1 files changed, 0 insertions, 130 deletions
diff --git a/board/omap3/zoom2/zoom2_serial.c b/board/omap3/zoom2/zoom2_serial.c
deleted file mode 100644
index a3d777d..0000000
--- a/board/omap3/zoom2/zoom2_serial.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * This file was adapted from cpu/mpc5xxx/serial.c
- *
- */
-
-#include <common.h>
-#include <serial.h>
-#include <ns16550.h>
-#include <asm/arch/cpu.h>
-#include "zoom2_serial.h"
-
-int quad_init_dev (unsigned long base)
-{
-	/*
-	 * The Quad UART is on the debug board.
-	 * Check if the debug board is attached before using the UART
-	 */
-	if (zoom2_debug_board_connected ()) {
-		NS16550_t com_port = (NS16550_t) base;
-		int baud_divisor = CONFIG_SYS_NS16550_CLK / 16 /
-			CONFIG_BAUDRATE;
-
-		/*
-		 * Zoom2 has a board specific initialization of its UART.
-		 * This generic initialization has been copied from
-		 * drivers/serial/ns16550.c. The macros have been expanded.
-		 *
-		 * Do the following instead of
-		 *
-		 * NS16550_init (com_port, clock_divisor);
-		 */
-		com_port->ier = 0x00;
-
-		/*
-		 * On Zoom2 board Set pre-scalar to 1
-		 * CLKSEL is GND => MCR[7] is 1 => preslr is 4
-		 * So change the prescl to 1
-		 */
-		com_port->lcr = 0xBF;
-		com_port->fcr |= 0x10;
-		com_port->mcr &= 0x7F;
-
-		/* This is generic ns16550.c setup */
-		com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
-		com_port->dll = 0;
-		com_port->dlm = 0;
-		com_port->lcr = UART_LCR_8N1;
-		com_port->mcr = UART_MCR_DTR | UART_MCR_RTS;
-		com_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR |
-			UART_FCR_TXSR;
-		com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
-		com_port->dll = baud_divisor & 0xff;
-		com_port->dlm = (baud_divisor >> 8) & 0xff;
-		com_port->lcr = UART_LCR_8N1;
-	}
-	/*
-	 * We have to lie here, otherwise the board init code will hang
-	 * on the check
-	 */
-	return 0;
-}
-
-void quad_putc_dev (unsigned long base, const char c)
-{
-	if (zoom2_debug_board_connected ()) {
-
-		if (c == '\n')
-			quad_putc_dev (base, '\r');
-
-		NS16550_putc ((NS16550_t) base, c);
-	}
-}
-
-void quad_puts_dev (unsigned long base, const char *s)
-{
-	if (zoom2_debug_board_connected ()) {
-		while ((s != NULL) && (*s != '\0'))
-			quad_putc_dev (base, *s++);
-	}
-}
-
-int quad_getc_dev (unsigned long base)
-{
-	if (zoom2_debug_board_connected ())
-		return NS16550_getc ((NS16550_t) base);
-	else
-		return 0;
-}
-
-int quad_tstc_dev (unsigned long base)
-{
-	if (zoom2_debug_board_connected ())
-		return NS16550_tstc ((NS16550_t) base);
-	else
-		return 0;
-}
-
-void quad_setbrg_dev (unsigned long base)
-{
-	if (zoom2_debug_board_connected ()) {
-
-		int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 /
-			CONFIG_BAUDRATE;
-
-		NS16550_reinit ((NS16550_t) base, clock_divisor);
-	}
-}
-
-QUAD_INIT (0)
-QUAD_INIT (1)
-QUAD_INIT (2)
-QUAD_INIT (3)