1 files changed, 0 insertions, 94 deletions
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
deleted file mode 100644
index fe26b73..0000000
--- a/board/mx31ads/mx31ads.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/mx31.h>
-#include <asm/arch/mx31-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	int i;
-#if 0
-	/* CS0: Nor Flash */
-	/*
-	 * These are values from the RedBoot sources by Freescale. However,
-	 * under U-Boot with this configuration 32-bit accesses don't work,
-	 * lower 16 bits of data are read twice for each 32-bit read.
-	 */
-	__REG(CSCR_U(0)) = 0x23524E80;
-	__REG(CSCR_L(0)) = 0x10000D03; /* WRAP bit (1) is suspicious here, but
-					* disabling it doesn't help either */
-	__REG(CSCR_A(0)) = 0x00720900;
-#endif
-
-	/* setup pins for UART1 */
-	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
-	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
-	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
-
-	/* PBC setup */
-	/* Enable UART transceivers also reset the Ethernet/external UART */
-	readw(CS4_BASE + 4);
-
-	writew(0x8023, CS4_BASE + 4);
-
-	/* RedBoot also has an empty loop with 100000 iterations here -
-	 * clock doesn't run yet */
-	for (i = 0; i < 100000; i++)
-		;
-
-	/* Clear the reset, toggle the LEDs */
-	writew(0xDF, CS4_BASE + 6);
-
-	/* clock still doesn't run */
-	for (i = 0; i < 100000; i++)
-		;
-
-	/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
-	readb(CS4_BASE + 8);
-	readb(CS4_BASE + 7);
-	readb(CS4_BASE + 8);
-	readb(CS4_BASE + 7);
-
-	gd->bd->bi_arch_number = 447;		/* board id for linux */
-	gd->bd->bi_boot_params = 0x80000100;	/* adress of boot parameters */
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("Board: MX31ADS\n");
-	return 0;
-}