diff options
Diffstat (limited to 'board/prodrive/pdnb3')
| -rw-r--r-- | board/prodrive/pdnb3/Makefile | 46 | ||||
| -rw-r--r-- | board/prodrive/pdnb3/config.mk | 4 | ||||
| -rw-r--r-- | board/prodrive/pdnb3/flash.c | 85 | ||||
| -rw-r--r-- | board/prodrive/pdnb3/nand.c | 171 | ||||
| -rw-r--r-- | board/prodrive/pdnb3/pdnb3.c | 249 | ||||
| -rw-r--r-- | board/prodrive/pdnb3/u-boot.lds | 56 |
6 files changed, 611 insertions, 0 deletions
diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile new file mode 100644 index 0000000..f3cd5a3 --- /dev/null +++ b/board/prodrive/pdnb3/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := flash.o pdnb3.o nand.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk new file mode 100644 index 0000000..6b0f18b --- /dev/null +++ b/board/prodrive/pdnb3/config.mk @@ -0,0 +1,4 @@ +TEXT_BASE = 0x01f00000 + +# include NPE ethernet driver +BOARDLIBS = cpu/ixp/npe/libnpe.a diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c new file mode 100644 index 0000000..d0e5fe7 --- /dev/null +++ b/board/prodrive/pdnb3/flash.c @@ -0,0 +1,85 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/ixp425.h> + +/* + * include common flash code (for esd boards) + */ +#include "../common/flash.c" + +/* + * Prototypes + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info); + +static inline ulong ld(ulong x) +{ + ulong k = 0; + + while (x >>= 1) + ++k; + + return k; +} + +unsigned long flash_init(void) +{ + unsigned long size; + int i; + + /* Init: no FLASHes known */ + for (i=0; i<CFG_MAX_FLASH_BANKS; i++) + flash_info[i].flash_id = FLASH_UNKNOWN; + + size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) + printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size, size<<20); + + /* Reconfigure CS0 to actual FLASH size */ + *IXP425_EXP_CS0 = (*IXP425_EXP_CS0 & ~0x00003C00) | ((ld(size) - 9) << 10); + + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_MONITOR_BASE, CFG_MONITOR_BASE + monitor_flash_len - 1, + &flash_info[CFG_MAX_FLASH_BANKS - 1]); + + /* Environment protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[CFG_MAX_FLASH_BANKS - 1]); + + /* Redundant environment protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, + &flash_info[CFG_MAX_FLASH_BANKS - 1]); + + flash_info[0].size = size; + + return size; +} diff --git a/board/prodrive/pdnb3/nand.c b/board/prodrive/pdnb3/nand.c new file mode 100644 index 0000000..1931d64 --- /dev/null +++ b/board/prodrive/pdnb3/nand.c @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> + +struct pdnb3_ndfc_regs { + uchar cmd; + uchar wait; + uchar addr; + uchar term; + uchar data; +}; + +static u8 hwctl; +static struct pdnb3_ndfc_regs *pdnb3_ndfc; + +#define readb(addr) *(volatile u_char *)(addr) +#define readl(addr) *(volatile u_long *)(addr) +#define writeb(d,addr) *(volatile u_char *)(addr) = (d) + +/* + * The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to + * the NAND devices. The NDFC has command, address and data registers that + * when accessed will set up the NAND flash pins appropriately. We'll use the + * hwcontrol function to save the configuration in a global variable. + * We can then use this information in the read and write functions to + * determine which NDFC register to access. + * + * There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte). + */ +static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch (cmd) { + case NAND_CTL_SETCLE: + hwctl |= 0x1; + break; + case NAND_CTL_CLRCLE: + hwctl &= ~0x1; + break; + + case NAND_CTL_SETALE: + hwctl |= 0x2; + break; + case NAND_CTL_CLRALE: + hwctl &= ~0x2; + break; + + case NAND_CTL_SETNCE: + break; + case NAND_CTL_CLRNCE: + writeb(0x00, &(pdnb3_ndfc->term)); + break; + } +} + +static void pdnb3_nand_write_byte(struct mtd_info *mtd, u_char byte) +{ + if (hwctl & 0x1) + writeb(byte, &(pdnb3_ndfc->cmd)); + else if (hwctl & 0x2) + writeb(byte, &(pdnb3_ndfc->addr)); + else + writeb(byte, &(pdnb3_ndfc->data)); +} + +static u_char pdnb3_nand_read_byte(struct mtd_info *mtd) +{ + return readb(&(pdnb3_ndfc->data)); +} + +static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) { + if (hwctl & 0x1) + writeb(buf[i], &(pdnb3_ndfc->cmd)); + else if (hwctl & 0x2) + writeb(buf[i], &(pdnb3_ndfc->addr)); + else + writeb(buf[i], &(pdnb3_ndfc->data)); + } +} + +static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + + if (len % 4) { + for (i = 0; i < len; i++) + buf[i] = readb(&(pdnb3_ndfc->data)); + } else { + ulong *ptr = (ulong *)buf; + int count = len >> 2; + + for (i = 0; i < count; i++) + *ptr++ = readl(&(pdnb3_ndfc->data)); + } +} + +static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + if (buf[i] != readb(&(pdnb3_ndfc->data))) + return i; + + return 0; +} + +static int pdnb3_nand_dev_ready(struct mtd_info *mtd) +{ + volatile u_char val; + + /* + * Blocking read to wait for NAND to be ready + */ + val = readb(&(pdnb3_ndfc->wait)); + + /* + * Return always true + */ + return 1; +} + +void board_nand_init(struct nand_chip *nand) +{ + pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CFG_NAND_BASE; + + nand->eccmode = NAND_ECC_SOFT; + + /* Set address of NAND IO lines (Using Linear Data Access Region) */ + nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4); + nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4); + /* Reference hardware control function */ + nand->hwcontrol = pdnb3_nand_hwcontrol; + /* Set command delay time */ + nand->hwcontrol = pdnb3_nand_hwcontrol; + nand->write_byte = pdnb3_nand_write_byte; + nand->read_byte = pdnb3_nand_read_byte; + nand->write_buf = pdnb3_nand_write_buf; + nand->read_buf = pdnb3_nand_read_buf; + nand->verify_buf = pdnb3_nand_verify_buf; + nand->dev_ready = pdnb3_nand_dev_ready; +} +#endif diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c new file mode 100644 index 0000000..e2fed5d --- /dev/null +++ b/board/prodrive/pdnb3/pdnb3.c @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <asm/arch/ixp425.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Prototypes */ +int gunzip(void *, int, unsigned char *, unsigned long *); +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +/* predefine these here for FPGA programming (before including fpga.c) */ +#define SET_FPGA(data) *IXP425_GPIO_GPOUTR = (data) +#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_DONE) +#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_INIT) +#define OLD_VAL old_val + +static unsigned long old_val = 0; + +/* + * include common fpga code (for prodrive boards) + */ +#include "../common/fpga.c" + +/* + * Miscelaneous platform dependent initialisations + */ +int board_post_init(void) +{ + return (0); +} + +int board_init(void) +{ + /* arch number of PDNB3 */ + gd->bd->bi_arch_number = MACH_TYPE_PDNB3; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x00000100; + + GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET); + GPIO_OUTPUT_ENABLE(CFG_GPIO_FPGA_RESET); + + GPIO_OUTPUT_SET(CFG_GPIO_SYS_RUNNING); + GPIO_OUTPUT_ENABLE(CFG_GPIO_SYS_RUNNING); + + /* + * Setup GPIO's for FPGA programming + */ + GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG); + GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK); + GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA); + GPIO_OUTPUT_ENABLE(CFG_GPIO_PRG); + GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK); + GPIO_OUTPUT_ENABLE(CFG_GPIO_DATA); + GPIO_OUTPUT_DISABLE(CFG_GPIO_INIT); + GPIO_OUTPUT_DISABLE(CFG_GPIO_DONE); + + /* + * Setup GPIO's for interrupts + */ + GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA); + GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA); + GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB); + GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB); + GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTORE_INT); + GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTORE_INT); + GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTART_INT); + GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTART_INT); + + /* + * Setup GPIO's for 33MHz clock output + */ + *IXP425_GPIO_GPCLKR = 0x01FF0000; + GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK_33M); + + /* + * Setup other chip select's + */ + *IXP425_EXP_CS1 = CFG_EXP_CS1; + + return 0; +} + +/* + * Check Board Identity + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: PDNB3"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return (0); +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} + +int do_fpga_boot(unsigned char *fpgadata) +{ + unsigned char *dst; + int status; + int index; + int i; + ulong len = CFG_MALLOC_LEN; + + /* + * Setup GPIO's for FPGA programming + */ + GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG); + GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK); + GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA); + + /* + * Save value so no readback is required upon programming + */ + old_val = *IXP425_GPIO_GPOUTR; + + /* + * First try to decompress fpga image (gzip compressed?) + */ + dst = malloc(CFG_FPGA_MAX_SIZE); + if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { + printf("Error: Image has to be gzipp'ed!\n"); + return -1; + } + + status = fpga_boot(dst, len); + if (status != 0) { + printf("\nFPGA: Booting failed "); + switch (status) { + case ERROR_FPGA_PRG_INIT_LOW: + printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_INIT_HIGH: + printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); + break; + case ERROR_FPGA_PRG_DONE: + printf("(Timeout: DONE not high after programming FPGA)\n "); + break; + } + + /* display infos on fpgaimage */ + index = 15; + for (i=0; i<4; i++) { + len = dst[index]; + printf("FPGA: %s\n", &(dst[index+1])); + index += len+3; + } + putc ('\n'); + /* delayed reboot */ + for (i=5; i>0; i--) { + printf("Rebooting in %2d seconds \r",i); + for (index=0;index<1000;index++) + udelay(1000); + } + putc('\n'); + do_reset(NULL, 0, 0, NULL); + } + + puts("FPGA: "); + + /* display infos on fpgaimage */ + index = 15; + for (i=0; i<4; i++) { + len = dst[index]; + printf("%s ", &(dst[index+1])); + index += len+3; + } + putc('\n'); + + free(dst); + + /* + * Reset FPGA + */ + GPIO_OUTPUT_CLEAR(CFG_GPIO_FPGA_RESET); + udelay(10); + GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET); + + return (0); +} + +int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + ulong addr; + + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + addr = simple_strtoul(argv[1], NULL, 16); + + return do_fpga_boot((unsigned char *)addr); +} + +U_BOOT_CMD( + fpga, 2, 0, do_fpga, + "fpga - boot FPGA\n", + "address size\n - boot FPGA with gzipped image at <address>\n" +); + +#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_PCI) +extern struct pci_controller hose; +extern void pci_ixp_init(struct pci_controller * hose); + +void pci_init_board(void) +{ + extern void pci_ixp_init (struct pci_controller *hose); + + pci_ixp_init(&hose); +} +#endif diff --git a/board/prodrive/pdnb3/u-boot.lds b/board/prodrive/pdnb3/u-boot.lds new file mode 100644 index 0000000..f05f093 --- /dev/null +++ b/board/prodrive/pdnb3/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/ixp/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} |