diff options
Diffstat (limited to 'board/samsung/trats2/trats2.c')
| -rw-r--r-- | board/samsung/trats2/trats2.c | 108 |
1 files changed, 100 insertions, 8 deletions
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index d44d825..9552522 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -25,6 +25,9 @@ #include <power/max77693_fg.h> #include <libtizen.h> #include <errno.h> +#include <usb.h> +#include <usb/s3c_udc.h> +#include <usb_mass_storage.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,7 +43,7 @@ static void check_hw_revision(void) int modelrev = 0; int i; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* * GPM1[1:0]: MODEL_REV[1:0] @@ -90,7 +93,7 @@ static inline u32 get_model_rev(void) static void board_external_gpio_init(void) { - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* * some pins which in alive block are connected with external pull-up @@ -115,8 +118,8 @@ static void board_external_gpio_init(void) #ifdef CONFIG_SYS_I2C_INIT_BOARD static void board_init_i2c(void) { - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* I2C_7 */ s5p_gpio_direction_output(&gpio1->d0, 2, 1); @@ -147,7 +150,7 @@ static int pmic_init_max77686(void); int board_init(void) { struct exynos4_power *pwr = - (struct exynos4_power *)EXYNOS4X12_POWER_BASE; + (struct exynos4_power *)samsung_get_base_power(); gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; @@ -254,7 +257,7 @@ int board_mmc_init(bd_t *bis) { int err0, err2 = 0; - gpio2 = (struct exynos4x12_gpio_part2 *)EXYNOS4X12_GPIO_PART2_BASE; + gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2(); /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ s5p_gpio_direction_output(&gpio2->k0, 2, 1); @@ -308,6 +311,95 @@ int board_mmc_init(bd_t *bis) return err0 & err2; } +#ifdef CONFIG_USB_GADGET +static int s5pc210_phy_control(int on) +{ + int ret = 0; + unsigned int val; + struct pmic *p, *p_pmic, *p_muic; + + p_pmic = pmic_get("MAX77686_PMIC"); + if (!p_pmic) + return -ENODEV; + + if (pmic_probe(p_pmic)) + return -1; + + p_muic = pmic_get("MAX77693_MUIC"); + if (!p_muic) + return -ENODEV; + + if (pmic_probe(p_muic)) + return -1; + + if (on) { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON); + if (ret) + return -1; + + p = pmic_get("MAX77693_PMIC"); + if (!p) + return -ENODEV; + + if (pmic_probe(p)) + return -1; + + /* SAFEOUT */ + ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val); + if (ret) + return -1; + + val |= MAX77693_ENSAFEOUT1; + ret = pmic_reg_write(p, MAX77693_SAFEOUT, val); + if (ret) + return -1; + + /* PATH: USB */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_DN1DP2); + + } else { + ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM); + if (ret) + return -1; + + /* PATH: UART */ + ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1, + MAX77693_MUIC_CTRL1_UT1UR2); + } + + if (ret) + return -1; + + return 0; +} + +struct s3c_plat_otg_data s5pc210_otg_data = { + .phy_control = s5pc210_phy_control, + .regs_phy = EXYNOS4X12_USBPHY_BASE, + .regs_otg = EXYNOS4X12_USBOTG_BASE, + .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, + .usb_flags = PHY0_SLEEP, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + debug("USB_udc_probe\n"); + return s3c_udc_probe(&s5pc210_otg_data); +} + +#ifdef CONFIG_USB_CABLE_CHECK +int usb_cable_connected(void) +{ + struct pmic *muic = pmic_get("MAX77693_MUIC"); + if (!muic) + return 0; + + return !!muic->chrg->chrg_type(muic); +} +#endif +#endif + static int pmic_init_max77686(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); @@ -421,7 +513,7 @@ void exynos_lcd_power_on(void) { struct pmic *p = pmic_get("MAX77686_PMIC"); - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); /* LCD_2.2V_EN: GPC0[1] */ s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP); @@ -435,7 +527,7 @@ void exynos_lcd_power_on(void) void exynos_reset_lcd(void) { - gpio1 = (struct exynos4x12_gpio_part1 *)EXYNOS4X12_GPIO_PART1_BASE; + gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1(); /* reset lcd */ s5p_gpio_direction_output(&gpio1->f2, 1, 0); |