bootdelay", "-1"); @@ -417,7 +417,7 @@ void ide_set_reset(int on) { KAREF_FPGA_REGS_ST *karef_ps; /* TODO: ide reset */ - karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE; + karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; if (on) { karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK; @@ -440,7 +440,7 @@ void fpga_init(void) /* Ensure we have power all around */ udelay(500); - karef_ps = (KAREF_FPGA_REGS_ST *)CFG_KAREF_FPGA_BASE; + karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; tmp = SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK | SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK | @@ -470,7 +470,7 @@ void fpga_init(void) SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK | SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK; - ofem_ps = (OFEM_FPGA_REGS_ST *)CFG_OFEM_FPGA_BASE; + ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; ofem_ps->reset_ul = tmp; ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT; |