diff options
Diffstat (limited to 'board/pm854/pm854.c')
| -rw-r--r-- | board/pm854/pm854.c | 55 |
1 files changed, 31 insertions, 24 deletions
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 7dbafb9..fed0ed4 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -27,6 +27,7 @@ #include <common.h> #include <pci.h> +#include <netdev.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> @@ -45,7 +46,7 @@ long int fixed_sdram(void); int board_early_init_f (void) { #if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR); + volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); pci->peer &= 0xffffffdf; /* disable master abort */ #endif @@ -82,7 +83,7 @@ initdram(int board_type) #if defined(CONFIG_DDR_DLL) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int i,x; x = 10; @@ -132,8 +133,8 @@ initdram(int board_type) void local_bus_init(void) { - volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; @@ -143,8 +144,8 @@ local_bus_init(void) * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * - * If localbus freq is < 66Mhz, DLL bypass mode must be used. - * If localbus freq is > 133Mhz, DLL can be safely enabled. + * If localbus freq is < 66MHz, DLL bypass mode must be used. + * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ @@ -153,10 +154,10 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ } else { /* @@ -171,7 +172,7 @@ local_bus_init(void) lbc->lcrr = 0x10000004; } - lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ udelay(200); /* @@ -185,11 +186,11 @@ local_bus_init(void) } -#if defined(CFG_DRAM_TEST) +#if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; + uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; + uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; uint *p; printf("SDRAM test phase 1:\n"); @@ -226,15 +227,15 @@ int testdram (void) ************************************************************************/ long int fixed_sdram (void) { - #ifndef CFG_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CFG_DDR_CS0_BNDS; - ddr->cs0_config = CFG_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CFG_DDR_TIMING_1; - ddr->timing_cfg_2 = CFG_DDR_TIMING_2; - ddr->sdram_mode = CFG_DDR_MODE; - ddr->sdram_interval = CFG_DDR_INTERVAL; + #ifndef CONFIG_SYS_RAMBOOT + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; @@ -243,14 +244,14 @@ long int fixed_sdram (void) udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ - ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else - ddr->sdram_cfg = CFG_DDR_CONTROL; + ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif - return CFG_SDRAM_SIZE * 1024 * 1024; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ @@ -289,3 +290,9 @@ pci_init_board(void) pci_mpc85xx_init(&hose); #endif /* CONFIG_PCI */ } + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Intialize TSECs first */ + return pci_eth_init(bis); +} |