diff options
Diffstat (limited to 'board/nc650/nand.c')
| -rw-r--r-- | board/nc650/nand.c | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/board/nc650/nand.c b/board/nc650/nand.c new file mode 100644 index 0000000..de54386 --- /dev/null +++ b/board/nc650/nand.c @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2006 Detlev Zundel, dzu@denx.de + * (C) Copyright 2006 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> + +#if defined(CONFIG_IDS852_REV1) +/* + * hardware specific access to control-lines + */ +static void nc650_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + + switch(cmd) { + case NAND_CTL_SETCLE: + this->IO_ADDR_W += 2; + break; + case NAND_CTL_CLRCLE: + this->IO_ADDR_W -= 2; + break; + case NAND_CTL_SETALE: + this->IO_ADDR_W += 1; + break; + case NAND_CTL_CLRALE: + this->IO_ADDR_W -= 1; + break; + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + /* nop */ + break; + } +} +#elif defined(CONFIG_IDS852_REV2) +/* + * hardware specific access to control-lines + */ +static void nc650_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + + switch(cmd) { + case NAND_CTL_SETCLE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0; + break; + case NAND_CTL_CLRCLE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; + break; + case NAND_CTL_SETALE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0; + break; + case NAND_CTL_CLRALE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; + break; + case NAND_CTL_SETNCE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; + break; + case NAND_CTL_CLRNCE: + *(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0; + break; + } +} +#else +#error Unknown IDS852 module revision +#endif + +/* + * Board-specific NAND initialization. The following members of the + * argument are board-specific (per include/linux/mtd/nand.h): + * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device + * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device + * - hwcontrol: hardwarespecific function for accesing control-lines + * - dev_ready: hardwarespecific function for accesing device ready/busy line + * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must + * only be provided if a hardware ECC is available + * - eccmode: mode of ecc, see defines + * - chip_delay: chip dependent delay for transfering data from array to + * read regs (tR) + * - options: various chip options. They can partly be set to inform + * nand_scan about special functionality. See the defines for further + * explanation + * Members with a "?" were not set in the merged testing-NAND branch, + * so they are not set here either. + */ +void board_nand_init(struct nand_chip *nand) +{ + + nand->hwcontrol = nc650_hwcontrol; + nand->eccmode = NAND_ECC_SOFT; + nand->chip_delay = 12; +/* nand->options = NAND_SAMSUNG_LP_OPTIONS;*/ +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ |