diff options
Diffstat (limited to 'board/mpl')
| -rw-r--r-- | board/mpl/vcma9/flash.c | 623 |
1 files changed, 305 insertions, 318 deletions
diff --git a/board/mpl/vcma9/flash.c b/board/mpl/vcma9/flash.c index 35cf260..ccfe176 100644 --- a/board/mpl/vcma9/flash.c +++ b/board/mpl/vcma9/flash.c @@ -24,13 +24,13 @@ #include <common.h> -ulong myflush(void); +ulong myflush (void); #define FLASH_BANK_SIZE PHYS_FLASH_SIZE -#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ +#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define CMD_READ_ARRAY 0x000000F0 @@ -47,7 +47,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define BIT_ERASE_DONE 0x00000080 #define BIT_RDY_MASK 0x00000080 #define BIT_PROGRAM_ERROR 0x00000020 -#define BIT_TIMEOUT 0x80000000 /* our flag */ +#define BIT_TIMEOUT 0x80000000 /* our flag */ #define READY 1 #define ERR 2 @@ -56,390 +56,377 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- */ -ulong flash_init(void) +ulong flash_init (void) { - int i, j; - ulong size = 0; + int i, j; + ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) - { - ulong flashbase = 0; - flash_info[i].flash_id = + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = #if defined(CONFIG_AMD_LV400) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV400B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV400B & FLASH_TYPEMASK); #elif defined(CONFIG_AMD_LV800) - (AMD_MANUFACT & FLASH_VENDMASK) | - (AMD_ID_LV800B & FLASH_TYPEMASK); + (AMD_MANUFACT & FLASH_VENDMASK) | + (AMD_ID_LV800B & FLASH_TYPEMASK); #else #error "Unknown flash configured" #endif - flash_info[i].size = FLASH_BANK_SIZE; - flash_info[i].sector_count = CFG_MAX_FLASH_SECT; - memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); - if (i == 0) - flashbase = PHYS_FLASH_1; - else - panic("configured too many flash banks!\n"); - for (j = 0; j < flash_info[i].sector_count; j++) - { - if (j <= 3) - { - /* 1st one is 16 KB */ - if (j == 0) - { - flash_info[i].start[j] = flashbase + 0; - } - - /* 2nd and 3rd are both 8 KB */ - if ((j == 1) || (j == 2)) - { - flash_info[i].start[j] = flashbase + 0x4000 + (j-1)*0x2000; - } - - /* 4th 32 KB */ - if (j == 3) - { - flash_info[i].start[j] = flashbase + 0x8000; + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i == 0) + flashbase = PHYS_FLASH_1; + else + panic ("configured too many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) { + if (j <= 3) { + /* 1st one is 16 KB */ + if (j == 0) { + flash_info[i].start[j] = + flashbase + 0; + } + + /* 2nd and 3rd are both 8 KB */ + if ((j == 1) || (j == 2)) { + flash_info[i].start[j] = + flashbase + 0x4000 + (j - + 1) * + 0x2000; + } + + /* 4th 32 KB */ + if (j == 3) { + flash_info[i].start[j] = + flashbase + 0x8000; + } + } else { + flash_info[i].start[j] = + flashbase + (j - 3) * MAIN_SECT_SIZE; + } } - } - else - { - flash_info[i].start[j] = flashbase + (j - 3)*MAIN_SECT_SIZE; - } + size += flash_info[i].size; } - size += flash_info[i].size; - } - flash_protect(FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR + CFG_ENV_SIZE - 1, - &flash_info[0]); + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); - return size; + return size; } /*----------------------------------------------------------------------- */ -void flash_print_info (flash_info_t *info) +void flash_print_info (flash_info_t * info) { - int i; - - switch (info->flash_id & FLASH_VENDMASK) - { - case (AMD_MANUFACT & FLASH_VENDMASK): - puts("AMD: "); - break; - default: - puts("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case (AMD_ID_LV400B & FLASH_TYPEMASK): - puts("1x Amd29LV400BB (4Mbit)\n"); - break; - case (AMD_ID_LV800B & FLASH_TYPEMASK): - puts("1x Amd29LV800BB (8Mbit)\n"); - break; - default: - puts("Unknown Chip Type\n"); - goto Done; - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - puts(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; i++) - { - if ((i % 5) == 0) - { - puts("\n "); + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (AMD_MANUFACT & FLASH_VENDMASK): + puts ("AMD: "); + break; + default: + puts ("Unknown Vendor "); + break; } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - puts("\n"); -Done: + switch (info->flash_id & FLASH_TYPEMASK) { + case (AMD_ID_LV400B & FLASH_TYPEMASK): + puts ("1x Amd29LV400BB (4Mbit)\n"); + break; + case (AMD_ID_LV800B & FLASH_TYPEMASK): + puts ("1x Amd29LV800BB (8Mbit)\n"); + break; + default: + puts ("Unknown Chip Type\n"); + goto Done; + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + puts (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + puts ("\n "); + } + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + puts ("\n"); + +Done: ; } /*----------------------------------------------------------------------- */ -int flash_erase (flash_info_t *info, int s_first, int s_last) +int flash_erase (flash_info_t * info, int s_first, int s_last) { - ushort result; - int iflag, cflag, prot, sect; - int rc = ERR_OK; - int chip; - - /* first look for protection bits */ + ushort result; + int iflag, cflag, prot, sect; + int rc = ERR_OK; + int chip; - if (info->flash_id == FLASH_UNKNOWN) - return ERR_UNKNOWN_FLASH_TYPE; + /* first look for protection bits */ - if ((s_first < 0) || (s_first > s_last)) { - return ERR_INVAL; - } + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; - if ((info->flash_id & FLASH_VENDMASK) != - (AMD_MANUFACT & FLASH_VENDMASK)) { - return ERR_UNKNOWN_FLASH_VENDOR; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; } - } - if (prot) - return ERR_PROTECTED; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && !ctrlc(); sect++) - { - printf("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - if (info->protect[sect] == 0) - { /* not protected */ - vu_short *addr = (vu_short *)(info->start[sect]); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - *addr = CMD_ERASE_CONFIRM; - - /* wait until flash is ready */ - chip = 0; - do - { - result = *addr; + if ((info->flash_id & FLASH_VENDMASK) != + (AMD_MANUFACT & FLASH_VENDMASK)) { + return ERR_UNKNOWN_FLASH_VENDOR; + } - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - chip = TMO; - break; + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; } - - if (!chip && (result & 0xFFFF) & BIT_ERASE_DONE) - chip = READY; - - if (!chip && (result & 0xFFFF) & BIT_PROGRAM_ERROR) - chip = ERR; - - } while (!chip); - - MEM_FLASH_ADDR1 = CMD_READ_ARRAY; - - if (chip == ERR) - { - rc = ERR_PROG_ERROR; - goto outahere; - } - if (chip == TMO) - { - rc = ERR_TIMOUT; - goto outahere; - } - - puts("ok.\n"); } - else /* it was protected */ - { - puts("protected!\n"); + if (prot) + return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + if (info->protect[sect] == 0) { /* not protected */ + vu_short *addr = (vu_short *) (info->start[sect]); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + *addr = CMD_ERASE_CONFIRM; + + /* wait until flash is ready */ + chip = 0; + + do { + result = *addr; + + /* check timeout */ + if (get_timer_masked () > + CFG_FLASH_ERASE_TOUT) { + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + chip = TMO; + break; + } + + if (!chip + && (result & 0xFFFF) & BIT_ERASE_DONE) + chip = READY; + + if (!chip + && (result & 0xFFFF) & BIT_PROGRAM_ERROR) + chip = ERR; + + } while (!chip); + + MEM_FLASH_ADDR1 = CMD_READ_ARRAY; + + if (chip == ERR) { + rc = ERR_PROG_ERROR; + goto outahere; + } + if (chip == TMO) { + rc = ERR_TIMOUT; + goto outahere; + } + + puts ("ok.\n"); + } else { /* it was protected */ + + puts ("protected!\n"); + } } - } - if (ctrlc()) - puts("User Interrupt!\n"); + if (ctrlc ()) + puts ("User Interrupt!\n"); -outahere: - /* allow flash to settle - wait 10 ms */ - udelay_masked(10000); + outahere: + /* allow flash to settle - wait 10 ms */ + udelay_masked (10000); - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ -volatile static int write_hword (flash_info_t *info, ulong dest, ushort data) +volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) { - vu_short *addr = (vu_short *)dest; - ushort result; - int rc = ERR_OK; - int cflag, iflag; - int chip; - - /* - * Check if Flash is (sufficiently) erased - */ - result = *addr; - if ((result & data) != data) - return ERR_NOT_ERASED; - - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status(); - icache_disable(); - iflag = disable_interrupts(); - - MEM_FLASH_ADDR1 = CMD_UNLOCK1; - MEM_FLASH_ADDR2 = CMD_UNLOCK2; - MEM_FLASH_ADDR1 = CMD_PROGRAM; - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - - /* wait until flash is ready */ - chip = 0; - do - { + vu_short *addr = (vu_short *) dest; + ushort result; + int rc = ERR_OK; + int cflag, iflag; + int chip; + + /* + * Check if Flash is (sufficiently) erased + */ result = *addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + cflag = icache_status (); + icache_disable (); + iflag = disable_interrupts (); + + MEM_FLASH_ADDR1 = CMD_UNLOCK1; + MEM_FLASH_ADDR2 = CMD_UNLOCK2; + MEM_FLASH_ADDR1 = CMD_PROGRAM; + *addr = data; - /* check timeout */ - if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) - { - chip = ERR | TMO; - break; - } - if (!chip && ((result & 0x80) == (data & 0x80))) - chip = READY; + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); - if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) - { + /* wait until flash is ready */ + chip = 0; + do { result = *addr; - if ((result & 0x80) == (data & 0x80)) + /* check timeout */ + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + chip = ERR | TMO; + break; + } + if (!chip && ((result & 0x80) == (data & 0x80))) chip = READY; - else - chip = ERR; - } - } while (!chip); + if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { + result = *addr; + + if ((result & 0x80) == (data & 0x80)) + chip = READY; + else + chip = ERR; + } + + } while (!chip); - *addr = CMD_READ_ARRAY; + *addr = CMD_READ_ARRAY; - if (chip == ERR || *addr != data) - rc = ERR_PROG_ERROR; + if (chip == ERR || *addr != data) + rc = ERR_PROG_ERROR; - if (iflag) - enable_interrupts(); + if (iflag) + enable_interrupts (); - if (cflag) - icache_enable(); + if (cflag) + icache_enable (); - return rc; + return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { - ulong cp, wp; - int l; - int i, rc; - ushort data; - - wp = (addr & ~1); /* get lower word aligned address */ + ulong cp, wp; + int l; + int i, rc; + ushort data; + + wp = (addr & ~1); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } + for (; i < 2 && cnt > 0; ++i) { + data = (data >> 8) | (*src++ << 8); + --cnt; + ++cp; + } + for (; cnt == 0 && i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); + } - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + wp += 2; } - for (; i<2 && cnt>0; ++i) { - data = (data >> 8) | (*src++ << 8); - --cnt; - ++cp; + + /* + * handle word aligned part + */ + while (cnt >= 2) { + data = *((vu_short *) src); + if ((rc = write_hword (info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; } - for (; cnt==0 && i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); + + if (cnt == 0) { + return ERR_OK; } - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; } - wp += 2; - } - - /* - * handle word aligned part - */ - while (cnt >= 2) { - data = *((vu_short*)src); - if ((rc = write_hword(info, wp, data)) != 0) { - return (rc); + for (; i < 2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *) cp << 8); } - src += 2; - wp += 2; - cnt -= 2; - } - - if (cnt == 0) { - return ERR_OK; - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { - data = (data >> 8) | (*src++ << 8); - --cnt; - } - for (; i<2; ++i, ++cp) { - data = (data >> 8) | (*(uchar *)cp << 8); - } - - return write_hword(info, wp, data); + + return write_hword (info, wp, data); } |