diff options
Diffstat (limited to 'board/mpc8540ads/mpc8540ads.c')
-rw-r--r-- | board/mpc8540ads/mpc8540ads.c | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c new file mode 100644 index 0000000..c21cd9e --- /dev/null +++ b/board/mpc8540ads/mpc8540ads.c @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2002,2003, Motorola Inc. + * Xianghua Xiao, (X.Xiao@motorola.com) + * + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +extern long int spd_sdram (void); + +#include <common.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <spd.h> + +long int fixed_sdram (void); + +/* MPC8540ADS Board Status & Control Registers */ +#if 0 +typedef struct bscr_ { + unsigned long bcsr0; + unsigned long bcsr1; + unsigned long bcsr2; + unsigned long bcsr3; + unsigned long bcsr4; + unsigned long bcsr5; + unsigned long bcsr6; + unsigned long bcsr7; +} bcsr_t; +#endif + +int board_pre_init (void) +{ +#if defined(CONFIG_PCI) + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile ccsr_pcix_t *pci = &immr->im_pcix; + + pci->peer &= 0xffffffdf; /* disable master abort */ +#endif + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + + get_sys_info (&sysinfo); + + printf ("Board: Motorola MPC8540ADS Board\n"); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); + printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); + if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \ + || (CFG_LBC_LCRR & 0x0f) == 8) { + printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f)); + } else { + printf("\tLBC: unknown\n"); + } + printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); + return (0); +} + +long int initdram (int board_type) +{ + long dram_size = 0; + extern long spd_sdram (void); + volatile immap_t *immap = (immap_t *)CFG_IMMR; +#if !defined(CONFIG_RAM_AS_FLASH) + volatile ccsr_lbc_t *lbc= &immap->im_lbc; + sys_info_t sysinfo; + uint temp_lbcdll = 0; +#endif +#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) + volatile ccsr_gur_t *gur= &immap->im_gur; +#endif +#if defined(CONFIG_DDR_DLL) + uint temp_ddrdll = 0; + + /* Work around to stabilize DDR DLL */ + temp_ddrdll = gur->ddrdllcr; + gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; + asm("sync;isync;msync"); +#endif + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (); +#else + dram_size = fixed_sdram (); +#endif + +#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ + get_sys_info(&sysinfo); + /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */ + if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) { + lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000; + } else { +#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */ + lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */ +#endif + lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff; + udelay(200); + temp_lbcdll = gur->lbcdllcr; + gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; + asm("sync;isync;msync"); + } + lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */ + lbc->br2 = CFG_BR2_PRELIM; + lbc->lbcr = CFG_LBC_LBCR; + lbc->lsdmr = CFG_LBC_LSDMR_1; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_2; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_3; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_4; + asm("sync"); + (unsigned int) * (ulong *)0 = 0x000000ff; + lbc->lsdmr = CFG_LBC_LSDMR_5; + asm("sync"); + lbc->lsrt = CFG_LBC_LSRT; + asm("sync"); + lbc->mrtpr = CFG_LBC_MRTPR; + asm("sync"); +#endif + +#if defined(CONFIG_DDR_ECC) + { + /* Initialize all of memory for ECC, then + * enable errors */ + uint *p = 0; + uint i = 0; + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + dma_init(); + for (*p = 0; p < (uint *)(8 * 1024); p++) { + if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } + *p = (unsigned int)0xdeadbeef; + if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } + } + + /* 8K */ + dma_xfer((uint *)0x2000,0x2000,(uint *)0); + /* 16K */ + dma_xfer((uint *)0x4000,0x4000,(uint *)0); + /* 32K */ + dma_xfer((uint *)0x8000,0x8000,(uint *)0); + /* 64K */ + dma_xfer((uint *)0x10000,0x10000,(uint *)0); + /* 128k */ + dma_xfer((uint *)0x20000,0x20000,(uint *)0); + /* 256k */ + dma_xfer((uint *)0x40000,0x40000,(uint *)0); + /* 512k */ + dma_xfer((uint *)0x80000,0x80000,(uint *)0); + /* 1M */ + dma_xfer((uint *)0x100000,0x100000,(uint *)0); + /* 2M */ + dma_xfer((uint *)0x200000,0x200000,(uint *)0); + /* 4M */ + dma_xfer((uint *)0x400000,0x400000,(uint *)0); + + for (i = 1; i < dram_size / 0x800000; i++) { + dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); + } + + /* Enable errors for ECC */ + ddr->err_disable = 0x00000000; + asm("sync;isync;msync"); + } +#endif + + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) CFG_MEMTEST_START; + uint *pend = (uint *) CFG_MEMTEST_END; + uint *p; + + printf("SDRAM test phase 1:\n"); + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test phase 2:\n"); + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + printf("SDRAM test passed.\n"); + return 0; +} +#endif + + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + ************************************************************************/ +long int fixed_sdram (void) +{ + #ifndef CFG_RAMBOOT + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile ccsr_ddr_t *ddr= &immap->im_ddr; + + ddr->cs0_bnds = CFG_DDR_CS0_BNDS; + ddr->cs0_config = CFG_DDR_CS0_CONFIG; + ddr->timing_cfg_1 = CFG_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_DDR_TIMING_2; + ddr->sdram_mode = CFG_DDR_MODE; + ddr->sdram_interval = CFG_DDR_INTERVAL; + #if defined (CONFIG_DDR_ECC) + ddr->err_disable = 0x0000000D; + ddr->err_sbe = 0x00ff0000; + #endif + asm("sync;isync;msync"); + udelay(500); + #if defined (CONFIG_DDR_ECC) + /* Enable ECC checking */ + ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); + #else + ddr->sdram_cfg = CFG_DDR_CONTROL; + #endif + asm("sync; isync; msync"); + udelay(500); + #endif + return (CFG_SDRAM_SIZE * 1024 * 1024); +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ |