summaryrefslogtreecommitdiff
path: root/board/netstal/hcu4
diff options
context:
space:
mode:
Diffstat (limited to 'board/netstal/hcu4')
-rw-r--r--board/netstal/hcu4/Makefile49
-rw-r--r--board/netstal/hcu4/README.txt59
-rw-r--r--board/netstal/hcu4/config.mk28
-rw-r--r--board/netstal/hcu4/hcu4.c400
-rw-r--r--board/netstal/hcu4/u-boot.lds140
5 files changed, 676 insertions, 0 deletions
diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile
new file mode 100644
index 0000000..d9825a5
--- /dev/null
+++ b/board/netstal/hcu4/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2007 Netstal Maschinen AG
+# Niklaus Giger (ng@netstal.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+vpath flash.c ../common
+COBJS = $(BOARD).o flash.o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/netstal/hcu4/README.txt b/board/netstal/hcu4/README.txt
new file mode 100644
index 0000000..1e9c64a
--- /dev/null
+++ b/board/netstal/hcu4/README.txt
@@ -0,0 +1,59 @@
+HCU4 Configuration Details
+
+Memory Bank 0 -- Flash chip
+---------------------------
+
+0xfff00000 - 0xffffffff
+
+The flash chip is really only 512Kbytes, but the high address bit of
+the 1Meg region is ignored, so the flash is replicated through the
+region. Thus, this is consistent with a flash base address 0xfff80000.
+
+The placement at the end is to be consistent with reset behavior,
+where the processor itself initially uses this bus to load the branch
+vector and start running.
+
+On-Chip Memory
+--------------
+
+0xf4000000 - 0xf4000fff
+
+The 405GPr includes a 4K on-chip memory that can be placed however
+software chooses. I choose to place the memory at this address, to
+keep it out of the cachable areas.
+
+
+Internal Peripherals
+--------------------
+
+0xef600300 - 0xef6008ff
+
+These are scattered various peripherals internal to the PPC405GPr
+chip.
+
+Chip-Select 2: Flash Memory
+---------------------------
+
+0x70000000
+
+Chip-Select 3: CAN Interface
+----------------------------
+0x7800000
+
+
+Chip-Select 4: IMC-bus standard
+-------------------------------
+
+Our IO-Bus (slow version)
+
+
+Chip-Select 5: IMC-bus fast (inactive)
+--------------------------------------
+
+Our IO-Bus (fast, but not yet use)
+
+
+Memory Bank 1 -- SDRAM
+-------------------------------------
+
+0x00000000 - 0x1ffffff # Default 32 MB
diff --git a/board/netstal/hcu4/config.mk b/board/netstal/hcu4/config.mk
new file mode 100644
index 0000000..376609a
--- /dev/null
+++ b/board/netstal/hcu4/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2005 Netstal Maschinen AG
+# Niklaus Giger (ng@netstal.com)
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Netstal Maschinen AG: HCU4 boards
+#
+
+TEXT_BASE = 0xFFFa0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG -g
+endif
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c
new file mode 100644
index 0000000..2b95604
--- /dev/null
+++ b/board/netstal/hcu4/hcu4.c
@@ -0,0 +1,400 @@
+/*
+ *(C) Copyright 2005-2007 Netstal Maschinen AG
+ * Niklaus Giger (Niklaus.Giger@netstal.com)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm-ppc/u-boot.h>
+#include "../common/nm_bsp.c"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
+
+#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */
+
+#define DO_UGLY_SDRAM_WORKAROUND
+
+enum {
+ /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */
+ HW_GENERATION_HCU2 = 0x10,
+ HW_GENERATION_HCU3 = 0x10,
+ HW_GENERATION_HCU4 = 0x20,
+ HW_GENERATION_MCU = 0x08,
+ HW_GENERATION_MCU20 = 0x0a,
+ HW_GENERATION_MCU25 = 0x09,
+};
+
+void sysLedSet(u32 value);
+long int spd_sdram(int(read_spd)(uint addr));
+
+#ifdef CONFIG_SPD_EEPROM
+#define DEBUG
+#endif
+
+#if defined(DEBUG)
+void show_sdram_registers(void);
+#endif
+
+/*
+ * This function is run very early, out of flash, and before devices are
+ * initialized. It is called by lib_ppc/board.c:board_init_f by virtue
+ * of being in the init_sequence array.
+ *
+ * The SDRAM has been initialized already -- start.S:start called
+ * init.S:init_sdram early on -- but it is not yet being used for
+ * anything, not even stack. So be careful.
+ */
+
+#define CPC0_CR0 0xb1 /* Chip control register 0 */
+#define CPC0_CR1 0xb2 /* Chip control register 1 */
+/* Attention: If you want 1 microsecs times from the external oscillator
+ * use 0x00804051. But this causes problems with u-boot and linux!
+ */
+#define CPC0_CR1_VALUE 0x00004051
+#define CPC0_ECR 0xaa /* Edge condition register */
+#define EBC0_CFG 0x23 /* External Peripheral Control Register */
+#define CPC0_EIRR 0xb6 /* External Interrupt Register */
+
+
+int board_early_init_f (void)
+{
+ /*-------------------------------------------------------------------+
+ | Interrupt controller setup for the HCU4 board.
+ | Note: IRQ 0-15 405GP internally generated; high; level sensitive
+ | IRQ 16 405GP internally generated; low; level sensitive
+ | IRQ 17-24 RESERVED/UNUSED
+ | IRQ 31 (EXT IRQ 6) (unused)
+ +-------------------------------------------------------------------*/
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
+ mtdcr(CPC0_ECR, 0x60606000);
+ mtdcr(CPC0_EIRR, 0x7c000000);
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_PRE_INIT
+int board_pre_init (void)
+{
+ return board_early_init_f ();
+}
+#endif
+
+int checkboard (void)
+{
+ unsigned int j;
+ u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER;
+ u16 generation = *boardVersReg & 0xf0;
+ u16 index = *boardVersReg & 0x0f;
+
+ /* Force /RTS to active. The board it not wired quite
+ correctly to use cts/rtc flow control, so just force the
+ /RST active and forget about it. */
+ writeb (readb (0xef600404) | 0x03, 0xef600404);
+ printf ("\nNetstal Maschinen AG ");
+ if (generation == HW_GENERATION_HCU3)
+ printf ("HCU3: index %d\n\n", index);
+ else if (generation == HW_GENERATION_HCU4)
+ printf ("HCU4: index %d\n\n", index);
+ /* GPIO here noch nicht richtig initialisert !!! */
+ sysLedSet(0);
+ for (j = 0; j < 7; j++) {
+ sysLedSet(1 << j);
+ udelay(50 * 1000);
+ }
+
+ return 0;
+}
+
+u32 sysLedGet(void)
+{
+ return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff;
+}
+
+void sysLedSet(u32 value /* value to place in LEDs */)
+{
+ u32 tmp = ~value;
+ u32 *ledReg;
+
+ tmp = (tmp << 23) | 0x7FFFFF;
+ ledReg = (u32 *)GPIO0_OR;
+ *ledReg = tmp;
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram or initdram
+ * used for HCUx
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+#if defined(DEBUG)
+void show_sdram_registers(void)
+{
+ u32 value;
+
+ printf ("SDRAM Controller Registers --\n");
+ mfsdram(mem_mcopt1, value);
+ printf (" SDRAM0_CFG : 0x%08x\n", value);
+ mfsdram(mem_status, value);
+ printf (" SDRAM0_STATUS: 0x%08x\n", value);
+ mfsdram(mem_mb0cf, value);
+ printf (" SDRAM0_B0CR : 0x%08x\n", value);
+ mfsdram(mem_mb1cf, value);
+ printf (" SDRAM0_B1CR : 0x%08x\n", value);
+ mfsdram(mem_sdtr1, value);
+ printf (" SDRAM0_TR : 0x%08x\n", value);
+ mfsdram(mem_rtr, value);
+ printf (" SDRAM0_RTR : 0x%08x\n", value);
+}
+#endif
+
+/*
+ * this is even after checkboard. It returns the size of the SDRAM
+ * that we have installed. This function is called by board_init_f
+ * in lib_ppc/board.c to initialize the memory and return what I
+ * found. These are default value, which will be overridden later.
+ */
+
+long int fixed_hcu4_sdram (int board_type)
+{
+#ifdef DEBUG
+ printf (__FUNCTION__);
+#endif
+ /* disable memory controller */
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, 0x00000000);
+
+ udelay (500);
+
+ /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+ mtdcr (memcfga, mem_besra);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+ mtdcr (memcfga, mem_besrb);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Clear SDRAM0_ECCCFG (disable ECC) */
+ mtdcr (memcfga, mem_ecccf);
+ mtdcr (memcfgd, 0x00000000);
+
+ /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+ mtdcr (memcfga, mem_eccerr);
+ mtdcr (memcfgd, 0xffffffff);
+
+ /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2
+ * TODO ngngng
+ */
+ mtdcr (memcfga, mem_sdtr1);
+ mtdcr (memcfgd, 0x008a4015);
+
+ /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1
+ * TODO ngngng
+ */
+ mtdcr (memcfga, mem_mb0cf);
+ mtdcr (memcfgd, 0x00062001);
+
+ /* refresh timer = 0x400 */
+ mtdcr (memcfga, mem_rtr);
+ mtdcr (memcfgd, 0x04000000);
+
+ /* Power management idle timer set to the default. */
+ mtdcr (memcfga, mem_pmit);
+ mtdcr (memcfgd, 0x07c00000);
+
+ udelay (500);
+
+ /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, 0x90800000);
+
+#ifdef DEBUG
+ printf ("%s: done\n", __FUNCTION__);
+#endif
+ return SDRAM_LEN;
+}
+
+/*---------------------------------------------------------------------------+
+ * getSerialNr
+ *---------------------------------------------------------------------------*/
+static u32 getSerialNr(void)
+{
+ u32 *serial = (u32 *)CFG_FLASH_BASE;
+
+ if (*serial == 0xffffffff)
+ return get_ticks();
+
+ return *serial;
+}
+
+
+/*---------------------------------------------------------------------------+
+ * misc_init_r.
+ *---------------------------------------------------------------------------*/
+
+int misc_init_r(void)
+{
+ char *s = getenv("ethaddr");
+ char *e;
+ int i;
+ u32 serial = getSerialNr();
+
+ for (i = 0; i < 6; ++i) {
+ gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+
+ if (gd->bd->bi_enetaddr[3] == 0 &&
+ gd->bd->bi_enetaddr[4] == 0 &&
+ gd->bd->bi_enetaddr[5] == 0) {
+ char ethaddr[22];
+ /* [0..3] Must be in sync with CONFIG_ETHADDR */
+ gd->bd->bi_enetaddr[0] = 0x00;
+ gd->bd->bi_enetaddr[1] = 0x60;
+ gd->bd->bi_enetaddr[2] = 0x13;
+ gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff;
+ gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff;
+ gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff;
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0",
+ gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1],
+ gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3],
+ gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ;
+ printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__,
+ ethaddr, serial);
+ setenv ("ethaddr", ethaddr);
+ }
+ return 0;
+}
+
+#ifdef DO_UGLY_SDRAM_WORKAROUND
+#include "i2c.h"
+
+void set_spd_default_value(unsigned int spd_addr,uchar def_val)
+{
+ uchar value;
+ int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ;
+
+ if (res == 0 && value == 0xff) {
+ res = i2c_write(SPD_EEPROM_ADDRESS,
+ spd_addr, 1, &def_val, 1) ;
+#ifdef DEBUG
+ printf("%s: Setting spd offset %3d to %3d res %d\n",
+ __FUNCTION__, spd_addr, def_val, res);
+#endif
+ }
+}
+#endif
+
+long int initdram(int board_type)
+{
+ long dram_size = 0;
+
+#if !defined(CONFIG_SPD_EEPROM)
+ dram_size = fixed_hcu4_sdram();
+#else
+#ifdef DO_UGLY_SDRAM_WORKAROUND
+ /* Workaround if you have no working I2C-EEPROM-SPD-configuration */
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ set_spd_default_value(2, 4); /* SDRAM Type */
+ set_spd_default_value(7, 0); /* module width, high byte */
+ set_spd_default_value(12, 1); /* Refresh or 0x81 */
+
+ /* Only correct for HCU3 with 32 MB RAM*/
+ /* Number of bytes used by module manufacturer */
+ set_spd_default_value( 0, 128);
+ set_spd_default_value( 1, 11 ); /* Total SPD memory size */
+ set_spd_default_value( 2, 4 ); /* Memory type */
+ set_spd_default_value( 3, 12 ); /* Number of row address bits */
+ set_spd_default_value( 4, 9 ); /* Number of column address bits */
+ set_spd_default_value( 5, 1 ); /* Number of module rows */
+ set_spd_default_value( 6, 32 ); /* Module data width, LSB */
+ set_spd_default_value( 7, 0 ); /* Module data width, MSB */
+ set_spd_default_value( 8, 1 ); /* Module interface signal levels */
+ /* SDRAM cycle time for highest CL (Tclk) */
+ set_spd_default_value( 9, 112);
+ /* SDRAM access time from clock for highest CL (Tac) */
+ set_spd_default_value(10, 84 );
+ set_spd_default_value(11, 2 ); /* Module configuration type */
+ set_spd_default_value(12, 128); /* Refresh rate/type */
+ set_spd_default_value(13, 16 ); /* Primary SDRAM width */
+ set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */
+ /* SDRAM device attributes, min clock delay for back to back */
+ /*random column addresses (Tccd) */
+ set_spd_default_value(15, 1 );
+ /* SDRAM device attributes, burst lengths supported */
+ set_spd_default_value(16, 143);
+ /* SDRAM device attributes, number of banks on SDRAM device */
+ set_spd_default_value(17, 4 );
+ /* SDRAM device attributes, CAS latency */
+ set_spd_default_value(18, 6 );
+ /* SDRAM device attributes, CS latency */
+ set_spd_default_value(19, 1 );
+ /* SDRAM device attributes, WE latency */
+ set_spd_default_value(20, 1 );
+ set_spd_default_value(21, 0 ); /* SDRAM module attributes */
+ /* SDRAM device attributes, general */
+ set_spd_default_value(22, 14 );
+ /* SDRAM cycle time for 2nd highest CL (Tclk) */
+ set_spd_default_value(23, 117);
+ /* SDRAM access time from clock for2nd highest CL (Tac) */
+ set_spd_default_value(24, 84 );
+ /* SDRAM cycle time for 3rd highest CL (Tclk) */
+ set_spd_default_value(25, 0 );
+ /* SDRAM access time from clock for3rd highest CL (Tac) */
+ set_spd_default_value(26, 0 );
+ set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */
+ /* Minimum row active to row active delay (Trrd) */
+ set_spd_default_value(28, 14 );
+ set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */
+ set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */
+ set_spd_default_value(31, 8 ); /* Module bank density */
+ /* Command and Address signal input setup time */
+ set_spd_default_value(32, 21 );
+ /* Command and Address signal input hold time */
+ set_spd_default_value(33, 8 );
+ set_spd_default_value(34, 21 ); /* Data signal input setup time */
+ set_spd_default_value(35, 8 ); /* Data signal input hold time */
+#endif /* DO_UGLY_SDRAM_WORKAROUND */
+ dram_size = spd_sdram(0);
+#endif
+
+#ifdef DEBUG
+ show_sdram_registers();
+#endif
+
+#if defined(CFG_DRAM_TEST)
+ bcu4_testdram(dram_size);
+ printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024));
+#endif
+
+ return dram_size;
+}
diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds
new file mode 100644
index 0000000..b6e28f8
--- /dev/null
+++ b/board/netstal/hcu4/u-boot.lds
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text : {
+ /* The start.o file includes the initial jump vector that
+ must be located in the beginning. It is the basic run-
+ time function that calls all other functions. */
+ cpu/ppc4xx/start.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}