summaryrefslogtreecommitdiff
path: root/board/overo
diff options
context:
space:
mode:
Diffstat (limited to 'board/overo')
-rw-r--r--board/overo/overo.c105
-rw-r--r--board/overo/overo.h47
2 files changed, 136 insertions, 16 deletions
diff --git a/board/overo/overo.c b/board/overo/overo.c
index e85be7d..1b67f1f 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -43,6 +43,17 @@
static void setup_net_chip(void);
#endif
+/* GPMC definitions for LAN9221 chips on Tobi expansion boards */
+static const u32 gpmc_lan_config[] = {
+ NET_LAN9221_GPMC_CONFIG1,
+ NET_LAN9221_GPMC_CONFIG2,
+ NET_LAN9221_GPMC_CONFIG3,
+ NET_LAN9221_GPMC_CONFIG4,
+ NET_LAN9221_GPMC_CONFIG5,
+ NET_LAN9221_GPMC_CONFIG6,
+ /*CONFIG7- computed as params */
+};
+
/*
* Routine: board_init
* Description: Early hardware init.
@@ -61,6 +72,70 @@ int board_init(void)
}
/*
+ * Routine: get_board_revision
+ * Description: Returns the board revision
+ */
+int get_board_revision(void)
+{
+ int revision;
+
+ if (!omap_request_gpio(112) &&
+ !omap_request_gpio(113) &&
+ !omap_request_gpio(115)) {
+
+ omap_set_gpio_direction(112, 1);
+ omap_set_gpio_direction(113, 1);
+ omap_set_gpio_direction(115, 1);
+
+ revision = omap_get_gpio_datain(115) << 2 |
+ omap_get_gpio_datain(113) << 1 |
+ omap_get_gpio_datain(112);
+
+ omap_free_gpio(112);
+ omap_free_gpio(113);
+ omap_free_gpio(115);
+ } else {
+ printf("Error: unable to acquire board revision GPIOs\n");
+ revision = -1;
+ }
+
+ return revision;
+}
+
+/*
+ * Routine: get_sdio2_config
+ * Description: Return information about the wifi module connection
+ * Returns 0 if the module connects though a level translator
+ * Returns 1 if the module connects directly
+ */
+int get_sdio2_config(void)
+{
+ int sdio_direct;
+
+ if (!omap_request_gpio(130) && !omap_request_gpio(139)) {
+
+ omap_set_gpio_direction(130, 0);
+ omap_set_gpio_direction(139, 1);
+
+ sdio_direct = 1;
+ omap_set_gpio_dataout(130, 0);
+ if (omap_get_gpio_datain(139) == 0) {
+ omap_set_gpio_dataout(130, 1);
+ if (omap_get_gpio_datain(139) == 1)
+ sdio_direct = 0;
+ }
+
+ omap_free_gpio(130);
+ omap_free_gpio(139);
+ } else {
+ printf("Error: unable to acquire sdio2 clk GPIOs\n");
+ sdio_direct = -1;
+ }
+
+ return sdio_direct;
+}
+
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
@@ -73,6 +148,21 @@ int misc_init_r(void)
setup_net_chip();
#endif
+ printf("Board revision: %d\n", get_board_revision());
+
+ switch (get_sdio2_config()) {
+ case 0:
+ printf("Tranceiver detected on mmc2\n");
+ MUX_OVERO_SDIO2_TRANSCEIVER();
+ break;
+ case 1:
+ printf("Direct connection on mmc2\n");
+ MUX_OVERO_SDIO2_DIRECT();
+ break;
+ default:
+ printf("Unable to detect mmc2 connection type\n");
+ }
+
dieid_num_r();
return 0;
@@ -99,14 +189,13 @@ static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
- /* Configure GPMC registers */
- writel(NET_LAN9221_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
- writel(NET_LAN9221_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
- writel(NET_LAN9221_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
- writel(NET_LAN9221_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
- writel(NET_LAN9221_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
- writel(NET_LAN9221_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
- writel(NET_LAN9221_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
+ /* first lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
+ GPMC_SIZE_16M);
+
+ /* second lan chip */
+ enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000,
+ GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 1873523..33a92e4 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -138,7 +138,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/\
/* - SMSC911X_NRES*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | DIS | M4)) /*GPIO_65*/\
/*DSS*/\
MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
@@ -189,18 +189,18 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M0)) /*CAM_WEN*/\
MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
- MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
- MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
+ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | EN | M4)) /*GPIO_112*/\
+ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | EN | M4)) /*GPIO_113*/\
MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
/* - PEN_DOWN*/\
- MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\
+ MUX_VAL(CP(CSI2_DY1), (IEN | PTD | EN | M4)) /*GPIO_115*/\
/*Audio Interface */\
MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\
MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\
MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
/*Expansion card */\
- MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) /*MMC1_CLK*/\
MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
@@ -211,7 +211,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\
MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\
/*Wireless LAN */\
- MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\
MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
@@ -220,7 +220,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
- MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\
/*Bluetooth*/\
MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\
MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
@@ -301,7 +301,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
- MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\
+ MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\
@@ -387,5 +387,36 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+#define MUX_OVERO_SDIO2_DIRECT() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M0)) /*MMC2_DAT4*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M0)) /*MMC2_DAT5*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M0)) /*MMC2_DAT6*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M0)) /*MMC2_DAT7*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTD | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
+
+#define MUX_OVERO_SDIO2_TRANSCEIVER() \
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\
+ MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M0)) /*MMC2_CMD*/\
+ MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M0)) /*MMC2_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M0)) /*MMC2_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M0)) /*MMC2_DAT2*/\
+ MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M0)) /*MMC2_DAT3*/\
+ MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT0*/\
+ MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M1)) /*MMC2_DIR_DAT1*/\
+ MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M1)) /*MMC2_DIR_CMD*/\
+ MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M1)) /*MMC2_CLKIN*/\
+ MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) /*GPIO_126*/\
+ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) /*GPIO_127*/\
+ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) /*GPIO_128*/\
+ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) /*GPIO_129*/
#endif
generated by cgit v1.1 at 2024-11-02 11:45:12 +0000