diff options
Diffstat (limited to 'board/mpl')
| -rw-r--r-- | board/mpl/vcma9/vcma9.c | 41 |
1 files changed, 21 insertions, 20 deletions
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index eaeec82..978e6fd 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -78,42 +78,43 @@ int board_init(void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x002AAAAA; - gpio->GPBUP = 0x000002BF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x000037F7; - gpio->GPFCON = 0x00000000; - gpio->GPFUP = 0x00000000; - gpio->GPGCON = 0xFFEAFF5A; - gpio->GPGUP = 0x0000F0DC; - gpio->GPHCON = 0x0028AAAA; - gpio->GPHUP = 0x00000656; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x002AAAAA; + gpio->gpbup = 0x000002BF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x000037F7; + gpio->gpfcon = 0x00000000; + gpio->gpfup = 0x00000000; + gpio->gpgcon = 0xFFEAFF5A; + gpio->gpgup = 0x0000F0DC; + gpio->gphcon = 0x0028AAAA; + gpio->gphup = 0x00000656; /* setup correct IRQ modes for NIC */ - gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */ + /* rising edge mode */ + gpio->extint2 = (gpio->extint2 & ~(7<<8)) | (4<<8); /* select USB port 2 to be host or device (fix to host for now) */ - gpio->MISCCR |= 0x08; + gpio->misccr |= 0x08; /* init serial */ gd->baudrate = CONFIG_BAUDRATE; |