diff options
Diffstat (limited to 'board/mpc8568mds')
| -rw-r--r-- | board/mpc8568mds/Makefile | 58 | ||||
| -rw-r--r-- | board/mpc8568mds/bcsr.c | 56 | ||||
| -rw-r--r-- | board/mpc8568mds/bcsr.h | 100 | ||||
| -rw-r--r-- | board/mpc8568mds/config.mk | 30 | ||||
| -rw-r--r-- | board/mpc8568mds/ft_board.c | 45 | ||||
| -rw-r--r-- | board/mpc8568mds/init.S | 246 | ||||
| -rw-r--r-- | board/mpc8568mds/mpc8568mds.c | 399 | ||||
| -rw-r--r-- | board/mpc8568mds/u-boot.lds | 152 |
8 files changed, 0 insertions, 1086 deletions
diff --git a/board/mpc8568mds/Makefile b/board/mpc8568mds/Makefile deleted file mode 100644 index a799aa4..0000000 --- a/board/mpc8568mds/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# Copyright 2004-2007 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - -LIB = $(obj)lib$(BOARD).a - -COBJS := $(BOARD).o \ - bcsr.o \ - ft_board.o - -SOBJS := init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c deleted file mode 100644 index aae0f98..0000000 --- a/board/mpc8568mds/bcsr.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include "bcsr.h" - -void enable_8568mds_duart() -{ - volatile uint* duart_mux = (uint *)(CFG_CCSRBAR + 0xe0060); - volatile uint* devices = (uint *)(CFG_CCSRBAR + 0xe0070); - volatile u8 *bcsr = (u8 *)(CFG_BCSR); - - *duart_mux = 0x80000000; /* Set the mux to Duart on PMUXCR */ - *devices = 0; /* Enable all peripheral devices */ - bcsr[5] |= 0x01; /* Enable Duart in BCSR*/ -} - -void enable_8568mds_flash_write() -{ - volatile u8 *bcsr = (u8 *)(CFG_BCSR); - - bcsr[9] |= 0x01; -} - -void disable_8568mds_flash_write() -{ - volatile u8 *bcsr = (u8 *)(CFG_BCSR); - - bcsr[9] &= ~(0x01); -} - -void enable_8568mds_qe_mdio() -{ - u8 *bcsr = (u8 *)(CFG_BCSR); - - bcsr[7] |= 0x01; -} diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h deleted file mode 100644 index aefd9bf..0000000 --- a/board/mpc8568mds/bcsr.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __BCSR_H_ -#define __BCSR_H_ - -#include <common.h> - -/* BCSR Bit definitions - * BCSR 0 * - 0:3 ccb sys pll - 4:6 cfg core pll - 7 cfg boot seq - - * BCSR 1 * - 0:2 cfg rom lock - 3:5 cfg host agent - 6 PCI IO - 7 cfg RIO size - - * BCSR 2 * - 0:4 QE PLL - 5 QE clock - 6 cfg PCI arbiter - - * BCSR 3 * - 0 TSEC1 reduce - 1 TSEC2 reduce - 2:3 TSEC1 protocol - 4:5 TSEC2 protocol - 6 PHY1 slave - 7 PHY2 slave - - * BCSR 4 * - 4 clock enable - 5 boot EPROM - 6 GETH transactive reset - 7 BRD write potect - - * BCSR 5 * - 1:3 Leds 1-3 - 4 UPC1 enable - 5 UPC2 enable - 6 UPC2 pos - 7 RS232 enable - - * BCSR 6 * - 0 CFG ver 0 - 1 CFG ver 1 - 6 Register config led - 7 Power on reset - - * BCSR 7 * - 2 board host mode indication - 5 enable TSEC1 PHY - 6 enable TSEC2 PHY - - * BCSR 8 * - 0 UCC GETH1 enable - 1 UCC GMII enable - 3 UCC TBI enable - 5 UCC MII enable - 7 Real time clock reset - - * BCSR 9 * - 0 UCC2 GETH enable - 1 UCC2 GMII enable - 3 UCC2 TBI enable - 5 UCC2 MII enable - 6 Ready only - indicate flash ready after burning - 7 Flash write protect -*/ - -/*BCSR Utils functions*/ - -void enable_8568mds_duart(void); -void enable_8568mds_flash_write(void); -void disable_8568mds_flash_write(void); -void enable_8568mds_qe_mdio(void); - -#endif /* __BCSR_H_ */ diff --git a/board/mpc8568mds/config.mk b/board/mpc8568mds/config.mk deleted file mode 100644 index 021522c..0000000 --- a/board/mpc8568mds/config.mk +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2007 Freescale Semiconductor. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -# -# mpc8568mds board -# -TEXT_BASE = 0xfff80000 - -PLATFORM_CPPFLAGS += -DCONFIG_E500=1 -PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 -PLATFORM_CPPFLAGS += -DCONFIG_MPC8568=1 diff --git a/board/mpc8568mds/ft_board.c b/board/mpc8568mds/ft_board.c deleted file mode 100644 index 36815cc..0000000 --- a/board/mpc8568mds/ft_board.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#include <ft_build.h> - -extern void ft_cpu_setup(void *blob, bd_t *bd); - -#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - u32 *p; - int len; -#ifdef CONFIG_PCI - ft_pci_setup(blob, bd); -#endif - ft_cpu_setup(blob, bd); - p = ft_get_prop(blob, "/memory/reg", &len); - if (p != NULL) { - *p++ = cpu_to_be32(bd->bi_memstart); - *p = cpu_to_be32(bd->bi_memsize); - } -} -#endif /* CONFIG_OF_FLAT_TREE && CONFIG_OF_BOARD_SETUP */ diff --git a/board/mpc8568mds/init.S b/board/mpc8568mds/init.S deleted file mode 100644 index 972a7d4..0000000 --- a/board/mpc8568mds/init.S +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor. - * Copyright 2002,2003, Motorola Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include <config.h> -#include <mpc85xx.h> - - -/* - * TLB0 and TLB1 Entries - * - * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. - * However, CCSRBAR is then relocated to CFG_CCSRBAR right after - * these TLB entries are established. - * - * The TLB entries for DDR are dynamically setup in spd_sdram() - * and use TLB1 Entries 8 through 15 as needed according to the - * size of DDR memory. - * - * MAS0: tlbsel, esel, nv - * MAS1: valid, iprot, tid, ts, tsize - * MAS2: epn, sharen, x0, x1, w, i, m, g, e - * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr - */ -#define entry_start \ - mflr r1 ; \ - bl 0f ; - -#define entry_end \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - - - .section .bootpg, "ax" - .globl tlb1_entry -tlb1_entry: - entry_start - - /* - * Number of TLB0 and TLB1 entries in the following table - */ - .long (2f-1f)/16 - -1: -#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) - /* - * TLB0 4K Non-cacheable, guarded - * 0xff700000 4K Initial CCSRBAR mapping - * - * This ends up at a TLB0 Index==0 entry, and must not collide - * with other TLB0 Entries. - */ - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1) -#else -#error("Update the number of table entries in tlb1_entry") -#endif - - /* - * TLB0 16K Cacheable, non-guarded - * 0xd001_0000 16K Temporary Global data for initialization - * - * Use four 4K TLB0 entries. These entries must be cacheable - * as they provide the bootstrap memory before the memory - * controler and real memory have been configured. - * - * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, - * and must not collide with other TLB0 entries. - */ - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - .long TLB1_MAS0(0, 0, 0) - .long TLB1_MAS1(1, 0, 0, 0, 0) - .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), - 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), - 0,0,0,0,0,1,0,1,0,1) - - /* TLB 1 Initializations */ - /* - * TLBe 0: 16M Non-cacheable, guarded - * 0xff000000 16M FLASH (upper half) - * Out of reset this entry is only 4K. - */ - .long TLB1_MAS0(1, 0, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE + 0x1000000), - 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE + 0x1000000), - 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 1: 16M Non-cacheable, guarded - * 0xfe000000 16M FLASH (lower half) - */ - .long TLB1_MAS0(1, 1, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 2: 1G Non-cacheable, guarded - * 0x80000000 512M PCI1 MEM - * 0xa0000000 512M PCIe MEM - */ - .long TLB1_MAS0(1, 2, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G) - .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 3: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 8M PCI1 IO - * 0xe280_0000 8M PCIe IO - */ - .long TLB1_MAS0(1, 3, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 4: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - .long TLB1_MAS0(1, 4, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) - .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1) - - /* - * TLBe 5: 256K Non-cacheable, guarded - * 0xf8000000 32K BCSR - * 0xf8008000 32K PIB (CS4) - * 0xf8010000 32K PIB (CS5) - */ - .long TLB1_MAS0(1, 5, 0) - .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K) - .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0) - .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1) - -2: - entry_end - -/* - * LAW(Local Access Window) configuration: - * - *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0x8000_0000 0x9fff_ffff PCI1 MEM 512MB - *2) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB - *-) 0xe000_0000 0xe00f_ffff CCSR 1M - *3) 0xe200_0000 0xe27f_ffff PCI1 I/O 8M - *4) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M - *5) 0xc000_0000 0xdfff_ffff SRIO 512MB - *6.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB - *6.b) 0xf800_0000 0xf800_7fff BCSR 32KB - *6.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB - *6.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB - *6.e) 0xfe00_0000 0xffff_ffff Flash 32MB - * - *Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * The defines below are 1-off of the actual LAWAR0 usage. - * So LAWAR3 define uses the LAWAR4 register in the ECM. - */ - -#define LAWBAR0 0 -#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN) - -#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff) -#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff) -#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff) -#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M)) - -#define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff) -#define LAWAR4 (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M)) - - -#define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff) -#define LAWAR5 (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)) - -/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ -#define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff) -#define LAWAR6 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)) - - .section .bootpg, "ax" - .globl law_entry - -law_entry: - entry_start - .long (4f-3f)/8 -3: - .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3 - .long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6 -4: - entry_end diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c deleted file mode 100644 index 818ff13..0000000 --- a/board/mpc8568mds/mpc8568mds.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor. - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <spd.h> -#include <i2c.h> -#include <ioports.h> - -#include "bcsr.h" - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* GETH1 */ - {4, 10, 1, 0, 2}, /* TxD0 */ - {4, 9, 1, 0, 2}, /* TxD1 */ - {4, 8, 1, 0, 2}, /* TxD2 */ - {4, 7, 1, 0, 2}, /* TxD3 */ - {4, 23, 1, 0, 2}, /* TxD4 */ - {4, 22, 1, 0, 2}, /* TxD5 */ - {4, 21, 1, 0, 2}, /* TxD6 */ - {4, 20, 1, 0, 2}, /* TxD7 */ - {4, 15, 2, 0, 2}, /* RxD0 */ - {4, 14, 2, 0, 2}, /* RxD1 */ - {4, 13, 2, 0, 2}, /* RxD2 */ - {4, 12, 2, 0, 2}, /* RxD3 */ - {4, 29, 2, 0, 2}, /* RxD4 */ - {4, 28, 2, 0, 2}, /* RxD5 */ - {4, 27, 2, 0, 2}, /* RxD6 */ - {4, 26, 2, 0, 2}, /* RxD7 */ - {4, 11, 1, 0, 2}, /* TX_EN */ - {4, 24, 1, 0, 2}, /* TX_ER */ - {4, 16, 2, 0, 2}, /* RX_DV */ - {4, 30, 2, 0, 2}, /* RX_ER */ - {4, 17, 2, 0, 2}, /* RX_CLK */ - {4, 19, 1, 0, 2}, /* GTX_CLK */ - {1, 31, 2, 0, 3}, /* GTX125 */ - - /* GETH2 */ - {5, 10, 1, 0, 2}, /* TxD0 */ - {5, 9, 1, 0, 2}, /* TxD1 */ - {5, 8, 1, 0, 2}, /* TxD2 */ - {5, 7, 1, 0, 2}, /* TxD3 */ - {5, 23, 1, 0, 2}, /* TxD4 */ - {5, 22, 1, 0, 2}, /* TxD5 */ - {5, 21, 1, 0, 2}, /* TxD6 */ - {5, 20, 1, 0, 2}, /* TxD7 */ - {5, 15, 2, 0, 2}, /* RxD0 */ - {5, 14, 2, 0, 2}, /* RxD1 */ - {5, 13, 2, 0, 2}, /* RxD2 */ - {5, 12, 2, 0, 2}, /* RxD3 */ - {5, 29, 2, 0, 2}, /* RxD4 */ - {5, 28, 2, 0, 2}, /* RxD5 */ - {5, 27, 2, 0, 3}, /* RxD6 */ - {5, 26, 2, 0, 2}, /* RxD7 */ - {5, 11, 1, 0, 2}, /* TX_EN */ - {5, 24, 1, 0, 2}, /* TX_ER */ - {5, 16, 2, 0, 2}, /* RX_DV */ - {5, 30, 2, 0, 2}, /* RX_ER */ - {5, 17, 2, 0, 2}, /* RX_CLK */ - {5, 19, 1, 0, 2}, /* GTX_CLK */ - {1, 31, 2, 0, 3}, /* GTX125 */ - {4, 6, 3, 0, 2}, /* MDIO */ - {4, 5, 1, 0, 2}, /* MDC */ - {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ -}; - - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -extern long int spd_sdram(void); - -void local_bus_init(void); -void sdram_init(void); - -int board_early_init_f (void) -{ - /* - * Initialize local bus. - */ - local_bus_init (); - - enable_8568mds_duart(); - enable_8568mds_flash_write(); -#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS) - enable_8568mds_qe_mdio(); -#endif - -#ifdef CFG_I2C2_OFFSET - /* Enable I2C2_SCL and I2C2_SDA */ - volatile struct par_io *port_c; - port_c = (struct par_io*)(CFG_IMMR + 0xe0140); - port_c->cpdir2 |= 0x0f000000; - port_c->cppar2 &= ~0x0f000000; - port_c->cppar2 |= 0x0a000000; -#endif - - return 0; -} - -int checkboard (void) -{ - printf ("Board: 8568 MDS\n"); - - return 0; -} - -long int -initdram(int board_type) -{ - long dram_size = 0; - volatile immap_t *immap = (immap_t *)CFG_IMMR; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur= &immap->im_gur; - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - dram_size = spd_sdram(); - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - -/* - * Initialize Local Bus - */ -void -local_bus_init(void) -{ - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile ccsr_gur_t *gur = &immap->im_gur; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - - uint clkdiv; - uint lbc_hz; - sys_info_t sysinfo; - - get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & 0x0f) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; - - gur->lbiuiplldcr1 = 0x00078080; - if (clkdiv == 16) { - gur->lbiuiplldcr0 = 0x7c0f1bf0; - } else if (clkdiv == 8) { - gur->lbiuiplldcr0 = 0x6c0f1bf0; - } else if (clkdiv == 4) { - gur->lbiuiplldcr0 = 0x5c0f1bf0; - } - - lbc->lcrr |= 0x00030000; - - asm("sync;isync;msync"); -} - -/* - * Initialize SDRAM memory on the Local Bus. - */ -void -sdram_init(void) -{ -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) - - uint idx; - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE; - uint lsdmr_common; - - puts(" SDRAM: "); - - print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); - - /* - * Setup SDRAM Base and Option Registers - */ - lbc->or2 = CFG_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CFG_BR2_PRELIM; - asm("msync"); - - lbc->lbcr = CFG_LBC_LBCR; - asm("msync"); - - - lbc->lsrt = CFG_LBC_LSRT; - lbc->mrtpr = CFG_LBC_MRTPR; - asm("msync"); - - /* - * MPC8568 uses "new" 15-16 style addressing. - */ - lsdmr_common = CFG_LBC_LSDMR_COMMON; - lsdmr_common |= CFG_LBC_LSDMR_BSMA1516; - - /* - * Issue PRECHARGE ALL command. - */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL; - asm("sync;msync"); - *sdram_addr = 0xff; - ppcDcbf((unsigned long) sdram_addr); - udelay(100); - - /* - * Issue 8 AUTO REFRESH commands. - */ - for (idx = 0; idx < 8; idx++) { - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH; - asm("sync;msync"); - *sdram_addr = 0xff; - ppcDcbf((unsigned long) sdram_addr); - udelay(100); - } - - /* - * Issue 8 MODE-set command. - */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW; - asm("sync;msync"); - *sdram_addr = 0xff; - ppcDcbf((unsigned long) sdram_addr); - udelay(100); - - /* - * Issue NORMAL OP command. - */ - lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL; - asm("sync;msync"); - *sdram_addr = 0xff; - ppcDcbf((unsigned long) sdram_addr); - udelay(200); /* Overkill. Must wait > 200 bus cycles */ - -#endif /* enable SDRAM init */ -} - -#if defined(CFG_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CFG_MEMTEST_START; - uint *pend = (uint *) CFG_MEMTEST_END; - uint *p; - - printf("Testing DRAM from 0x%08x to 0x%08x\n", - CFG_MEMTEST_START, - CFG_MEMTEST_END); - - printf("DRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("DRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("DRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("DRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("DRAM test passed.\n"); - return 0; -} -#endif - -#if defined(CONFIG_PCI) -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc8568mds_config_table[] = { - { - PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - pci_cfgfunc_config_device, - {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER} - }, - {} -}; -#endif - -static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table: pci_mpc8568mds_config_table, -#endif - } -}; - -#endif /* CONFIG_PCI */ - -/* - * pib_init() -- Initialize the PCA9555 IO expander on the PIB board - */ -void -pib_init(void) -{ - u8 val8, orig_i2c_bus; - /* - * Assign PIB PMC2/3 to PCI bus - */ - - /*switch temporarily to I2C bus #2 */ - orig_i2c_bus = i2c_get_bus_num(); - i2c_set_bus_num(1); - - val8 = 0x00; - i2c_write(0x23, 0x6, 1, &val8, 1); - i2c_write(0x23, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x23, 0x2, 1, &val8, 1); - i2c_write(0x23, 0x3, 1, &val8, 1); - - val8 = 0x00; - i2c_write(0x26, 0x6, 1, &val8, 1); - val8 = 0x34; - i2c_write(0x26, 0x7, 1, &val8, 1); - val8 = 0xf9; - i2c_write(0x26, 0x2, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x26, 0x3, 1, &val8, 1); - - val8 = 0x00; - i2c_write(0x27, 0x6, 1, &val8, 1); - i2c_write(0x27, 0x7, 1, &val8, 1); - val8 = 0xff; - i2c_write(0x27, 0x2, 1, &val8, 1); - val8 = 0xef; - i2c_write(0x27, 0x3, 1, &val8, 1); - - asm("eieio"); -} - -void -pci_init_board(void) -{ -#ifdef CONFIG_PCI - pib_init(); - pci_mpc85xx_init(hose); -#endif -} diff --git a/board/mpc8568mds/u-boot.lds b/board/mpc8568mds/u-boot.lds deleted file mode 100644 index 71099f6..0000000 --- a/board/mpc8568mds/u-boot.lds +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ - -SECTIONS -{ - /* ELIOR - From RAM: From FLASH: 0xFFFFFFFC*/ - .resetvec 0xFFFFFFFC: - { - *(.resetvec) - } = 0xffff - - /*(ELIOR - From RAM: From FLASH: 0xFFFFF000*/ - .bootpg 0xFFFFF000: - { - cpu/mpc85xx/start.o (.bootpg) - board/mpc8568mds/init.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/mpc85xx/start.o (.text) - board/mpc8568mds/init.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - *(.text) - *(.fixup) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} |