summaryrefslogtreecommitdiff
path: root/board/samsung/smdk2400/smdk2400.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/samsung/smdk2400/smdk2400.c')
-rw-r--r--board/samsung/smdk2400/smdk2400.c125
1 files changed, 0 insertions, 125 deletions
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
deleted file mode 100644
index 895bd77..0000000
--- a/board/samsung/smdk2400/smdk2400.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void);
-int mdm_init (bd_t *);
-extern void disable_putc(void);
-extern void enable_putc(void);
-extern int hwflow_onoff(int);
-extern int do_mdm_init; /* defined in common/main.c */
-#endif /* CONFIG_MODEM_SUPPORT */
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* memory and cpu-speed are setup before relocation */
- /* change the clock to be 50 MHz 1:1:1 */
- clk_power->mpllcon = 0x5c042;
- clk_power->clkdivn = 0;
- /* set up the I/O ports */
- gpio->pacon = 0x3ffff;
- gpio->pbcon = 0xaaaaaaaa;
- gpio->pbup = 0xffff;
- gpio->pecon = 0x0;
- gpio->peup = 0x0;
-#ifdef CONFIG_HWFLOW
- /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 10, 10, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0xa22;
- /* Disable pull-up on Rx, Tx, CTS and RTS pins */
- gpio->pfup = 0x35;
-#else
- /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 00, 00, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0x22;
- /* Disable pull-up on Rx and Tx pins */
- gpio->pfup = 0x5;
-#endif /* CONFIG_HWFLOW */
- gpio->pgcon = 0x0;
- gpio->pgup = 0x0;
- gpio->opencr = 0x0;
-
- /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x0C000100;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (key_pressed()) {
- disable_putc(); /* modem doesn't understand banner etc */
- do_mdm_init = 1;
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void)
-{
- int rc;
- if (1) { /* check for button push here, now just return 1 */
- rc = 1;
- }
-
- return rc;
-}
-#endif /* CONFIG_MODEM_SUPPORT */
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif