summaryrefslogtreecommitdiff
path: root/board/samsung/smdk2400
diff options
context:
space:
mode:
Diffstat (limited to 'board/samsung/smdk2400')
-rw-r--r--board/samsung/smdk2400/Makefile51
-rw-r--r--board/samsung/smdk2400/config.mk25
-rw-r--r--board/samsung/smdk2400/flash.c490
-rw-r--r--board/samsung/smdk2400/lowlevel_init.S163
-rw-r--r--board/samsung/smdk2400/smdk2400.c112
-rw-r--r--board/samsung/smdk2400/u-boot.lds57
6 files changed, 898 insertions, 0 deletions
diff --git a/board/samsung/smdk2400/Makefile b/board/samsung/smdk2400/Makefile
new file mode 100644
index 0000000..90cb2b8
--- /dev/null
+++ b/board/samsung/smdk2400/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := smdk2400.o flash.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdk2400/config.mk b/board/samsung/smdk2400/config.mk
new file mode 100644
index 0000000..82400bf
--- /dev/null
+++ b/board/samsung/smdk2400/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# SAMSUNG board with S3C2400X (ARM920T) CPU
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SAMSUNG has 1 bank of 32 MB DRAM
+#
+# 0C00'0000 to 0E00'0000
+#
+# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
+# optionally with a ramdisk at 0c80'0000
+#
+# we load ourself to 0CF80000 (must be high enough not to be
+# overwritten by the uncompessing Linux kernel)
+#
+# download area is 0C80'0000
+#
+
+
+TEXT_BASE = 0x0CF80000
diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c
new file mode 100644
index 0000000..9eee60d
--- /dev/null
+++ b/board/samsung/smdk2400/flash.c
@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <environment.h>
+
+#define FLASH_BANK_SIZE 0x1000000 /* 2 x 8 MB */
+#define MAIN_SECT_SIZE 0x40000 /* 2 x 128 kB */
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY 0x00FF00FF
+#define CMD_IDENTIFY 0x00900090
+#define CMD_ERASE_SETUP 0x00200020
+#define CMD_ERASE_CONFIRM 0x00D000D0
+#define CMD_PROGRAM 0x00400040
+#define CMD_RESUME 0x00D000D0
+#define CMD_SUSPEND 0x00B000B0
+#define CMD_STATUS_READ 0x00700070
+#define CMD_STATUS_RESET 0x00500050
+
+#define BIT_BUSY 0x00800080
+#define BIT_ERASE_SUSPEND 0x00400040
+#define BIT_ERASE_ERROR 0x00200020
+#define BIT_PROGRAM_ERROR 0x00100010
+#define BIT_VPP_RANGE_ERROR 0x00080008
+#define BIT_PROGRAM_SUSPEND 0x00040004
+#define BIT_PROTECT_ERROR 0x00020002
+#define BIT_UNDEFINED 0x00010001
+
+#define BIT_SEQUENCE_ERROR 0x00300030
+#define BIT_TIMEOUT 0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+ int i, j;
+ ulong size = 0;
+
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+
+ flash_info[i].flash_id =
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
+ if (i == 0)
+ flashbase = CONFIG_SYS_FLASH_BASE;
+ else
+ panic ("configured too many flash banks!\n");
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ flash_info[i].start[j] = flashbase;
+
+ /* uniform sector size */
+ flashbase += MAIN_SECT_SIZE;
+ }
+ size += flash_info[i].size;
+ }
+
+ /*
+ * Protect monitor and environment sectors
+ */
+ flash_protect ( FLAG_PROTECT_SET,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
+
+ flash_protect ( FLAG_PROTECT_SET,
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
+
+#ifdef CONFIG_ENV_ADDR_REDUND
+ flash_protect ( FLAG_PROTECT_SET,
+ CONFIG_ENV_ADDR_REDUND,
+ CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SIZE_REDUND - 1,
+ &flash_info[0]);
+#endif
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
+ printf ("2x 28F640J3A (64Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+Done: ;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+ /* Check bit patterns */
+ /* SR.7=0 is busy, SR.7=1 is ready */
+ /* all other flags indicate error on 1 */
+ /* SR.0 is undefined */
+ /* Timeout is our faked flag */
+
+ /* sequence is described in Intel 290644-005 document */
+
+ /* check Timeout */
+ if (code & BIT_TIMEOUT) {
+ puts ("Timeout\n");
+ return ERR_TIMOUT;
+ }
+
+ /* check Busy, SR.7 */
+ if (~code & BIT_BUSY) {
+ puts ("Busy\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Vpp low, SR.3 */
+ if (code & BIT_VPP_RANGE_ERROR) {
+ puts ("Vpp range error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Device Protect Error, SR.1 */
+ if (code & BIT_PROTECT_ERROR) {
+ puts ("Device protect error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Command Seq Error, SR.4 & SR.5 */
+ if (code & BIT_SEQUENCE_ERROR) {
+ puts ("Command seqence error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Block Erase Error, SR.5 */
+ if (code & BIT_ERASE_ERROR) {
+ puts ("Block erase error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Program Error, SR.4 */
+ if (code & BIT_PROGRAM_ERROR) {
+ puts ("Program error\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Block Erase Suspended, SR.6 */
+ if (code & BIT_ERASE_SUSPEND) {
+ puts ("Block erase suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* check Program Suspended, SR.2 */
+ if (code & BIT_PROGRAM_SUSPEND) {
+ puts ("Program suspended\n");
+ return ERR_PROG_ERROR;
+ }
+
+ /* OK, no error */
+ return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ ulong result, result1;
+ int iflag, prot, sect;
+ int rc = ERR_OK;
+
+#ifdef USE_920T_MMU
+ int cflag;
+#endif
+
+ debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
+
+ /* first look for protection bits */
+
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (INTEL_MANUFACT & FLASH_VENDMASK)) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+#ifdef USE_920T_MMU
+ cflag = dcache_status ();
+ dcache_disable ();
+#endif
+ iflag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+ debug ("Erasing sector %2d @ %08lX... ",
+ sect, info->start[sect]);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *) (info->start[sect]);
+ ulong bsR7, bsR7_2, bsR5, bsR5_2;
+
+ /* *addr = CMD_STATUS_RESET; */
+ *addr = CMD_ERASE_SETUP;
+ *addr = CMD_ERASE_CONFIRM;
+
+ /* wait until flash is ready */
+ do {
+ /* check timeout */
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
+ *addr = CMD_STATUS_RESET;
+ result = BIT_TIMEOUT;
+ break;
+ }
+
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+ bsR7 = result & (1 << 7);
+ bsR7_2 = result & (1 << 23);
+ } while (!bsR7 | !bsR7_2);
+
+ *addr = CMD_STATUS_READ;
+ result1 = *addr;
+ bsR5 = result1 & (1 << 5);
+ bsR5_2 = result1 & (1 << 21);
+#ifdef SAMSUNG_FLASH_DEBUG
+ printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+ if (bsR5 != 0 && bsR5_2 != 0)
+ printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+#endif
+
+ *addr = CMD_READ_ARRAY;
+ *addr = CMD_RESUME;
+
+ if ((rc = flash_error (result)) != ERR_OK)
+ goto outahere;
+#if 0
+ printf ("ok.\n");
+ } else { /* it was protected */
+
+ printf ("protected!\n");
+#endif
+ }
+ }
+
+outahere:
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
+
+ if (iflag)
+ enable_interrupts ();
+
+#ifdef USE_920T_MMU
+ if (cflag)
+ dcache_enable ();
+#endif
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *) dest;
+ ulong result;
+ int rc = ERR_OK;
+ int iflag;
+
+#ifdef USE_920T_MMU
+ int cflag;
+#endif
+
+ /*
+ * Check if Flash is (sufficiently) erased
+ */
+ result = *addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
+
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+#ifdef USE_920T_MMU
+ cflag = dcache_status ();
+ dcache_disable ();
+#endif
+ iflag = disable_interrupts ();
+
+ /* *addr = CMD_STATUS_RESET; */
+ *addr = CMD_PROGRAM;
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait until flash is ready */
+ do {
+ /* check timeout */
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
+ *addr = CMD_SUSPEND;
+ result = BIT_TIMEOUT;
+ break;
+ }
+
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+ } while (~result & BIT_BUSY);
+
+ /* *addr = CMD_READ_ARRAY; */
+ *addr = CMD_STATUS_READ;
+ result = *addr;
+
+ rc = flash_error (result);
+
+ if (iflag)
+ enable_interrupts ();
+
+#ifdef USE_920T_MMU
+ if (cflag)
+ dcache_enable ();
+#endif
+ *addr = CMD_READ_ARRAY;
+ *addr = CMD_RESUME;
+ return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int l;
+ int i, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = *((vu_long *) src);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 4;
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return ERR_OK;
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *) cp << 24);
+ }
+
+ return write_word (info, wp, data);
+}
diff --git a/board/samsung/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S
new file mode 100644
index 0000000..a7959f3
--- /dev/null
+++ b/board/samsung/smdk2400/lowlevel_init.S
@@ -0,0 +1,163 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung development board by
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+/*
+ *
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
+ *
+ * Copyright (C) 2001 Samsung Electronics by chc, 010406
+ *
+ * S3C2400 specific tweaks.
+ *
+ */
+
+/* memory controller */
+#define BWSCON 0x14000000
+#define BANKCON3 0x14000010 /* for cs8900, ethernet */
+
+/* Bank0 */
+#define B0_Tacs 0x0 /* 0 clk */
+#define B0_Tcos 0x0 /* 0 clk */
+#define B0_Tacc 0x7 /* 14 clk */
+#define B0_Tcoh 0x0 /* 0 clk */
+#define B0_Tah 0x0 /* 0 clk */
+#define B0_Tacp 0x0
+#define B0_PMC 0x0 /* normal */
+
+/* Bank1 */
+#define B1_Tacs 0x0 /* 0 clk */
+#define B1_Tcos 0x0 /* 0 clk */
+#define B1_Tacc 0x7 /* 14 clk */
+#define B1_Tcoh 0x0 /* 0 clk */
+#define B1_Tah 0x0 /* 0 clk */
+#define B1_Tacp 0x0
+#define B1_PMC 0x0 /* normal */
+
+/* Bank2 */
+#define B2_Tacs 0x0 /* 0 clk */
+#define B2_Tcos 0x0 /* 0 clk */
+#define B2_Tacc 0x7 /* 14 clk */
+#define B2_Tcoh 0x0 /* 0 clk */
+#define B2_Tah 0x0 /* 0 clk */
+#define B2_Tacp 0x0
+#define B2_PMC 0x0 /* normal */
+
+/* Bank3 - setup for the cs8900 */
+#define B3_Tacs 0x0 /* 0 clk */
+#define B3_Tcos 0x3 /* 4 clk */
+#define B3_Tacc 0x7 /* 14 clk */
+#define B3_Tcoh 0x1 /* 1 clk */
+#define B3_Tah 0x0 /* 0 clk */
+#define B3_Tacp 0x3 /* 6 clk */
+#define B3_PMC 0x0 /* normal */
+
+/* Bank4 */
+#define B4_Tacs 0x0 /* 0 clk */
+#define B4_Tcos 0x0 /* 0 clk */
+#define B4_Tacc 0x7 /* 14 clk */
+#define B4_Tcoh 0x0 /* 0 clk */
+#define B4_Tah 0x0 /* 0 clk */
+#define B4_Tacp 0x0
+#define B4_PMC 0x0 /* normal */
+
+/* Bank5 */
+#define B5_Tacs 0x0 /* 0 clk */
+#define B5_Tcos 0x0 /* 0 clk */
+#define B5_Tacc 0x7 /* 14 clk */
+#define B5_Tcoh 0x0 /* 0 clk */
+#define B5_Tah 0x0 /* 0 clk */
+#define B5_Tacp 0x0
+#define B5_PMC 0x0 /* normal */
+
+/* Bank6 */
+#define B6_MT 0x3 /* SDRAM */
+#define B6_Trcd 0x1 /* 3clk */
+#define B6_SCAN 0x1 /* 9 bit */
+
+/* Bank7 */
+#define B7_MT 0x3 /* SDRAM */
+#define B7_Trcd 0x1 /* 3clk */
+#define B7_SCAN 0x1 /* 9 bit */
+
+/* refresh parameter */
+#define REFEN 0x1 /* enable refresh */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
+#define Trp 0x0 /* 2 clk */
+#define Trc 0x3 /* 7 clk */
+#define Tchr 0x2 /* 3 clk */
+
+#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
+
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl lowlevel_init
+lowlevel_init:
+ /* memory control configuration */
+ /* make r0 relative the current location so that it */
+ /* reads SMRDATA out of FLASH rather than memory ! */
+ ldr r0, =SMRDATA
+ ldr r1, _TEXT_BASE
+ sub r0, r0, r1
+ ldr r1, =BWSCON /* Bus Width Status Controller */
+ add r2, r0, #52
+0:
+ ldr r3, [r0], #4
+ str r3, [r1], #4
+ cmp r2, r0
+ bne 0b
+
+ /* everything is fine now */
+ mov pc, lr
+
+ .ltorg
+/* the literal pools origin */
+
+SMRDATA:
+ .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+ .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
+ .word 0x30 /* MRSR6, CL=3clk */
+ .word 0x30 /* MRSR7 */
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
new file mode 100644
index 0000000..4d1f1a6
--- /dev/null
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c2400.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int key_pressed(void);
+int mdm_init (bd_t *);
+extern void disable_putc(void);
+extern void enable_putc(void);
+extern int hwflow_onoff(int);
+extern int do_mdm_init; /* defined in common/main.c */
+#endif /* CONFIG_MODEM_SUPPORT */
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+ /* memory and cpu-speed are setup before relocation */
+ /* change the clock to be 50 MHz 1:1:1 */
+ clk_power->MPLLCON = 0x5c042;
+ clk_power->CLKDIVN = 0;
+ /* set up the I/O ports */
+ gpio->PACON = 0x3ffff;
+ gpio->PBCON = 0xaaaaaaaa;
+ gpio->PBUP = 0xffff;
+ gpio->PECON = 0x0;
+ gpio->PEUP = 0x0;
+#ifdef CONFIG_HWFLOW
+ /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
+ /* 10, 10, 00, 00, 10, 00, 10 */
+ gpio->PFCON=0xa22;
+ /* Disable pull-up on Rx, Tx, CTS and RTS pins */
+ gpio->PFUP=0x35;
+#else
+ /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
+ /* 00, 00, 00, 00, 10, 00, 10 */
+ gpio->PFCON = 0x22;
+ /* Disable pull-up on Rx and Tx pins */
+ gpio->PFUP = 0x5;
+#endif /* CONFIG_HWFLOW */
+ gpio->PGCON = 0x0;
+ gpio->PGUP = 0x0;
+ gpio->OPENCR = 0x0;
+
+ /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
+ gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x0C000100;
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (key_pressed()) {
+ disable_putc(); /* modem doesn't understand banner etc */
+ do_mdm_init = 1;
+ }
+#endif /* CONFIG_MODEM_SUPPORT */
+
+ return 0;
+}
+
+int dram_init (void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int key_pressed(void)
+{
+ int rc;
+ if (1) { /* check for button push here, now just return 1 */
+ rc = 1;
+ }
+
+ return rc;
+}
+#endif /* CONFIG_MODEM_SUPPORT */
diff --git a/board/samsung/smdk2400/u-boot.lds b/board/samsung/smdk2400/u-boot.lds
new file mode 100644
index 0000000..987b07d
--- /dev/null
+++ b/board/samsung/smdk2400/u-boot.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm920t/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
+ _end = .;
+}
generated by cgit v1.1 at 2024-11-30 05:06:13 +0000