summaryrefslogtreecommitdiff
path: root/board/nvidia
diff options
context:
space:
mode:
Diffstat (limited to 'board/nvidia')
-rw-r--r--board/nvidia/common/board.c147
-rw-r--r--board/nvidia/common/board.h1
2 files changed, 148 insertions, 0 deletions
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 3d6c248..627e061 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -32,6 +32,10 @@
#include <asm/arch/uart.h>
#include "board.h"
+#ifdef CONFIG_TEGRA2_MMC
+#include <mmc.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
const struct tegra2_sysinfo sysinfo = {
@@ -171,6 +175,116 @@ static void pin_mux_uart(void)
}
/*
+ * Routine: clock_init_mmc
+ * Description: init the PLL and clocks for the SDMMC controllers
+ */
+static void clock_init_mmc(void)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ /* Do the SDMMC resets/clock enables */
+
+ /* Assert Reset to SDMMC4 */
+ reg = readl(&clkrst->crc_rst_dev_l);
+ reg |= SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 1 */
+ writel(reg, &clkrst->crc_rst_dev_l);
+
+ /* Enable clk to SDMMC4 */
+ reg = readl(&clkrst->crc_clk_out_enb_l);
+ reg |= CLK_ENB_SDMMC4; /* CLK_ENB_SDMMC4 = 1 */
+ writel(reg, &clkrst->crc_clk_out_enb_l);
+
+ /* Enable pllp_out0 to SDMMC4 */
+ reg = readl(&clkrst->crc_clk_src_sdmmc4);
+ reg &= 0x3FFFFF00; /* SDMMC4_CLK_SRC = 00, PLLP_OUT0 */
+ reg |= (10 << 1); /* n-1, 11-1 shl 1 */
+ writel(reg, &clkrst->crc_clk_src_sdmmc4);
+
+ /*
+ * As per the Tegra2 TRM, section 5.3.4:
+ * 'Wait 2 us for the clock to flush through the pipe/logic'
+ */
+ udelay(2);
+
+ /* De-assert reset to SDMMC4 */
+ reg = readl(&clkrst->crc_rst_dev_l);
+ reg &= ~SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 0 */
+ writel(reg, &clkrst->crc_rst_dev_l);
+
+ /* Assert Reset to SDMMC3 */
+ reg = readl(&clkrst->crc_rst_dev_u);
+ reg |= SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 1 */
+ writel(reg, &clkrst->crc_rst_dev_u);
+
+ /* Enable clk to SDMMC3 */
+ reg = readl(&clkrst->crc_clk_out_enb_u);
+ reg |= CLK_ENB_SDMMC3; /* CLK_ENB_SDMMC3 = 1 */
+ writel(reg, &clkrst->crc_clk_out_enb_u);
+
+ /* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */
+ reg = readl(&clkrst->crc_clk_src_sdmmc3);
+ reg &= 0x3FFFFF00; /* SDMMC3_CLK_SRC = 00, PLLP_OUT0 */
+ reg |= (10 << 1); /* n-1, 11-1 shl 1 */
+ writel(reg, &clkrst->crc_clk_src_sdmmc3);
+
+ /* wait for 2us */
+ udelay(2);
+
+ /* De-assert reset to SDMMC3 */
+ reg = readl(&clkrst->crc_rst_dev_u);
+ reg &= ~SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 0 */
+ writel(reg, &clkrst->crc_rst_dev_u);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+static void pin_mux_mmc(void)
+{
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 reg;
+
+ /* SDMMC4 */
+ /* config 2, x8 on 2nd set of pins */
+ reg = readl(&pmt->pmt_ctl_a);
+ reg |= (3 << 16); /* ATB_SEL [17:16] = 11 SDIO4 */
+ writel(reg, &pmt->pmt_ctl_a);
+ reg = readl(&pmt->pmt_ctl_b);
+ reg |= (3 << 0); /* GMA_SEL [1:0] = 11 SDIO4 */
+ writel(reg, &pmt->pmt_ctl_b);
+ reg = readl(&pmt->pmt_ctl_d);
+ reg |= (3 << 0); /* GME_SEL [1:0] = 11 SDIO4 */
+ writel(reg, &pmt->pmt_ctl_d);
+
+ reg = readl(&pmt->pmt_tri_a);
+ reg &= ~Z_ATB; /* Z_ATB = normal (0) */
+ reg &= ~Z_GMA; /* Z_GMA = normal (0) */
+ writel(reg, &pmt->pmt_tri_a);
+ reg = readl(&pmt->pmt_tri_b);
+ reg &= ~Z_GME; /* Z_GME = normal (0) */
+ writel(reg, &pmt->pmt_tri_b);
+
+ /* SDMMC3 */
+ /* SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
+ reg = readl(&pmt->pmt_ctl_d);
+ reg &= 0xFFFF03FF;
+ reg |= (2 << 10); /* SDB_SEL [11:10] = 01 SDIO3 */
+ reg |= (2 << 12); /* SDC_SEL [13:12] = 01 SDIO3 */
+ reg |= (2 << 14); /* SDD_SEL [15:14] = 01 SDIO3 */
+ writel(reg, &pmt->pmt_ctl_d);
+
+ reg = readl(&pmt->pmt_tri_b);
+ reg &= ~Z_SDC; /* Z_SDC = normal (0) */
+ reg &= ~Z_SDD; /* Z_SDD = normal (0) */
+ writel(reg, &pmt->pmt_tri_b);
+ reg = readl(&pmt->pmt_tri_d);
+ reg &= ~Z_SDB; /* Z_SDB = normal (0) */
+ writel(reg, &pmt->pmt_tri_d);
+}
+
+/*
* Routine: clock_init
* Description: Do individual peripheral clock reset/enables
*/
@@ -210,3 +324,36 @@ int board_init(void)
return 0;
}
+
+#ifdef CONFIG_TEGRA2_MMC
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+ debug("board_mmc_init called\n");
+ /* Enable clocks, muxes, etc. for SDMMC controllers */
+ clock_init_mmc();
+ pin_mux_mmc();
+
+ debug("board_mmc_init: init eMMC\n");
+ /* init dev 0, eMMC chip, with 4-bit bus */
+ tegra2_mmc_init(0, 4);
+
+ debug("board_mmc_init: init SD slot\n");
+ /* init dev 1, SD slot, with 4-bit bus */
+ tegra2_mmc_init(1, 4);
+
+ return 0;
+}
+
+/* this is a weak define that we are overriding */
+int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+ debug("board_mmc_getcd called\n");
+ /*
+ * Hard-code CD presence for now. Need to add GPIO inputs
+ * for Seaboard & Harmony (& Kaen/Aebl/Wario?)
+ */
+ *cd = 1;
+ return 0;
+}
+#endif
diff --git a/board/nvidia/common/board.h b/board/nvidia/common/board.h
index 350bc57..4334c02 100644
--- a/board/nvidia/common/board.h
+++ b/board/nvidia/common/board.h
@@ -29,5 +29,6 @@ void clock_init(void);
void pinmux_init(void);
void gpio_init(void);
void gpio_config_uart(void);
+int tegra2_mmc_init(int dev_index, int bus_width);
#endif /* BOARD_H */