diff options
Diffstat (limited to 'board/samsung/smdk6400')
| -rw-r--r-- | board/samsung/smdk6400/lowlevel_init.S | 32 | ||||
| -rw-r--r-- | board/samsung/smdk6400/smdk6400.c | 6 | ||||
| -rw-r--r-- | board/samsung/smdk6400/u-boot-nand.lds | 2 |
3 files changed, 20 insertions, 20 deletions
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S index 034c810..e0119a7 100644 --- a/board/samsung/smdk6400/lowlevel_init.S +++ b/board/samsung/smdk6400/lowlevel_init.S @@ -2,7 +2,7 @@ * Memory Setup stuff - taken from blob memsetup.S * * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and - * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) * * Modified for the Samsung SMDK2410 by * (C) Copyright 2002 @@ -73,8 +73,8 @@ lowlevel_init: ldr r1, [r0] str r1, [r0] - ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000 - ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000 + ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000 + ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000 /* Disable all interrupts (VIC0 and VIC1) */ mvn r3, #0x0 @@ -107,11 +107,11 @@ lowlevel_init: bl mem_ctrl_asm_init /* Wakeup support. Don't know if it's going to be used, untested. */ - ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) - ldr r1, [r0] - bic r1, r1, #0xfffffff7 - cmp r1, #0x8 - beq wakeup_reset + ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset 1: mov lr, r12 @@ -124,10 +124,10 @@ wakeup_reset: ldr r1, [r0] str r1, [r0] - /* LED test */ - ldr r0, =ELFIN_GPIO_BASE - ldr r1, =0x3000 - str r1, [r0, #GPNDAT_OFFSET] + /* LED test */ + ldr r0, =ELFIN_GPIO_BASE + ldr r1, =0x3000 + str r1, [r0, #GPNDAT_OFFSET] /* Load return address and jump to kernel */ ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) @@ -201,7 +201,7 @@ wait_for_async: str r1, [r0, #MPLL_LOCK_OFFSET] /* Set Clock Divider */ - ldr r1, [r0, #CLK_DIV0_OFFSET] + ldr r1, [r0, #CLK_DIV0_OFFSET] bic r1, r1, #0x30000 bic r1, r1, #0xff00 bic r1, r1, #0xff @@ -252,7 +252,7 @@ uart_asm_init: /* set GPIO to enable UART */ ldr r0, =ELFIN_GPIO_BASE ldr r1, =0x220022 - str r1, [r0, #GPACON_OFFSET] + str r1, [r0, #GPACON_OFFSET] mov pc, lr #endif @@ -265,11 +265,11 @@ nand_asm_init: ldr r1, [r0, #NFCONF_OFFSET] orr r1, r1, #0x70 orr r1, r1, #0x7700 - str r1, [r0, #NFCONF_OFFSET] + str r1, [r0, #NFCONF_OFFSET] ldr r1, [r0, #NFCONT_OFFSET] orr r1, r1, #0x07 - str r1, [r0, #NFCONT_OFFSET] + str r1, [r0, #NFCONT_OFFSET] mov pc, lr #endif diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c index 77fd2c8..bd2e45a 100644 --- a/board/samsung/smdk6400/smdk6400.c +++ b/board/samsung/smdk6400/smdk6400.c @@ -107,12 +107,12 @@ ulong virt_to_phy_smdk6400(ulong addr) } #endif -#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY) +#if defined(CONFIG_CMD_NAND) && defined(CONFIG_SYS_NAND_LEGACY) #include <linux/mtd/nand.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; +extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; void nand_init(void) { - nand_probe(CFG_NAND_BASE); + nand_probe(CONFIG_SYS_NAND_BASE); if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) print_size(nand_dev_desc[0].totlen, "\n"); } diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index 132ab21..bd6b24f 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -57,6 +57,6 @@ SECTIONS . = ALIGN(4); __bss_start = .; - .bss : { *(.bss) } + .bss : { *(.bss) . = ALIGN(4); } _end = .; } |