summaryrefslogtreecommitdiff
path: root/board/sacsng
diff options
context:
space:
mode:
Diffstat (limited to 'board/sacsng')
-rw-r--r--board/sacsng/Kconfig9
-rw-r--r--board/sacsng/MAINTAINERS6
-rw-r--r--board/sacsng/Makefile8
-rw-r--r--board/sacsng/clkinit.c1009
-rw-r--r--board/sacsng/clkinit.h103
-rw-r--r--board/sacsng/flash.c507
-rw-r--r--board/sacsng/ioconfig.h217
-rw-r--r--board/sacsng/sacsng.c848
8 files changed, 0 insertions, 2707 deletions
diff --git a/board/sacsng/Kconfig b/board/sacsng/Kconfig
deleted file mode 100644
index 1646425..0000000
--- a/board/sacsng/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_SACSNG
-
-config SYS_BOARD
- default "sacsng"
-
-config SYS_CONFIG_NAME
- default "sacsng"
-
-endif
diff --git a/board/sacsng/MAINTAINERS b/board/sacsng/MAINTAINERS
deleted file mode 100644
index b76e462..0000000
--- a/board/sacsng/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SACSNG BOARD
-#M: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
-S: Orphan (since 2014-06)
-F: board/sacsng/
-F: include/configs/sacsng.h
-F: configs/sacsng_defconfig
diff --git a/board/sacsng/Makefile b/board/sacsng/Makefile
deleted file mode 100644
index 95e6b8d..0000000
--- a/board/sacsng/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := sacsng.o flash.o clkinit.o
diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c
deleted file mode 100644
index 2a28037..0000000
--- a/board/sacsng/clkinit.c
+++ /dev/null
@@ -1,1009 +0,0 @@
-/*
- * (C) Copyright 2002
- * Custom IDEAS, Inc. <www.cideas.com>
- * Jon Diekema <diekema@cideas.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#include <configs/sacsng.h>
-
-#include "clkinit.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int Daq64xSampling = 0;
-
-
-void Daq_BRG_Reset(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
-
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
- *brg_ptr |= CPM_BRG_RST;
- *brg_ptr &= ~CPM_BRG_RST;
-}
-
-void Daq_BRG_Disable(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
-
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
- *brg_ptr &= ~CPM_BRG_EN;
-}
-
-void Daq_BRG_Enable(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
- *brg_ptr |= CPM_BRG_EN;
-}
-
-uint Daq_BRG_Get_Div16(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- if (*brg_ptr & CPM_BRG_DIV16) {
- /* DIV16 active */
- return true;
- }
- else {
- /* DIV16 inactive */
- return false;
- }
-}
-
-void Daq_BRG_Set_Div16(uint brg, uint div16)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- if (div16) {
- /* DIV16 active */
- *brg_ptr |= CPM_BRG_DIV16;
- }
- else {
- /* DIV16 inactive */
- *brg_ptr &= ~CPM_BRG_DIV16;
- }
-}
-
-uint Daq_BRG_Get_Count(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
- uint brg_cnt;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- /* Get the clock divider
- *
- * Note: A clock divider of 0 means divide by 1,
- * therefore we need to add 1 to the count.
- */
- brg_cnt = (*brg_ptr & CPM_BRG_CD_MASK) >> CPM_BRG_DIV16_SHIFT;
- brg_cnt++;
- if (*brg_ptr & CPM_BRG_DIV16) {
- brg_cnt *= 16;
- }
-
- return (brg_cnt);
-}
-
-void Daq_BRG_Set_Count(uint brg, uint brg_cnt)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- /*
- * Note: A clock divider of 0 means divide by 1,
- * therefore we need to subtract 1 from the count.
- */
- if (brg_cnt > 4096) {
- /* Prescale = Divide by 16 */
- *brg_ptr = (*brg_ptr & ~CPM_BRG_CD_MASK) |
- (((brg_cnt / 16) - 1) << CPM_BRG_DIV16_SHIFT);
- *brg_ptr |= CPM_BRG_DIV16;
- }
- else {
- /* Prescale = Divide by 1 */
- *brg_ptr = (*brg_ptr & ~CPM_BRG_CD_MASK) |
- ((brg_cnt - 1) << CPM_BRG_DIV16_SHIFT);
- *brg_ptr &= ~CPM_BRG_DIV16;
- }
-}
-
-uint Daq_BRG_Get_ExtClk(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- return ((*brg_ptr & CPM_BRG_EXTC_MASK) >> CPM_BRG_EXTC_SHIFT);
-}
-
-char* Daq_BRG_Get_ExtClk_Description(uint brg)
-{
- uint extc;
-
- extc = Daq_BRG_Get_ExtClk(brg);
-
- switch (brg + 1) {
- case 1:
- case 2:
- case 5:
- case 6: {
- switch (extc) {
- case 0: {
- return ("BRG_INT");
- }
- case 1: {
- return ("CLK3");
- }
- case 2: {
- return ("CLK5");
- }
- }
- return ("??1245??");
- }
- case 3:
- case 4:
- case 7:
- case 8: {
- switch (extc) {
- case 0: {
- return ("BRG_INT");
- }
- case 1: {
- return ("CLK9");
- }
- case 2: {
- return ("CLK15");
- }
- }
- return ("??3478??");
- }
- }
- return ("??9876??");
-}
-
-void Daq_BRG_Set_ExtClk(uint brg, uint extc)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- brg_ptr += brg;
-
- *brg_ptr = (*brg_ptr & ~CPM_BRG_EXTC_MASK) |
- ((extc << CPM_BRG_EXTC_SHIFT) & CPM_BRG_EXTC_MASK);
-}
-
-uint Daq_BRG_Rate(uint brg)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint *brg_ptr;
- uint brg_cnt;
- uint brg_freq = 0;
-
- brg_ptr = (uint *)&immr->im_brgc1;
- brg_ptr += brg;
- if (brg >= 5) {
- brg_ptr = (uint *)&immr->im_brgc5;
- brg_ptr += (brg - 4);
- }
-
- brg_cnt = Daq_BRG_Get_Count(brg);
-
- switch (Daq_BRG_Get_ExtClk(brg)) {
- case CPM_BRG_EXTC_CLK3:
- case CPM_BRG_EXTC_CLK5: {
- brg_freq = brg_cnt;
- break;
- }
- default: {
- brg_freq = (uint)BRG_INT_CLK / brg_cnt;
- }
- }
- return (brg_freq);
-}
-
-uint Daq_Get_SampleRate(void)
-{
- /*
- * Read the BRG's to return the actual sample rate.
- */
- return (Daq_BRG_Rate(MCLK_BRG) / (MCLK_DIVISOR * SCLK_DIVISOR));
-}
-
-void Daq_Init_Clocks(int sample_rate, int sample_64x)
-{
- volatile ioport_t *iopa = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0 /* port A */);
- uint mclk_divisor; /* MCLK divisor */
- int flag; /* Interrupt state */
-
- /* Save off the clocking data */
- Daq64xSampling = sample_64x;
-
- /*
- * Limit the sample rate to some sensible values.
- */
- if (sample_rate > MAX_64x_SAMPLE_RATE) {
- sample_rate = MAX_64x_SAMPLE_RATE;
- }
- if (sample_rate < MIN_SAMPLE_RATE) {
- sample_rate = MIN_SAMPLE_RATE;
- }
-
- /*
- * Initialize the MCLK/SCLK/LRCLK baud rate generators.
- */
-
- /* Setup MCLK */
- Daq_BRG_Set_ExtClk(MCLK_BRG, CPM_BRG_EXTC_BRGCLK);
-
- /* Setup SCLK */
-# ifdef RUN_SCLK_ON_BRG_INT
- Daq_BRG_Set_ExtClk(SCLK_BRG, CPM_BRG_EXTC_BRGCLK);
-# else
- Daq_BRG_Set_ExtClk(SCLK_BRG, CPM_BRG_EXTC_CLK9);
-# endif
-
- /* Setup LRCLK */
-# ifdef RUN_LRCLK_ON_BRG_INT
- Daq_BRG_Set_ExtClk(LRCLK_BRG, CPM_BRG_EXTC_BRGCLK);
-# else
- Daq_BRG_Set_ExtClk(LRCLK_BRG, CPM_BRG_EXTC_CLK5);
-# endif
-
- /*
- * Dynamically adjust MCLK based on the new sample rate.
- */
-
- /* Compute the divisors */
- mclk_divisor = BRG_INT_CLK / (sample_rate * MCLK_DIVISOR * SCLK_DIVISOR);
-
- /*
- * Disable interrupt and save the current state
- */
- flag = disable_interrupts();
-
- /* Setup MCLK */
- Daq_BRG_Set_Count(MCLK_BRG, mclk_divisor);
-
- /* Setup SCLK */
-# ifdef RUN_SCLK_ON_BRG_INT
- Daq_BRG_Set_Count(SCLK_BRG, mclk_divisor * MCLK_DIVISOR);
-# else
- Daq_BRG_Set_Count(SCLK_BRG, MCLK_DIVISOR);
-# endif
-
-# ifdef RUN_LRCLK_ON_BRG_INT
- Daq_BRG_Set_Count(LRCLK_BRG,
- mclk_divisor * MCLK_DIVISOR * SCLK_DIVISOR);
-# else
- Daq_BRG_Set_Count(LRCLK_BRG, SCLK_DIVISOR);
-# endif
-
- /*
- * Restore the Interrupt state
- */
- if (flag) {
- enable_interrupts();
- }
-
- /* Enable the clock drivers */
- iopa->pdat &= ~SLRCLK_EN_MASK;
-}
-
-void Daq_Stop_Clocks(void)
-
-{
-#ifdef TIGHTEN_UP_BRG_TIMING
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- register uint mclk_brg; /* MCLK BRG value */
- register uint sclk_brg; /* SCLK BRG value */
- register uint lrclk_brg; /* LRCLK BRG value */
- unsigned long flag; /* Interrupt flags */
-#endif
-
-# ifdef TIGHTEN_UP_BRG_TIMING
- /*
- * Obtain MCLK BRG reset/disabled value
- */
-# if (MCLK_BRG == 0)
- mclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 1)
- mclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 2)
- mclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 3)
- mclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 4)
- mclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 5)
- mclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 6)
- mclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 7)
- mclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-
- /*
- * Obtain SCLK BRG reset/disabled value
- */
-# if (SCLK_BRG == 0)
- sclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 1)
- sclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 2)
- sclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 3)
- sclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 4)
- sclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 5)
- sclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 6)
- sclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 7)
- sclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-
- /*
- * Obtain LRCLK BRG reset/disabled value
- */
-# if (LRCLK_BRG == 0)
- lrclk_brg = (*IM_BRGC1 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 1)
- lrclk_brg = (*IM_BRGC2 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 2)
- lrclk_brg = (*IM_BRGC3 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 3)
- lrclk_brg = (*IM_BRGC4 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 4)
- lrclk_brg = (*IM_BRGC5 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 5)
- lrclk_brg = (*IM_BRGC6 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 6)
- lrclk_brg = (*IM_BRGC7 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 7)
- lrclk_brg = (*IM_BRGC8 | CPM_BRG_RST) & ~CPM_BRG_EN;
-# endif
-
- /*
- * Disable interrupt and save the current state
- */
- flag = disable_interrupts();
-
- /*
- * Set reset on MCLK BRG
- */
-# if (MCLK_BRG == 0)
- *IM_BRGC1 = mclk_brg;
-# endif
-# if (MCLK_BRG == 1)
- *IM_BRGC2 = mclk_brg;
-# endif
-# if (MCLK_BRG == 2)
- *IM_BRGC3 = mclk_brg;
-# endif
-# if (MCLK_BRG == 3)
- *IM_BRGC4 = mclk_brg;
-# endif
-# if (MCLK_BRG == 4)
- *IM_BRGC5 = mclk_brg;
-# endif
-# if (MCLK_BRG == 5)
- *IM_BRGC6 = mclk_brg;
-# endif
-# if (MCLK_BRG == 6)
- *IM_BRGC7 = mclk_brg;
-# endif
-# if (MCLK_BRG == 7)
- *IM_BRGC8 = mclk_brg;
-# endif
-
- /*
- * Set reset on SCLK BRG
- */
-# if (SCLK_BRG == 0)
- *IM_BRGC1 = sclk_brg;
-# endif
-# if (SCLK_BRG == 1)
- *IM_BRGC2 = sclk_brg;
-# endif
-# if (SCLK_BRG == 2)
- *IM_BRGC3 = sclk_brg;
-# endif
-# if (SCLK_BRG == 3)
- *IM_BRGC4 = sclk_brg;
-# endif
-# if (SCLK_BRG == 4)
- *IM_BRGC5 = sclk_brg;
-# endif
-# if (SCLK_BRG == 5)
- *IM_BRGC6 = sclk_brg;
-# endif
-# if (SCLK_BRG == 6)
- *IM_BRGC7 = sclk_brg;
-# endif
-# if (SCLK_BRG == 7)
- *IM_BRGC8 = sclk_brg;
-# endif
-
- /*
- * Set reset on LRCLK BRG
- */
-# if (LRCLK_BRG == 0)
- *IM_BRGC1 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 1)
- *IM_BRGC2 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 2)
- *IM_BRGC3 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 3)
- *IM_BRGC4 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 4)
- *IM_BRGC5 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 5)
- *IM_BRGC6 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 6)
- *IM_BRGC7 = lrclk_brg;
-# endif
-# if (LRCLK_BRG == 7)
- *IM_BRGC8 = lrclk_brg;
-# endif
-
- /*
- * Clear reset on MCLK BRG
- */
-# if (MCLK_BRG == 0)
- *IM_BRGC1 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 1)
- *IM_BRGC2 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 2)
- *IM_BRGC3 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 3)
- *IM_BRGC4 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 4)
- *IM_BRGC5 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 5)
- *IM_BRGC6 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 6)
- *IM_BRGC7 = mclk_brg & ~CPM_BRG_RST;
-# endif
-# if (MCLK_BRG == 7)
- *IM_BRGC8 = mclk_brg & ~CPM_BRG_RST;
-# endif
-
- /*
- * Clear reset on SCLK BRG
- */
-# if (SCLK_BRG == 0)
- *IM_BRGC1 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 1)
- *IM_BRGC2 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 2)
- *IM_BRGC3 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 3)
- *IM_BRGC4 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 4)
- *IM_BRGC5 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 5)
- *IM_BRGC6 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 6)
- *IM_BRGC7 = sclk_brg & ~CPM_BRG_RST;
-# endif
-# if (SCLK_BRG == 7)
- *IM_BRGC8 = sclk_brg & ~CPM_BRG_RST;
-# endif
-
- /*
- * Clear reset on LRCLK BRG
- */
-# if (LRCLK_BRG == 0)
- *IM_BRGC1 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 1)
- *IM_BRGC2 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 2)
- *IM_BRGC3 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 3)
- *IM_BRGC4 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 4)
- *IM_BRGC5 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 5)
- *IM_BRGC6 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 6)
- *IM_BRGC7 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-# if (LRCLK_BRG == 7)
- *IM_BRGC8 = lrclk_brg & ~CPM_BRG_RST;
-# endif
-
- /*
- * Restore the Interrupt state
- */
- if (flag) {
- enable_interrupts();
- }
-# else
- /*
- * Reset the clocks
- */
- Daq_BRG_Reset(MCLK_BRG);
- Daq_BRG_Reset(SCLK_BRG);
- Daq_BRG_Reset(LRCLK_BRG);
-# endif
-}
-
-void Daq_Start_Clocks(int sample_rate)
-
-{
-#ifdef TIGHTEN_UP_BRG_TIMING
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- register uint mclk_brg; /* MCLK BRG value */
- register uint sclk_brg; /* SCLK BRG value */
- register uint temp_lrclk_brg; /* Temporary LRCLK BRG value */
- register uint real_lrclk_brg; /* Permanent LRCLK BRG value */
- uint lrclk_brg; /* LRCLK BRG value */
- unsigned long flags; /* Interrupt flags */
- uint sclk_cnt; /* SCLK count */
- uint delay_cnt; /* Delay count */
-#endif
-
-# ifdef TIGHTEN_UP_BRG_TIMING
- /*
- * Obtain the enabled MCLK BRG value
- */
-# if (MCLK_BRG == 0)
- mclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 1)
- mclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 2)
- mclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 3)
- mclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 4)
- mclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 5)
- mclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 6)
- mclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (MCLK_BRG == 7)
- mclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-
- /*
- * Obtain the enabled SCLK BRG value
- */
-# if (SCLK_BRG == 0)
- sclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 1)
- sclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 2)
- sclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 3)
- sclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 4)
- sclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 5)
- sclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 6)
- sclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (SCLK_BRG == 7)
- sclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-
- /*
- * Obtain the enabled LRCLK BRG value
- */
-# if (LRCLK_BRG == 0)
- lrclk_brg = (*IM_BRGC1 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 1)
- lrclk_brg = (*IM_BRGC2 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 2)
- lrclk_brg = (*IM_BRGC3 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 3)
- lrclk_brg = (*IM_BRGC4 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 4)
- lrclk_brg = (*IM_BRGC5 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 5)
- lrclk_brg = (*IM_BRGC6 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 6)
- lrclk_brg = (*IM_BRGC7 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-# if (LRCLK_BRG == 7)
- lrclk_brg = (*IM_BRGC8 & ~CPM_BRG_RST) | CPM_BRG_EN;
-# endif
-
- /* Save off the real LRCLK value */
- real_lrclk_brg = lrclk_brg;
-
- /* Obtain the current SCLK count */
- sclk_cnt = ((sclk_brg & 0x00001FFE) >> 1) + 1;
-
- /* Compute the delay as a function of SCLK count */
- delay_cnt = ((sclk_cnt / 4) - 2) * 10 + 6;
- if (DaqSampleRate == 43402) {
- delay_cnt++;
- }
-
- /* Clear out the count */
- temp_lrclk_brg = sclk_brg & ~0x00001FFE;
-
- /* Insert the count */
- temp_lrclk_brg |= ((delay_cnt + (sclk_cnt / 2) - 1) << 1) & 0x00001FFE;
-
- /*
- * Disable interrupt and save the current state
- */
- flag = disable_interrupts();
-
- /*
- * Enable MCLK BRG
- */
-# if (MCLK_BRG == 0)
- *IM_BRGC1 = mclk_brg;
-# endif
-# if (MCLK_BRG == 1)
- *IM_BRGC2 = mclk_brg;
-# endif
-# if (MCLK_BRG == 2)
- *IM_BRGC3 = mclk_brg;
-# endif
-# if (MCLK_BRG == 3)
- *IM_BRGC4 = mclk_brg;
-# endif
-# if (MCLK_BRG == 4)
- *IM_BRGC5 = mclk_brg;
-# endif
-# if (MCLK_BRG == 5)
- *IM_BRGC6 = mclk_brg;
-# endif
-# if (MCLK_BRG == 6)
- *IM_BRGC7 = mclk_brg;
-# endif
-# if (MCLK_BRG == 7)
- *IM_BRGC8 = mclk_brg;
-# endif
-
- /*
- * Enable SCLK BRG
- */
-# if (SCLK_BRG == 0)
- *IM_BRGC1 = sclk_brg;
-# endif
-# if (SCLK_BRG == 1)
- *IM_BRGC2 = sclk_brg;
-# endif
-# if (SCLK_BRG == 2)
- *IM_BRGC3 = sclk_brg;
-# endif
-# if (SCLK_BRG == 3)
- *IM_BRGC4 = sclk_brg;
-# endif
-# if (SCLK_BRG == 4)
- *IM_BRGC5 = sclk_brg;
-# endif
-# if (SCLK_BRG == 5)
- *IM_BRGC6 = sclk_brg;
-# endif
-# if (SCLK_BRG == 6)
- *IM_BRGC7 = sclk_brg;
-# endif
-# if (SCLK_BRG == 7)
- *IM_BRGC8 = sclk_brg;
-# endif
-
- /*
- * Enable LRCLK BRG (1st time - temporary)
- */
-# if (LRCLK_BRG == 0)
- *IM_BRGC1 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 1)
- *IM_BRGC2 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 2)
- *IM_BRGC3 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 3)
- *IM_BRGC4 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 4)
- *IM_BRGC5 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 5)
- *IM_BRGC6 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 6)
- *IM_BRGC7 = temp_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 7)
- *IM_BRGC8 = temp_lrclk_brg;
-# endif
-
- /*
- * Enable LRCLK BRG (2nd time - permanent)
- */
-# if (LRCLK_BRG == 0)
- *IM_BRGC1 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 1)
- *IM_BRGC2 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 2)
- *IM_BRGC3 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 3)
- *IM_BRGC4 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 4)
- *IM_BRGC5 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 5)
- *IM_BRGC6 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 6)
- *IM_BRGC7 = real_lrclk_brg;
-# endif
-# if (LRCLK_BRG == 7)
- *IM_BRGC8 = real_lrclk_brg;
-# endif
-
- /*
- * Restore the Interrupt state
- */
- if (flag) {
- enable_interrupts();
- }
-# else
- /*
- * Enable the clocks
- */
- Daq_BRG_Enable(LRCLK_BRG);
- Daq_BRG_Enable(SCLK_BRG);
- Daq_BRG_Enable(MCLK_BRG);
-# endif
-}
-
-void Daq_Display_Clocks(void)
-
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint mclk_divisor; /* Detected MCLK divisor */
- uint sclk_divisor; /* Detected SCLK divisor */
-
- printf("\nBRG:\n");
- if (immr->im_brgc4 != 0) {
- printf("\tbrgc4\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, MCLK\n",
- immr->im_brgc4,
- (uint)&(immr->im_brgc4),
- Daq_BRG_Get_Count(3),
- Daq_BRG_Get_ExtClk(3),
- Daq_BRG_Get_ExtClk_Description(3));
- }
- if (immr->im_brgc8 != 0) {
- printf("\tbrgc8\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, SCLK\n",
- immr->im_brgc8,
- (uint)&(immr->im_brgc8),
- Daq_BRG_Get_Count(7),
- Daq_BRG_Get_ExtClk(7),
- Daq_BRG_Get_ExtClk_Description(7));
- }
- if (immr->im_brgc6 != 0) {
- printf("\tbrgc6\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, LRCLK\n",
- immr->im_brgc6,
- (uint)&(immr->im_brgc6),
- Daq_BRG_Get_Count(5),
- Daq_BRG_Get_ExtClk(5),
- Daq_BRG_Get_ExtClk_Description(5));
- }
- if (immr->im_brgc1 != 0) {
- printf("\tbrgc1\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, SMC1\n",
- immr->im_brgc1,
- (uint)&(immr->im_brgc1),
- Daq_BRG_Get_Count(0),
- Daq_BRG_Get_ExtClk(0),
- Daq_BRG_Get_ExtClk_Description(0));
- }
- if (immr->im_brgc2 != 0) {
- printf("\tbrgc2\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, SMC2\n",
- immr->im_brgc2,
- (uint)&(immr->im_brgc2),
- Daq_BRG_Get_Count(1),
- Daq_BRG_Get_ExtClk(1),
- Daq_BRG_Get_ExtClk_Description(1));
- }
- if (immr->im_brgc3 != 0) {
- printf("\tbrgc3\t0x%08x @ 0x%08x, %5d count, %d extc, %8s, SCC1\n",
- immr->im_brgc3,
- (uint)&(immr->im_brgc3),
- Daq_BRG_Get_Count(2),
- Daq_BRG_Get_ExtClk(2),
- Daq_BRG_Get_ExtClk_Description(2));
- }
- if (immr->im_brgc5 != 0) {
- printf("\tbrgc5\t0x%08x @ 0x%08x, %5d count, %d extc, %8s\n",
- immr->im_brgc5,
- (uint)&(immr->im_brgc5),
- Daq_BRG_Get_Count(4),
- Daq_BRG_Get_ExtClk(4),
- Daq_BRG_Get_ExtClk_Description(4));
- }
- if (immr->im_brgc7 != 0) {
- printf("\tbrgc7\t0x%08x @ 0x%08x, %5d count, %d extc, %8s\n",
- immr->im_brgc7,
- (uint)&(immr->im_brgc7),
- Daq_BRG_Get_Count(6),
- Daq_BRG_Get_ExtClk(6),
- Daq_BRG_Get_ExtClk_Description(6));
- }
-
-# ifdef RUN_SCLK_ON_BRG_INT
- mclk_divisor = Daq_BRG_Rate(MCLK_BRG) / Daq_BRG_Rate(SCLK_BRG);
-# else
- mclk_divisor = Daq_BRG_Get_Count(SCLK_BRG);
-# endif
-# ifdef RUN_LRCLK_ON_BRG_INT
- sclk_divisor = Daq_BRG_Rate(SCLK_BRG) / Daq_BRG_Rate(LRCLK_BRG);
-# else
- sclk_divisor = Daq_BRG_Get_Count(LRCLK_BRG);
-# endif
-
- printf("\nADC/DAC Clocking (%d/%d):\n", sclk_divisor, mclk_divisor);
- printf("\tMCLK %8d Hz, or %3dx SCLK, or %3dx LRCLK\n",
- Daq_BRG_Rate(MCLK_BRG),
- mclk_divisor,
- mclk_divisor * sclk_divisor);
-# ifdef RUN_SCLK_ON_BRG_INT
- printf("\tSCLK %8d Hz, or %3dx LRCLK\n",
- Daq_BRG_Rate(SCLK_BRG),
- sclk_divisor);
-# else
- printf("\tSCLK %8d Hz, or %3dx LRCLK\n",
- Daq_BRG_Rate(MCLK_BRG) / mclk_divisor,
- sclk_divisor);
-# endif
-# ifdef RUN_LRCLK_ON_BRG_INT
- printf("\tLRCLK %8d Hz\n",
- Daq_BRG_Rate(LRCLK_BRG));
-# else
-# ifdef RUN_SCLK_ON_BRG_INT
- printf("\tLRCLK %8d Hz\n",
- Daq_BRG_Rate(SCLK_BRG) / sclk_divisor);
-# else
- printf("\tLRCLK %8d Hz\n",
- Daq_BRG_Rate(MCLK_BRG) / (mclk_divisor * sclk_divisor));
-# endif
-# endif
- printf("\n");
-}
diff --git a/board/sacsng/clkinit.h b/board/sacsng/clkinit.h
deleted file mode 100644
index 3f759dd..0000000
--- a/board/sacsng/clkinit.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2002
- * Custom IDEAS, Inc. <www.cideas.com>
- * Jon Diekema <diekema@cideas.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SLRCLK_EN_MASK 0x00040000 /* PA13 - SLRCLK_EN* */
-
-#define MIN_SAMPLE_RATE 4000 /* Minimum sample rate */
-#define MAX_128x_SAMPLE_RATE 43402 /* Maximum 128x sample rate */
-#define MAX_64x_SAMPLE_RATE 86805 /* Maximum 64x sample rate */
-
-#define KHZ ((uint)1000)
-#define MHZ ((uint)(1000 * KHZ))
-
-#define MCLK_BRG 3 /* MCLK, Master CLocK for the A/D & D/A */
-#define SCLK_BRG 7 /* SCLK, Sample CLocK for the A/D & D/A */
-#define LRCLK_BRG 5 /* LRCLK, L/R CLocK for the A/D & D/A */
- /* 0 == BRG1 (used for SMC1) */
- /* 1 == BRG2 (used for SMC2) */
- /* 2 == BRG3 (used for SCC1) */
- /* 3 == BRG4 (MCLK) */
- /* 4 == BRG5 */
- /* 5 == BRG6 (LRCLK) */
- /* 6 == BRG7 */
- /* 7 == BRG8 (SCLK) */
-
-#define MCLK_DIVISOR 4 /* SCLK = MCLK / MCLK_DIVISOR */
-#define SCLK_DIVISOR (Daq64xSampling ? 64 : 128)
- /* LRCLK = SCLK / SCLK_DIVISOR */
-
-#define TIGHTEN_UP_BRG_EN_TIMING /* Tighten up the BRG enable timing */
-#define RUN_SCLK_ON_BRG_INT /* Run SCLK on BRG_INT instead of MCLK */
- /* The 8260 (Mask B.3) seems to have */
- /* problems generating SCLK from MCLK */
- /* via CLK9. */
-#define RUN_LRCLK_ON_BRG_INT /* Run LRCLK on BRG_INT instead of SCLK */
- /* The 8260 (Mask B.3) seems to have */
- /* problems generating LRCLK from SCLK */
-
-#define NUM_LRCLKS_TO_STABILIZE 1 /* Number of LRCLK period (sample) */
- /* to wait for the clock to stabilize */
-
-#define CPM_CLK (gd->bd->bi_cpmfreq)
-#define DFBRG 4
-#define BRG_INT_CLK (CPM_CLK * 2 / DFBRG)
- /* BRG = CPM * 2 / DFBRG (Sect 9.8) */
- /* BRG = CPM * 2 / 4 */
- /* BRG = CPM / 2 */
-
-#define CPM_BRG_EXTC_MASK ((uint)0x0000C000)
-#define CPM_BRG_EXTC_SHIFT 14
-
-#define CPM_BRG_DIV16_MASK ((uint)0x00000001)
-#define CPM_BRG_DIV16_SHIFT 1
-
-#define CPM_BRG_EXTC_BRGCLK 0
-#define CPM_BRG_EXTC_CLK3 1
-#define CPM_BRG_EXTC_CLK9 CPM_BRG_EXTC_CLK3
-#define CPM_BRG_EXTC_CLK5 2
-#define CPM_BRG_EXTC_CLK15 CPM_BRG_EXTC_CLK5
-
-#define IM_BRGC1 ((uint *)0xf00119f0)
-#define IM_BRGC2 ((uint *)0xf00119f4)
-#define IM_BRGC3 ((uint *)0xf00119f8)
-#define IM_BRGC4 ((uint *)0xf00119fc)
-#define IM_BRGC5 ((uint *)0xf00115f0)
-#define IM_BRGC6 ((uint *)0xf00115f4)
-#define IM_BRGC7 ((uint *)0xf00115f8)
-#define IM_BRGC8 ((uint *)0xf00115fc)
-
-/*
- * External declarations
- */
-
-extern int Daq64xSampling;
-
-extern void Daq_BRG_Reset(uint brg);
-extern void Daq_BRG_Run(uint brg);
-
-extern void Daq_BRG_Disable(uint brg);
-extern void Daq_BRG_Enable(uint brg);
-
-extern uint Daq_BRG_Get_Div16(uint brg);
-extern void Daq_BRG_Set_Div16(uint brg, uint div16);
-
-extern uint Daq_BRG_Get_Count(uint brg);
-extern void Daq_BRG_Set_Count(uint brg, uint brg_cnt);
-
-extern uint Daq_BRG_Get_ExtClk(uint brg);
-extern char* Daq_BRG_Get_ExtClk_Description(uint brg);
-extern void Daq_BRG_Set_ExtClk(uint brg, uint extc);
-
-extern uint Daq_BRG_Rate(uint brg);
-
-extern uint Daq_Get_SampleRate(void);
-
-extern void Daq_Init_Clocks(int sample_rate, int sample_64x);
-extern void Daq_Stop_Clocks(void);
-extern void Daq_Start_Clocks(int sample_rate);
-extern void Daq_Display_Clocks(void);
diff --git a/board/sacsng/flash.c b/board/sacsng/flash.c
deleted file mode 100644
index 686fb22..0000000
--- a/board/sacsng/flash.c
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <configs/sacsng.h>
-
-
-#undef DEBUG
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-#ifndef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#endif
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_short *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- size_b0 = flash_get_size((vu_short *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- size_b1 = flash_get_size((vu_short *)CONFIG_SYS_FLASH1_BASE, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
-
- /*
- * We only report the primary flash for U-Boot's use.
- */
- return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_short *addr, flash_info_t *info)
-{
- short i;
- ushort value;
- ulong base = (ulong)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x0555] = 0xAAAA;
- addr[0x02AA] = 0x5555;
- addr[0x0555] = 0x9090;
- __asm__ __volatile__(" sync\n ");
-
- value = addr[0];
-#ifdef DEBUG
- printf("Flash manufacturer 0x%04X\n", value);
-#endif
-
- if(value == (ushort)AMD_MANUFACT) {
- info->flash_id = FLASH_MAN_AMD;
- } else if (value == (ushort)FUJ_MANUFACT) {
- info->flash_id = FLASH_MAN_FUJ;
- } else {
-#ifdef DEBUG
- printf("Unknown flash manufacturer 0x%04X\n", value);
-#endif
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = addr[1]; /* device ID */
-#ifdef DEBUG
- printf("Flash type 0x%04X\n", value);
-#endif
-
- if(value == (ushort)AMD_ID_LV400T) {
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000; /* => 0.5 MB */
- } else if(value == (ushort)AMD_ID_LV400B) {
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000; /* => 0.5 MB */
- } else if(value == (ushort)AMD_ID_LV800T) {
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000; /* => 1 MB */
- } else if(value == (ushort)AMD_ID_LV800B) {
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000; /* => 1 MB */
- } else if(value == (ushort)AMD_ID_LV160T) {
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000; /* => 2 MB */
- } else if(value == (ushort)AMD_ID_LV160B) {
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000; /* => 2 MB */
- } else if(value == (ushort)AMD_ID_LV320T) {
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000; /* => 4 MB */
- } else if(value == (ushort)AMD_ID_LV320B) {
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000; /* => 4 MB */
- } else {
-#ifdef DEBUG
- printf("Unknown flash type 0x%04X\n", value);
- info->size = CONFIG_SYS_FLASH_SIZE;
-#else
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-#endif
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 3) * 0x00010000);
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + (i * 0x00010000);
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (volatile unsigned short *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (volatile unsigned short *)info->start[0];
-
- }
-
- addr[0] = 0xF0F0; /* reset bank */
- __asm__ __volatile__(" sync\n ");
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_short *addr = (vu_short*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0555] = 0xAAAA;
- addr[0x02AA] = 0x5555;
- addr[0x0555] = 0x8080;
- addr[0x0555] = 0xAAAA;
- addr[0x02AA] = 0x5555;
- __asm__ __volatile__(" sync\n ");
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_short*)(info->start[sect]);
- addr[0] = 0x3030;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_short*)(info->start[l_sect]);
- while ((addr[0] & 0x0080) != 0x0080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- addr[0] = 0xF0F0; /* reset bank */
- __asm__ __volatile__(" sync\n ");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (vu_short*)info->start[0];
- addr[0] = 0xF0F0; /* reset bank */
- __asm__ __volatile__(" sync\n ");
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- vu_short *addr = (vu_short*)(info->start[0]);
- ulong start;
- int flag;
- int j;
-
- /* Check if Flash is (sufficiently) erased */
- if (((*(vu_long *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* The original routine was designed to write 32 bit words to
- * 32 bit wide memory. We have 16 bit wide memory so we do
- * two writes. We write the LSB first at dest+2 and then the
- * MSB at dest (lousy big endian).
- */
- dest += 2;
- for(j = 0; j < 2; j++) {
- addr[0x0555] = 0xAAAA;
- addr[0x02AA] = 0x5555;
- addr[0x0555] = 0xA0A0;
- __asm__ __volatile__(" sync\n ");
-
- *((vu_short *)dest) = (ushort)data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while (*(vu_short *)dest != (ushort)data) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- dest -= 2;
- data >>= 16;
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/sacsng/ioconfig.h b/board/sacsng/ioconfig.h
deleted file mode 100644
index ac8f152..0000000
--- a/board/sacsng/ioconfig.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * I/O Port configuration table
- *
- * If conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#ifdef SKIP
-#undef SKIP
-#endif
-
-#ifdef CONF
-#undef CONF
-#endif
-
-#ifdef DIN
-#undef DIN
-#endif
-
-#ifdef DOUT
-#undef DOUT
-#endif
-
-#ifdef GPIO
-#undef GPIO
-#endif
-
-#ifdef SPEC
-#undef SPEC
-#endif
-
-#ifdef ACTV
-#undef ACTV
-#endif
-
-#ifdef OPEN
-#undef OPEN
-#endif
-
-#define SKIP 0 /* SKIP over this port */
-#define CONF 1 /* CONFiguration the port */
-
-#define DIN 0 /* PDIRx 0: Direction IN */
-#define DOUT 1 /* PDIRx 1: Direction OUT */
-
-#define GPIO 0 /* PPARx 0: General Purpose I/O */
-#define SPEC 1 /* PPARx 1: dedicated to a peripheral function, */
- /* i.e. the port has a SPECial use. */
-
-#define ACTV 0 /* PODRx 0: ACTiVely driven as an output */
-#define OPEN 1 /* PODRx 1: OPEN-drain driver */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PA31 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS8* */
- /* PA30 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS7* */
- /* PA29 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS6* */
- /* PA28 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS5* */
- /* PA27 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS4* */
- /* PA26 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS3* */
- /* PA25 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS2* */
- /* PA24 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* RODIS1* */
- /* PA23 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* ODIS_EN* */
- /* PA22 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* STLED2_EN* */
- /* PA21 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* STLED1_EN* */
- /* PA20 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* PLED3_EN* */
- /* PA19 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* PLED2_EN* */
- /* PA18 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* PLED1_EN* */
- /* PA17 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PA16 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* DAC_RST* */
- /* PA15 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* CH34SDATA_PU */
- /* PA14 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* CH12SDATA_PU */
- /* PA13 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* SLRCLK_EN* */
- /* PA12 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_4ACDC* */
- /* PA11 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_4TEDS* */
- /* PA10 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_4XTDS* */
- /* PA9 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_3ACDC* */
- /* PA8 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_3TEDS* */
- /* PA7 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_3XTDS* */
- /* PA6 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_2ACDC* */
- /* PA5 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_2TEDS* */
- /* PA4 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_2XTDS* */
- /* PA3 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PA2 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_1ACDC* */
- /* PA1 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* MTRX_1TEDS* */
- /* PA0 */ { CONF, GPIO, 0, DOUT, ACTV, 1 } /* MTRX_1XTDS* */
- },
-
- /* Port B configuration */
- { /* conf ppar psor pdir podr pdat */
- /* PB31 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* FCC2 MII_TX_ER */
- /* PB30 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RX_DV */
- /* PB29 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* FCC2 MII_TX_EN */
- /* PB28 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RX_ER */
- /* PB27 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_COL */
- /* PB26 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_CRS */
- /* PB25 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* FCC2 MII_TXD3 */
- /* PB24 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* FCC2 MII_TXD2 */
- /* PB23 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* FCC2 MII_TXD1 */
- /* PB22 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* FCC2 MII_TXD0 */
- /* PB21 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RXD0 */
- /* PB20 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RXD1 */
- /* PB19 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RXD2 */
- /* PB18 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* FCC2 MII_RXD3 */
- /* PB17 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB16 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB15 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB14 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* L1RXDC1, BSDATA_ADC12 */
- /* PB13 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB12 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* L1RSYNCC1, LRCLK */
- /* PB11 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* L1TXDD1, RSDATA_DAC12 */
- /* PB10 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* L1RXDD1, BSDATA_ADC34 */
- /* PB9 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB8 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* L1RSYNCD1, LRCLK */
- /* PB7 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PB6 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* XCITE_SHDN */
- /* PB5 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* TRIGGER */
- /* PB4 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* ARM */
- /* PB3 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PB2 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PB1 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PB0 */ { SKIP, GPIO, 0, DIN, ACTV, 0 } /* pin doesn't exist */
- },
-
- /* Port C */
- { /* conf ppar psor pdir podr pdat */
- /* PC31 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC30 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC29 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK3, MCLK */
- /* PC28 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* TOUT2* */
-#ifdef QQQ
- /* PC28 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* TOUT2* */
-#endif
- /* PC27 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK5, SCLK */
- /* PC26 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC25 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK7, SCLK */
- /* PC24 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC23 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK9, MCLK */
- /* PC22 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC21 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* BRGO6 (LRCLK) */
- /* PC20 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC19 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK13, MII_RXCLK */
- /* PC18 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* CLK14, MII_TXCLK */
- /* PC17 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* BRGO8 (SCLK) */
- /* PC16 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC15 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* SMC2_TX */
- /* PC14 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC13 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC12 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* TDM_STRB3 */
- /* PC11 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC10 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* TDM_STRB4 */
- /* PC9 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* BPDIS_IN3 */
- /* PC8 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* BPDIS_IN2 */
- /* PC7 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* BPDIS_IN1 */
- /* PC6 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PC5 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* BTST_IN2* */
- /* PC4 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* BTST_IN1* */
- /* PC3 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* MUSH_STAT */
- /* PC2 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* OUTDRV_STAT */
- /* PC1 */ { CONF, GPIO, 0, DOUT, OPEN, 1 }, /* PHY_MDIO */
- /* PC0 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* PHY_MDC */
- },
-
- /* Port D */
- { /* conf ppar psor pdir podr pdat */
- /* PD31 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* SCC1_RX */
- /* PD30 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* SCC1_TX */
- /* PD29 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD28 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD27 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD26 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD25 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD24 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD23 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD22 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD21 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD20 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* SPI_ADC_CS* */
- /* PD19 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* SPI_DAC_CS* */
-#if defined(CONFIG_SOFT_SPI)
- /* PD18 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* SPI_CLK */
- /* PD17 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* SPI_MOSI */
- /* PD16 */ { CONF, GPIO, 0, DIN, ACTV, 0 }, /* SPI_MISO */
-#else
- /* PD18 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* SPI_CLK */
- /* PD17 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* SPI_MOSI */
- /* PD16 */ { CONF, SPEC, 1, DIN, ACTV, 0 }, /* SPI_MISO */
-#endif
-#if defined(CONFIG_SYS_I2C_SOFT)
- /* PD15 */ { CONF, GPIO, 0, DOUT, OPEN, 1 }, /* I2C_SDA */
- /* PD14 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* I2C_SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
- /* PD15 */ { CONF, SPEC, 1, DIN, OPEN, 0 }, /* I2C_SDA */
- /* PD14 */ { CONF, SPEC, 1, DIN, OPEN, 0 }, /* I2C_SCL */
-#else /* normal I/O port pins */
- /* PD15 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* I2C_SDA */
- /* PD14 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* I2C_SCL */
-#endif
-#endif
- /* PD13 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* TDM_STRB1 */
- /* PD12 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* TDM_STRB2 */
- /* PD11 */ { CONF, GPIO, 0, DOUT, ACTV, 0 }, /* N/C */
- /* PD10 */ { CONF, SPEC, 1, DOUT, ACTV, 0 }, /* BRGO4 (MCLK) */
- /* PD9 */ { CONF, SPEC, 0, DOUT, ACTV, 0 }, /* SMC1_TX */
- /* PD8 */ { CONF, SPEC, 0, DIN, ACTV, 0 }, /* SMC1_RX */
- /* PD7 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* N/C */
- /* PD6 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* N/C */
- /* PD5 */ { CONF, GPIO, 0, DOUT, ACTV, 1 }, /* N/C */
- /* PD4 */ { CONF, SPEC, 1, DOUT, ACTV, 1 }, /* SMC2_RX */
- /* PD3 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PD2 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PD1 */ { SKIP, GPIO, 0, DIN, ACTV, 0 }, /* pin doesn't exist */
- /* PD0 */ { SKIP, GPIO, 0, DIN, ACTV, 0 } /* pin doesn't exist */
- }
-};
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
deleted file mode 100644
index 91c4987..0000000
--- a/board/sacsng/sacsng.c
+++ /dev/null
@@ -1,848 +0,0 @@
-/*
- * (C) Copyright 2002
- * Custom IDEAS, Inc. <www.cideas.com>
- * Gerald Van Baren <vanbaren@cideas.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/u-boot.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <i2c.h>
-#include <spi.h>
-#include <command.h>
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-#include <status_led.h>
-#endif
-
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
-extern void eth_loopback_test(void);
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
-#include "clkinit.h"
-#include "ioconfig.h" /* I/O configuration table */
-
-/*
- * PBI Page Based Interleaving
- * PSDMR_PBI page based interleaving
- * 0 bank based interleaving
- * External Address Multiplexing (EAMUX) adds a clock to address cycles
- * (this can help with marginal board layouts)
- * PSDMR_EAMUX adds a clock
- * 0 no extra clock
- * Buffer Command (BUFCMD) adds a clock to command cycles.
- * PSDMR_BUFCMD adds a clock
- * 0 no extra clock
- */
-#define CONFIG_PBI PSDMR_PBI
-#define PESSIMISTIC_SDRAM 0
-#define EAMUX 0 /* EST requires EAMUX */
-#define BUFCMD 0
-
-/*
- * ADC/DAC Defines:
- */
-#define INITIAL_SAMPLE_RATE 10016 /* Initial Daq sample rate */
-#define INITIAL_RIGHT_JUST 0 /* Initial DAC right justification */
-#define INITIAL_MCLK_DIVIDE 0 /* Initial MCLK Divide */
-#define INITIAL_SAMPLE_64X 1 /* Initial 64x clocking mode */
-#define INITIAL_SAMPLE_128X 0 /* Initial 128x clocking mode */
-
-/*
- * ADC Defines:
- */
-#define I2C_ADC_1_ADDR 0x0E /* I2C Address of the ADC #1 */
-#define I2C_ADC_2_ADDR 0x0F /* I2C Address of the ADC #2 */
-
-#define ADC_SDATA1_MASK 0x00020000 /* PA14 - CH12SDATA_PU */
-#define ADC_SDATA2_MASK 0x00010000 /* PA15 - CH34SDATA_PU */
-
-#define ADC_VREF_CAP 100 /* VREF capacitor in uF */
-#define ADC_INITIAL_DELAY (10 * ADC_VREF_CAP) /* 10 usec per uF, in usec */
-#define ADC_SDATA_DELAY 100 /* ADC SDATA release delay in usec */
-#define ADC_CAL_DELAY (1000000 / INITIAL_SAMPLE_RATE * 4500)
- /* Wait at least 4100 LRCLK's */
-
-#define ADC_REG1_FRAME_START 0x80 /* Frame start */
-#define ADC_REG1_GROUND_CAL 0x40 /* Ground calibration enable */
-#define ADC_REG1_ANA_MOD_PDOWN 0x20 /* Analog modulator section in power down */
-#define ADC_REG1_DIG_MOD_PDOWN 0x10 /* Digital modulator section in power down */
-
-#define ADC_REG2_128x 0x80 /* Oversample at 128x */
-#define ADC_REG2_CAL 0x40 /* System calibration enable */
-#define ADC_REG2_CHANGE_SIGN 0x20 /* Change sign enable */
-#define ADC_REG2_LR_DISABLE 0x10 /* Left/Right output disable */
-#define ADC_REG2_HIGH_PASS_DIS 0x08 /* High pass filter disable */
-#define ADC_REG2_SLAVE_MODE 0x04 /* Slave mode */
-#define ADC_REG2_DFS 0x02 /* Digital format select */
-#define ADC_REG2_MUTE 0x01 /* Mute */
-
-#define ADC_REG7_ADDR_ENABLE 0x80 /* Address enable */
-#define ADC_REG7_PEAK_ENABLE 0x40 /* Peak enable */
-#define ADC_REG7_PEAK_UPDATE 0x20 /* Peak update */
-#define ADC_REG7_PEAK_FORMAT 0x10 /* Peak display format */
-#define ADC_REG7_DIG_FILT_PDOWN 0x04 /* Digital filter power down enable */
-#define ADC_REG7_FIR2_IN_EN 0x02 /* External FIR2 input enable */
-#define ADC_REG7_PSYCHO_EN 0x01 /* External pyscho filter input enable */
-
-/*
- * DAC Defines:
- */
-
-#define I2C_DAC_ADDR 0x11 /* I2C Address of the DAC */
-
-#define DAC_RST_MASK 0x00008000 /* PA16 - DAC_RST* */
-#define DAC_RESET_DELAY 100 /* DAC reset delay in usec */
-#define DAC_INITIAL_DELAY 5000 /* DAC initialization delay in usec */
-
-#define DAC_REG1_AMUTE 0x80 /* Auto-mute */
-
-#define DAC_REG1_LEFT_JUST_24_BIT (0 << 4) /* Fmt 0: Left justified 24 bit */
-#define DAC_REG1_I2S_24_BIT (1 << 4) /* Fmt 1: I2S up to 24 bit */
-#define DAC_REG1_RIGHT_JUST_16BIT (2 << 4) /* Fmt 2: Right justified 16 bit */
-#define DAC_REG1_RIGHT_JUST_24BIT (3 << 4) /* Fmt 3: Right justified 24 bit */
-#define DAC_REG1_RIGHT_JUST_20BIT (4 << 4) /* Fmt 4: Right justified 20 bit */
-#define DAC_REG1_RIGHT_JUST_18BIT (5 << 4) /* Fmt 5: Right justified 18 bit */
-
-#define DAC_REG1_DEM_NO (0 << 2) /* No De-emphasis */
-#define DAC_REG1_DEM_44KHZ (1 << 2) /* 44.1KHz De-emphasis */
-#define DAC_REG1_DEM_48KHZ (2 << 2) /* 48KHz De-emphasis */
-#define DAC_REG1_DEM_32KHZ (3 << 2) /* 32KHz De-emphasis */
-
-#define DAC_REG1_SINGLE 0 /* 4- 50KHz sample rate */
-#define DAC_REG1_DOUBLE 1 /* 50-100KHz sample rate */
-#define DAC_REG1_QUAD 2 /* 100-200KHz sample rate */
-#define DAC_REG1_DSD 3 /* Direct Stream Data, DSD */
-
-#define DAC_REG5_INVERT_A 0x80 /* Invert channel A */
-#define DAC_REG5_INVERT_B 0x40 /* Invert channel B */
-#define DAC_REG5_I2C_MODE 0x20 /* Control port (I2C) mode */
-#define DAC_REG5_POWER_DOWN 0x10 /* Power down mode */
-#define DAC_REG5_MUTEC_A_B 0x08 /* Mutec A=B */
-#define DAC_REG5_FREEZE 0x04 /* Freeze */
-#define DAC_REG5_MCLK_DIV 0x02 /* MCLK divide by 2 */
-#define DAC_REG5_RESERVED 0x01 /* Reserved */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard(void)
-{
- printf("SACSng\n");
-
- return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0;
- volatile uchar *ramaddr = (uchar *)(CONFIG_SYS_SDRAM_BASE + 0x8);
- uint psdmr = CONFIG_SYS_PSDMR;
- int i;
- uint psrt = 14; /* for no SPD */
- uint chipselects = 1; /* for no SPD */
- uint sdram_size = CONFIG_SYS_SDRAM0_SIZE * 1024 * 1024; /* for no SPD */
- uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */
-
-#ifdef SDRAM_SPD_ADDR
- uint data_width;
- uint rows;
- uint banks;
- uint cols;
- uint caslatency;
- uint width;
- uint rowst;
- uint sdam;
- uint bsma;
- uint sda10;
- u_char data;
- u_char cksum;
- int j;
-#endif
-
-#ifdef SDRAM_SPD_ADDR
- /* Keep the compiler from complaining about potentially uninitialized vars */
- data_width = chipselects = rows = banks = cols = caslatency = psrt =
- 0;
-
- /*
- * Read the SDRAM SPD EEPROM via I2C.
- */
- i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
- cksum = data;
- for (j = 1; j < 64; j++) { /* read only the checksummed bytes */
- /* note: the I2C address autoincrements when alen == 0 */
- i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
- if (j == 5)
- chipselects = data & 0x0F;
- else if (j == 6)
- data_width = data;
- else if (j == 7)
- data_width |= data << 8;
- else if (j == 3)
- rows = data & 0x0F;
- else if (j == 4)
- cols = data & 0x0F;
- else if (j == 12) {
- /*
- * Refresh rate: this assumes the prescaler is set to
- * approximately 1uSec per tick.
- */
- switch (data & 0x7F) {
- default:
- case 0:
- psrt = 14; /* 15.625uS */
- break;
- case 1:
- psrt = 2; /* 3.9uS */
- break;
- case 2:
- psrt = 6; /* 7.8uS */
- break;
- case 3:
- psrt = 29; /* 31.3uS */
- break;
- case 4:
- psrt = 60; /* 62.5uS */
- break;
- case 5:
- psrt = 120; /* 125uS */
- break;
- }
- } else if (j == 17)
- banks = data;
- else if (j == 18) {
- caslatency = 3; /* default CL */
-#if(PESSIMISTIC_SDRAM)
- if ((data & 0x04) != 0)
- caslatency = 3;
- else if ((data & 0x02) != 0)
- caslatency = 2;
- else if ((data & 0x01) != 0)
- caslatency = 1;
-#else
- if ((data & 0x01) != 0)
- caslatency = 1;
- else if ((data & 0x02) != 0)
- caslatency = 2;
- else if ((data & 0x04) != 0)
- caslatency = 3;
-#endif
- else {
- printf("WARNING: Unknown CAS latency 0x%02X, using 3\n", data);
- }
- } else if (j == 63) {
- if (data != cksum) {
- printf("WARNING: Configuration data checksum failure:" " is 0x%02x, calculated 0x%02x\n", data, cksum);
- }
- }
- cksum += data;
- }
-
- /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
- if (caslatency < 2) {
- printf("WARNING: CL was %d, forcing to 2\n", caslatency);
- caslatency = 2;
- }
- if (rows > 14) {
- printf("WARNING: This doesn't look good, rows = %d, should be <= 14\n",
- rows);
- rows = 14;
- }
- if (cols > 11) {
- printf("WARNING: This doesn't look good, columns = %d, should be <= 11\n",
- cols);
- cols = 11;
- }
-
- if ((data_width != 64) && (data_width != 72)) {
- printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
- data_width);
- }
- width = 3; /* 2^3 = 8 bytes = 64 bits wide */
- /*
- * Convert banks into log2(banks)
- */
- if (banks == 2)
- banks = 1;
- else if (banks == 4)
- banks = 2;
- else if (banks == 8)
- banks = 3;
-
- sdram_size = 1 << (rows + cols + banks + width);
-
-#if(CONFIG_PBI == 0) /* bank-based interleaving */
- rowst = ((32 - 6) - (rows + cols + width)) * 2;
-#else
- rowst = 32 - (rows + banks + cols + width);
-#endif
-
- or = ~(sdram_size - 1) | /* SDAM address mask */
- ((banks - 1) << 13) | /* banks per device */
- (rowst << 9) | /* rowst */
- ((rows - 9) << 6); /* numr */
-
- memctl->memc_or2 = or;
-
- /*
- * SDAM specifies the number of columns that are multiplexed
- * (reference AN2165/D), defined to be (columns - 6) for page
- * interleave, (columns - 8) for bank interleave.
- *
- * BSMA is 14 - max(rows, cols). The bank select lines come
- * into play above the highest "address" line going into the
- * the SDRAM.
- */
-#if(CONFIG_PBI == 0) /* bank-based interleaving */
- sdam = cols - 8;
- bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
- sda10 = sdam + 2;
-#else
- sdam = cols - 6;
- bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
- sda10 = sdam;
-#endif
-#if(PESSIMISTIC_SDRAM)
- psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_16_CLK |
- PSDMR_PRETOACT_8W | PSDMR_ACTTORW_8W | PSDMR_WRC_4C |
- PSDMR_EAMUX | PSDMR_BUFCMD) | caslatency |
- ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
- (sdam << 24) | (bsma << 21) | (sda10 << 18);
-#else
- psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_7_CLK |
- PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */
- PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */
- PSDMR_WRC_1C | /* 1 clock + 7nSec */
- EAMUX | BUFCMD) |
- caslatency | ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */
- (sdam << 24) | (bsma << 21) | (sda10 << 18);
-#endif
-#endif
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * Quote from Micron MT48LC8M16A2 data sheet:
- *
- * "...the SDRAM requires a 100uS delay prior to issuing any
- * command other than a COMMAND INHIBIT or NOP. Starting at some
- * point during this 100uS period and continuing at least through
- * the end of this period, COMMAND INHIBIT or NOP commands should
- * be applied."
- *
- * "Once the 100uS delay has been satisfied with at least one COMMAND
- * INHIBIT or NOP command having been applied, a /PRECHARGE command/
- * should be applied. All banks must then be precharged, thereby
- * placing the device in the all banks idle state."
- *
- * "Once in the idle state, /two/ AUTO REFRESH cycles must be
- * performed. After the AUTO REFRESH cycles are complete, the
- * SDRAM is ready for mode register programming."
- *
- * (/emphasis/ mine, gvb)
- *
- * The way I interpret this, Micron start up sequence is:
- * 1. Issue a PRECHARGE-BANK command (initial precharge)
- * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
- * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
- * 4. Issue a MODE-SET command to initialize the mode register
- *
- * --------
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
- memctl->memc_psrt = psrt;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
-
- /*
- * Do it a second time for the second set of chips if the DIMM has
- * two chip selects (double sided).
- */
- if (chipselects > 1) {
- ramaddr += sdram_size;
-
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size;
- memctl->memc_or3 = or;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
- }
-
- /* return total ram size */
- return (sdram_size * chipselects);
-}
-
-/*-----------------------------------------------------------------------
- * Board Control Functions
- */
-void board_poweroff(void)
-{
- while (1); /* hang forever */
-}
-
-
-#ifdef CONFIG_MISC_INIT_R
-/* ------------------------------------------------------------------------- */
-int misc_init_r(void)
-{
- /*
- * Note: iop is used by the I2C macros, and iopa by the ADC/DAC initialization.
- */
- volatile ioport_t *iopa =
- ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0 /* port A */ );
- volatile ioport_t *iop =
- ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
-
- int reg; /* I2C register value */
- char *ep; /* Environment pointer */
- char str_buf[12]; /* sprintf output buffer */
- int sample_rate; /* ADC/DAC sample rate */
- int sample_64x; /* Use 64/4 clocking for the ADC/DAC */
- int sample_128x; /* Use 128/4 clocking for the ADC/DAC */
- int right_just; /* Is the data to the DAC right justified? */
- int mclk_divide; /* MCLK Divide */
- int quiet; /* Quiet or minimal output mode */
-
- quiet = 0;
-
- if ((ep = getenv("quiet")) != NULL)
- quiet = simple_strtol(ep, NULL, 10);
- else
- setenv("quiet", "0");
-
- /*
- * SACSng custom initialization:
- * Start the ADC and DAC clocks, since the Crystal parts do not
- * work on the I2C bus until the clocks are running.
- */
-
- sample_rate = INITIAL_SAMPLE_RATE;
- if ((ep = getenv("DaqSampleRate")) != NULL)
- sample_rate = simple_strtol(ep, NULL, 10);
-
- sample_64x = INITIAL_SAMPLE_64X;
- sample_128x = INITIAL_SAMPLE_128X;
- if ((ep = getenv("Daq64xSampling")) != NULL) {
- sample_64x = simple_strtol(ep, NULL, 10);
- if (sample_64x)
- sample_128x = 0;
- else
- sample_128x = 1;
- } else {
- if ((ep = getenv("Daq128xSampling")) != NULL) {
- sample_128x = simple_strtol(ep, NULL, 10);
- if (sample_128x)
- sample_64x = 0;
- else
- sample_64x = 1;
- }
- }
-
- /*
- * Stop the clocks and wait for at least 1 LRCLK period
- * to make sure the clocking has really stopped.
- */
- Daq_Stop_Clocks();
- udelay((1000000 / sample_rate) * NUM_LRCLKS_TO_STABILIZE);
-
- /*
- * Initialize the clocks with the new rates
- */
- Daq_Init_Clocks(sample_rate, sample_64x);
- sample_rate = Daq_Get_SampleRate();
-
- /*
- * Start the clocks and wait for at least 1 LRCLK period
- * to make sure the clocking has become stable.
- */
- Daq_Start_Clocks(sample_rate);
- udelay((1000000 / sample_rate) * NUM_LRCLKS_TO_STABILIZE);
-
- sprintf(str_buf, "%d", sample_rate);
- setenv("DaqSampleRate", str_buf);
-
- if (sample_64x) {
- setenv("Daq64xSampling", "1");
- setenv("Daq128xSampling", NULL);
- } else {
- setenv("Daq64xSampling", NULL);
- setenv("Daq128xSampling", "1");
- }
-
- /*
- * Display the ADC/DAC clocking information
- */
- if (!quiet)
- Daq_Display_Clocks();
-
- /*
- * Determine the DAC data justification
- */
-
- right_just = INITIAL_RIGHT_JUST;
- if ((ep = getenv("DaqDACRightJustified")) != NULL)
- right_just = simple_strtol(ep, NULL, 10);
-
- sprintf(str_buf, "%d", right_just);
- setenv("DaqDACRightJustified", str_buf);
-
- /*
- * Determine the DAC MCLK Divide
- */
-
- mclk_divide = INITIAL_MCLK_DIVIDE;
- if ((ep = getenv("DaqDACMClockDivide")) != NULL)
- mclk_divide = simple_strtol(ep, NULL, 10);
-
- sprintf(str_buf, "%d", mclk_divide);
- setenv("DaqDACMClockDivide", str_buf);
-
- /*
- * Initializing the I2C address in the Crystal A/Ds:
- *
- * 1) Wait for VREF cap to settle (10uSec per uF)
- * 2) Release pullup on SDATA
- * 3) Write the I2C address to register 6
- * 4) Enable address matching by setting the MSB in register 7
- */
-
- if (!quiet)
- printf("Initializing the ADC...\n");
-
- udelay(ADC_INITIAL_DELAY); /* 10uSec per uF of VREF cap */
-
- iopa->pdat &= ~ADC_SDATA1_MASK; /* release SDATA1 */
- udelay(ADC_SDATA_DELAY); /* arbitrary settling time */
-
- i2c_reg_write(0x00, 0x06, I2C_ADC_1_ADDR); /* set address */
- i2c_reg_write(I2C_ADC_1_ADDR, 0x07, /* turn on ADDREN */
- ADC_REG7_ADDR_ENABLE);
-
- i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* 128x, slave mode, !HPEN */
- (sample_64x ? 0 : ADC_REG2_128x) |
- ADC_REG2_HIGH_PASS_DIS | ADC_REG2_SLAVE_MODE);
-
- reg = i2c_reg_read(I2C_ADC_1_ADDR, 0x06) & 0x7F;
- if (reg != I2C_ADC_1_ADDR) {
- printf("Init of ADC U10 failed: address is 0x%02X should be 0x%02X\n",
- reg, I2C_ADC_1_ADDR);
- }
-
- iopa->pdat &= ~ADC_SDATA2_MASK; /* release SDATA2 */
- udelay(ADC_SDATA_DELAY); /* arbitrary settling time */
-
- /* set address (do not set ADDREN yet) */
- i2c_reg_write(0x00, 0x06, I2C_ADC_2_ADDR);
-
- i2c_reg_write(I2C_ADC_2_ADDR, 0x02, /* 64x, slave mode, !HPEN */
- (sample_64x ? 0 : ADC_REG2_128x) |
- ADC_REG2_HIGH_PASS_DIS | ADC_REG2_SLAVE_MODE);
-
- reg = i2c_reg_read(I2C_ADC_2_ADDR, 0x06) & 0x7F;
- if (reg != I2C_ADC_2_ADDR) {
- printf("Init of ADC U15 failed: address is 0x%02X should be 0x%02X\n",
- reg, I2C_ADC_2_ADDR);
- }
-
- i2c_reg_write(I2C_ADC_1_ADDR, 0x01, /* set FSTART and GNDCAL */
- ADC_REG1_FRAME_START | ADC_REG1_GROUND_CAL);
-
- i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* Start calibration */
- (sample_64x ? 0 : ADC_REG2_128x) |
- ADC_REG2_CAL |
- ADC_REG2_HIGH_PASS_DIS | ADC_REG2_SLAVE_MODE);
-
- udelay(ADC_CAL_DELAY); /* a minimum of 4100 LRCLKs */
- i2c_reg_write(I2C_ADC_1_ADDR, 0x01, 0x00); /* remove GNDCAL */
-
- /*
- * Now that we have synchronized the ADC's, enable address
- * selection on the second ADC as well as the first.
- */
- i2c_reg_write(I2C_ADC_2_ADDR, 0x07, ADC_REG7_ADDR_ENABLE);
-
- /*
- * Initialize the Crystal DAC
- *
- * Two of the config lines are used for I2C so we have to set them
- * to the proper initialization state without inadvertantly
- * sending an I2C "start" sequence. When we bring the I2C back to
- * the normal state, we send an I2C "stop" sequence.
- */
- if (!quiet)
- printf("Initializing the DAC...\n");
-
- /*
- * Bring the I2C clock and data lines low for initialization
- */
- I2C_SCL(0);
- I2C_DELAY;
- I2C_SDA(0);
- I2C_ACTIVE;
- I2C_DELAY;
-
- /* Reset the DAC */
- iopa->pdat &= ~DAC_RST_MASK;
- udelay(DAC_RESET_DELAY);
-
- /* Release the DAC reset */
- iopa->pdat |= DAC_RST_MASK;
- udelay(DAC_INITIAL_DELAY);
-
- /*
- * Cause the DAC to:
- * Enable control port (I2C mode)
- * Going into power down
- */
- i2c_reg_write(I2C_DAC_ADDR, 0x05,
- DAC_REG5_I2C_MODE | DAC_REG5_POWER_DOWN);
-
- /*
- * Cause the DAC to:
- * Enable control port (I2C mode)
- * Going into power down
- * . MCLK divide by 1
- * . MCLK divide by 2
- */
- i2c_reg_write(I2C_DAC_ADDR, 0x05,
- DAC_REG5_I2C_MODE |
- DAC_REG5_POWER_DOWN |
- (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
-
- /*
- * Cause the DAC to:
- * Auto-mute disabled
- * . Format 0, left justified 24 bits
- * . Format 3, right justified 24 bits
- * No de-emphasis
- * . Single speed mode
- * . Double speed mode
- */
- i2c_reg_write(I2C_DAC_ADDR, 0x01,
- (right_just ? DAC_REG1_RIGHT_JUST_24BIT :
- DAC_REG1_LEFT_JUST_24_BIT) |
- DAC_REG1_DEM_NO |
- (sample_rate >=
- 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE));
-
- sprintf(str_buf, "%d",
- sample_rate >= 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE);
- setenv("DaqDACFunctionalMode", str_buf);
-
- /*
- * Cause the DAC to:
- * Enable control port (I2C mode)
- * Remove power down
- * . MCLK divide by 1
- * . MCLK divide by 2
- */
- i2c_reg_write(I2C_DAC_ADDR, 0x05,
- DAC_REG5_I2C_MODE |
- (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
-
- /*
- * Create a I2C stop condition:
- * low->high on data while clock is high.
- */
- I2C_SCL(1);
- I2C_DELAY;
- I2C_SDA(1);
- I2C_DELAY;
- I2C_TRISTATE;
-
- if (!quiet)
- printf("\n");
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
- /*
- * Run the Ethernet loopback test
- */
- eth_loopback_test();
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
- /*
- * Turn off the RED fail LED now that we are up and running.
- */
- status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-/*
- * Show boot status: flash the LED if something goes wrong, indicating
- * that last thing that worked and thus, by implication, what is broken.
- *
- * This stores the last OK value in RAM so this will not work properly
- * before RAM is initialized. Since it is being used for indicating
- * boot status (i.e. after RAM is initialized), that is OK.
- */
-static void flash_code(uchar number, uchar modulo, uchar digits)
-{
- int j;
-
- /*
- * Recursively do upper digits.
- */
- if (digits > 1)
- flash_code(number / modulo, modulo, digits - 1);
-
- number = number % modulo;
-
- /*
- * Zero is indicated by one long flash (dash).
- */
- if (number == 0) {
- status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
- udelay(1000000);
- status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
- udelay(200000);
- } else {
- /*
- * Non-zero is indicated by short flashes, one per count.
- */
- for (j = 0; j < number; j++) {
- status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
- udelay(100000);
- status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
- udelay(200000);
- }
- }
- /*
- * Inter-digit pause: we've already waited 200 mSec, wait 1 sec total
- */
- udelay(700000);
-}
-
-static int last_boot_progress;
-
-void show_boot_progress(int status)
-{
- int i, j;
-
- if (status > 0) {
- last_boot_progress = status;
- } else {
- /*
- * If a specific failure code is given, flash this code
- * else just use the last success code we've seen
- */
- if (status < -1)
- last_boot_progress = -status;
-
- /*
- * Flash this code 5 times
- */
- for (j = 0; j < 5; j++) {
- /*
- * Houston, we have a problem.
- * Blink the last OK status which indicates where things failed.
- */
- status_led_set(STATUS_LED_RED, STATUS_LED_ON);
- flash_code(last_boot_progress, 5, 3);
-
- /*
- * Delay 5 seconds between repetitions,
- * with the fault LED blinking
- */
- for (i = 0; i < 5; i++) {
- status_led_set(STATUS_LED_RED,
- STATUS_LED_OFF);
- udelay(500000);
- status_led_set(STATUS_LED_RED, STATUS_LED_ON);
- udelay(500000);
- }
- }
-
- /*
- * Reset the board to retry initialization.
- */
- do_reset(NULL, 0, 0, NULL);
- }
-}
-#endif /* CONFIG_SHOW_BOOT_PROGRESS */
-
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#if defined(CONFIG_CMD_SPI)
-
-#define SPI_ADC_CS_MASK 0x00000800
-#define SPI_DAC_CS_MASK 0x00001000
-
-static const u32 cs_mask[] = {
- SPI_ADC_CS_MASK,
- SPI_DAC_CS_MASK,
-};
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs < sizeof(cs_mask) / sizeof(cs_mask[0]);
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- volatile ioport_t *iopd =
- ioport_addr((immap_t *) CONFIG_SYS_IMMR, 3 /* port D */ );
-
- iopd->pdat &= ~cs_mask[slave->cs];
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- volatile ioport_t *iopd =
- ioport_addr((immap_t *) CONFIG_SYS_IMMR, 3 /* port D */ );
-
- iopd->pdat |= cs_mask[slave->cs];
-}
-
-#endif
-
-#endif /* CONFIG_MISC_INIT_R */