diff options
Diffstat (limited to 'board/palmtreo680')
| -rw-r--r-- | board/palmtreo680/README | 17 |
1 files changed, 0 insertions, 17 deletions
diff --git a/board/palmtreo680/README b/board/palmtreo680/README index 46828eb..c8799c6 100644 --- a/board/palmtreo680/README +++ b/board/palmtreo680/README @@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love to hear from you if you succeed. - Details on the SPL ================== @@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the remainder of u-boot and jumps to it. - The docg4's "reliable mode" =========================== @@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does read in reliable mode, in the same fashion as the IPL. - Details on the IPL and its data format ====================================== @@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation of the IPL, and expects the image to be stored in the same format. - Instructions on Programming u-boot to flash =========================================== @@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the flash using Linux running on the Treo. - Hardware Prerequisites ====================== @@ -136,7 +131,6 @@ A Linux desktop PC. to flash, you'll really want to use a Linux PC. - Treo-side Software Prerequisites ================================ @@ -152,7 +146,6 @@ Linux bootloader for PalmOS: parameters passed to the kernel. - Linux kernel: The kernel on the Treo 680 is still a little rough around the edges, and the @@ -200,7 +193,6 @@ Linux kernel: and /dev/mtd2 for these partitions, respectively. Ensure that your root file system at least has /dev/mtd1 if you are not running udev or mdev. - Userspace Utilities: In addition to everything necessary to provide a useful userspace environment @@ -221,19 +213,16 @@ Userspace Utilities: from the mtd-utils package. - Desktop PC-side Software Prerequisites ====================================== Terminal emulator application: minicom, kermit, etc. - Linux kernel: Compiled with CONFIG_USB_SERIAL enabled. Build this as a module. - Recommended (Not directly related to u-boot) ============================================ @@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when mounting to avoid the need to run a portmapper like rpcbind. - Preliminaries ============= @@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card. If all of the above went well, you can now program u-boot. - Programming u-boot ================== @@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000. Shutdown linux, remove and re-insert the battery, hold your breath... - Enjoying u-boot =============== @@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be corrected soon. - Customizing =========== @@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this should be straightforward. - Restoring PalmOS ================ @@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1 dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1 modprobe -r docg4 - TODO ==== |