diff options
Diffstat (limited to 'board/pm826')
| -rw-r--r-- | board/pm826/pm826.c | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c new file mode 100644 index 0000000..c59b028 --- /dev/null +++ b/board/pm826/pm826.c @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ioports.h> +#include <mpc8260.h> + +/* + * I/O Port configuration table + * + * if conf is 1, then that port pin will be configured at boot time + * according to the five values podr/pdir/ppar/psor/pdat for that entry + */ + +const iop_conf_t iop_conf_tab[4][32] = { + + /* Port A configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ + /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ + /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ + /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ + /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ + /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ + /* PA25 */ { 0, 0, 0, 1, 0, 0 }, /* PA25 */ + /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */ + /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ + /* PA22 */ { 0, 0, 0, 1, 0, 0 }, /* PA22 */ + /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ + /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ + /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ + /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ + /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ + /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1*/ + /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ + /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ + /* PA13 */ { 0, 0, 0, 1, 0, 0 }, /* PA13 */ + /* PA12 */ { 0, 0, 0, 1, 0, 0 }, /* PA12 */ + /* PA11 */ { 0, 0, 0, 1, 0, 0 }, /* PA11 */ + /* PA10 */ { 0, 0, 0, 1, 0, 0 }, /* PA10 */ + /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* PA9 */ + /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* PA8 */ + /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */ + /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ + /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */ + /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ + }, + + /* Port B configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* PB31 */ + /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* PB30 */ + /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* PB29 */ + /* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TXD */ + /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* PB27 */ + /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* PB26 */ + /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* PB25 */ + /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* PB24 */ + /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* PB23 */ + /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* PB22 */ + /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* PB21 */ + /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* PB20 */ + /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* PB19 */ + /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* PB18 */ + /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ + /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ + /* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */ + /* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RXD */ + /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ + /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ + /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ + /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ + /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ + /* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TXD */ + /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ + /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ + /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ + /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + }, + + /* Port C */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 CTS */ + /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* SCC2 CTS */ + /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */ + /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ + /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ + /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ + /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* PC23 */ + /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 TXCK */ + /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXCK */ + /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* PC20 */ + /* PC19 */ { 0, 1, 0, 0, 0, 0 }, /* PC19 */ + /* PC18 */ { 0, 1, 0, 0, 0, 0 }, /* PC18 */ + /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ + /* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ + /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 DCD */ + /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* SCC2 DCD */ + /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* SCC3 CTS */ + /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* SCC3 DCD */ + /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* SCC4 CTS */ + /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* SCC4 DCD */ + /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* PC2 */ + /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* PC1 */ + /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* PC0 */ + }, + + /* Port D */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */ + /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* PD30 */ + /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 RTS */ + /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */ + /* PD27 */ { 0, 1, 0, 1, 0, 0 }, /* SCC2 RTS */ + /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ + /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ + /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ + /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* SCC3 RTS */ + /* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4 RXD */ + /* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4 TXD */ + /* PD20 */ { 0, 0, 1, 1, 0, 0 }, /* SCC4 RTS */ + /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ + /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ + /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* PD17 */ + /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* PD16 */ +#if defined(CONFIG_SOFT_I2C) + /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ + /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ +#else +#if defined(CONFIG_HARD_I2C) + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ +#else /* normal I/O port pins */ + /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ + /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */ +#endif +#endif + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* PD9 */ + /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* PD8 */ + /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ + /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ + /* PD4 */ { 1, 1, 1, 0, 0, 0 }, /* SMC2 RXD */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + } +}; + +/* ------------------------------------------------------------------------- */ + +/* Check Board Identity: + */ +int checkboard (void) +{ + puts ("Board: PM826\n"); + return 0; +} + +/* ------------------------------------------------------------------------- */ + + +/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx + * + * This routine performs standard 8260 initialization sequence + * and calculates the available memory size. It may be called + * several times to try different SDRAM configurations on both + * 60x and local buses. + */ +static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, + ulong orx, volatile uchar * base) +{ + volatile uchar c = 0xff; + volatile ulong cnt, val; + volatile ulong *addr; + volatile uint *sdmr_ptr; + volatile uint *orx_ptr; + int i; + ulong save[32]; /* to make test non-destructive */ + ulong maxsize; + + /* We must be able to test a location outsize the maximum legal size + * to find out THAT we are outside; but this address still has to be + * mapped by the controller. That means, that the initial mapping has + * to be (at least) twice as large as the maximum expected size. + */ + maxsize = (1 + (~orx | 0x7fff)) / 2; + + sdmr_ptr = &memctl->memc_psdmr; + orx_ptr = &memctl->memc_or2; + + *orx_ptr = orx; + + /* + * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): + * + * "At system reset, initialization software must set up the + * programmable parameters in the memory controller banks registers + * (ORx, BRx, P/LSDMR). After all memory parameters are configured, + * system software should execute the following initialization sequence + * for each SDRAM device. + * + * 1. Issue a PRECHARGE-ALL-BANKS command + * 2. Issue eight CBR REFRESH commands + * 3. Issue a MODE-SET command to initialize the mode register + * + * The initial commands are executed by setting P/LSDMR[OP] and + * accessing the SDRAM with a single-byte transaction." + * + * The appropriate BRx/ORx registers have already been set when we + * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE. + */ + + *sdmr_ptr = sdmr | PSDMR_OP_PREA; + *base = c; + + *sdmr_ptr = sdmr | PSDMR_OP_CBRR; + for (i = 0; i < 8; i++) + *base = c; + + *sdmr_ptr = sdmr | PSDMR_OP_MRW; + *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */ + + *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; + *base = c; + + /* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + i = 0; + for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { + addr = (volatile ulong *) base + cnt; /* pointer arith! */ + save[i++] = *addr; + *addr = ~cnt; + } + + addr = (volatile ulong *) base; + save[i] = *addr; + *addr = 0; + + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { + addr = (volatile ulong *) base + cnt; /* pointer arith! */ + val = *addr; + *addr = save[--i]; + if (val != ~cnt) { + /* Write the actual size to ORx + */ + *orx_ptr = orx | ~(cnt * sizeof (long) - 1); + return (cnt * sizeof (long)); + } + } + return (maxsize); +} + + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + +#ifndef CFG_RAMBOOT + ulong size8, size9; +#endif + ulong psize = 32 * 1024 * 1024; + + memctl->memc_psrt = CFG_PSRT; + memctl->memc_mptpr = CFG_MPTPR; + +#ifndef CFG_RAMBOOT + size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, + (uchar *) CFG_SDRAM_BASE); + size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL, + (uchar *) CFG_SDRAM_BASE); + + if (size8 < size9) { + psize = size9; + printf ("(60x:9COL) "); + } else { + psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL, + (uchar *) CFG_SDRAM_BASE); + printf ("(60x:8COL) "); + } +#endif + return (psize); +} + +#if (CONFIG_COMMANDS & CFG_CMD_DOC) +extern void doc_probe (ulong physadr); +void doc_init (void) +{ + doc_probe (CFG_DOC_BASE); +} +#endif |