diff options
Diffstat (limited to 'board/renesas/silk')
| -rw-r--r-- | board/renesas/silk/silk.c | 59 |
1 files changed, 57 insertions, 2 deletions
diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c index dfd9a9d..021baab 100644 --- a/board/renesas/silk/silk.c +++ b/board/renesas/silk/silk.c @@ -9,6 +9,8 @@ #include <common.h> #include <malloc.h> +#include <dm.h> +#include <dm/platform_data/serial_sh.h> #include <asm/processor.h> #include <asm/mach-types.h> #include <asm/io.h> @@ -18,6 +20,7 @@ #include <asm/arch/rmobile.h> #include <asm/arch/rcar-mstp.h> #include <asm/arch/mmc.h> +#include <asm/arch/sh_sdhi.h> #include <netdev.h> #include <miiphy.h> #include <i2c.h> @@ -45,6 +48,10 @@ void s_init(void) #define ETHER_MSTP813 (1 << 13) #define IIC1_MSTP323 (1 << 23) #define MMC0_MSTP315 (1 << 15) +#define SDHI1_MSTP312 (1 << 12) + +#define SD1CKCR 0xE6150078 +#define SD1_97500KHZ 0x7 int board_early_init_f(void) { @@ -64,9 +71,24 @@ int board_early_init_f(void) /* MMC */ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315); #endif + +#ifdef CONFIG_SH_SDHI + /* SDHI1 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI1_MSTP312); + + /* + * Set SD1 to the 97.5MHz + */ + writel(SD1_97500KHZ, SD1CKCR); +#endif return 0; } +/* LSI pin pull-up control */ +#define PUPR3 0xe606010C +#define PUPR3_ETH 0x006FF800 +#define PUPR1 0xe6060104 +#define PUPR1_DREQ0_N (1 << 20) int board_init(void) { /* adress of boot parameters */ @@ -91,7 +113,10 @@ int board_init(void) gpio_request(GPIO_FN_IRQ8, NULL); /* PHY reset */ + mstp_clrbits_le32(PUPR3, PUPR3, PUPR3_ETH); gpio_request(GPIO_GP_1_24, NULL); + mstp_clrbits_le32(PUPR1, PUPR1, PUPR1_DREQ0_N); + gpio_direction_output(GPIO_GP_1_24, 0); mdelay(20); gpio_set_value(GPIO_GP_1_24, 1); @@ -129,15 +154,33 @@ int board_eth_init(bd_t *bis) int board_mmc_init(bd_t *bis) { - int ret = 0; + int ret = -ENODEV; #ifdef CONFIG_SH_MMCIF /* MMC0 */ gpio_request(GPIO_GP_4_31, NULL); - gpio_set_value(GPIO_GP_4_31, 1); + gpio_direction_output(GPIO_GP_4_31, 1); ret = mmcif_mmc_init(); #endif + +#ifdef CONFIG_SH_SDHI + gpio_request(GPIO_FN_SD1_DATA0, NULL); + gpio_request(GPIO_FN_SD1_DATA1, NULL); + gpio_request(GPIO_FN_SD1_DATA2, NULL); + gpio_request(GPIO_FN_SD1_DATA3, NULL); + gpio_request(GPIO_FN_SD1_CLK, NULL); + gpio_request(GPIO_FN_SD1_CMD, NULL); + gpio_request(GPIO_FN_SD1_CD, NULL); + + /* SDHI 1 */ + gpio_request(GPIO_GP_4_26, NULL); + gpio_request(GPIO_GP_4_29, NULL); + gpio_direction_output(GPIO_GP_4_26, 1); + gpio_direction_output(GPIO_GP_4_29, 1); + + ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0); +#endif return ret; } @@ -161,3 +204,15 @@ void reset_cpu(ulong addr) val |= 0x02; i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); } + +static const struct sh_serial_platdata serial_platdata = { + .base = SCIF2_BASE, + .type = PORT_SCIF, + .clk = 14745600, + .clk_mode = EXT_CLK, +}; + +U_BOOT_DEVICE(silk_serials) = { + .name = "serial_sh", + .platdata = &serial_platdata, +}; |