diff options
Diffstat (limited to 'board/modnet50/memsetup.S')
| -rw-r--r-- | board/modnet50/memsetup.S | 204 |
1 files changed, 204 insertions, 0 deletions
diff --git a/board/modnet50/memsetup.S b/board/modnet50/memsetup.S new file mode 100644 index 0000000..674b1d2 --- /dev/null +++ b/board/modnet50/memsetup.S @@ -0,0 +1,204 @@ +/* + * Memory Setup stuff - taken from Linux + * + * Copyright (c) 2002 Stephan Linz <linz@mazet.de>, <linz@li-pro.net> + * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> +#include <asm/arch/netarm_registers.h> + + +/* some parameters for the board */ +#define FLASH_90ns_WAIT_STATES ((NETARM_PLL_COUNT_VAL + 2) / 3) +#define FLASH_70ns_WAIT_STATES 4 + +#define NETARM_MMAP_CS0_BASE (PHYS_FLASH_1) +#if 1 +#define NETARM_MMAP_CS0_MASK (~(PHYS_FLASH_1_SIZE - 1)) +#else +#define NETARM_MMAP_CS0_MASK (~(1000000 - 1)) +#endif +#define NETARM_MMAP_CS1_BASE (PHYS_SDRAM_1) +#define NETARM_MMAP_CS1_MASK (~(PHYS_SDRAM_1_SIZE - 1)) +#define NETARM_MMAP_CS2_BASE (PHYS_SDRAM_2) +#define NETARM_MMAP_CS2_MASK (~(PHYS_SDRAM_2_SIZE - 1)) +#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) +#define NETARM_MMAP_CS3_BASE (PHYS_NVRAM_1) +#define NETARM_MMAP_CS3_MASK (~(PHYS_NVRAM_SIZE - 1)) +#endif +#define NETARM_MMAP_CS4_BASE (PHYS_EXT_1) +#define NETARM_MMAP_CS4_MASK (~(PHYS_EXT_SIZE - 1)) + +/* setting up the memory */ +.globl memsetup +memsetup: + +#if defined(CONFIG_MODNET50) + ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE) + +_jump_to_high: + /* + * MEM Config Reg + * --------------------------------------------------- + */ + ldr r0, =NETARM_MEM_MODULE_BASE + ldr r1, =( NETARM_MEM_REFR_PERIOD_USEC(16) | \ + NETARM_MEM_CFG_REFRESH_EN | \ + NETARM_MEM_CFG_REFR_CYCLE_5CLKS ) + str r1, [r0, #+NETARM_MEM_MODULE_CONFIG] + + +memsetup_cs0: + /* + * Base Addr / Option Reg 0 (Flash) + * --------------------------------------------------- + */ + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \ + NETARM_MEM_BAR_DRAM_FP | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_BAL | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR] + + /* trust that the bus size for flash was strapped correctly */ + /* this saves the bus width in r2 and then ORs it back in */ + /* it's pretty safe assumption, otherwise it wouldn't boot */ + ldr r2, [r0, #+NETARM_MEM_CS0_OPTIONS] + and r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK + +/* just a test: assume 32 bit flash mem */ +/* mov r2, #NETARM_MEM_OPT_32BIT */ + + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \ + NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \ + NETARM_MEM_OPT_BCYC_4 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_16BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + + orr r1, r1, r2 + str r1, [r0, #+NETARM_MEM_CS0_OPTIONS] + + +memsetup_cs1: + /* + * Base Addr / Option Reg 1 (DRAM #1) + * --------------------------------------------------- + */ +#ifdef CONFIG_NETARM_NET40_REV2 + /* we have to config SDRAM in burst mode */ + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ + NETARM_MEM_OPT_BCYC_2 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_WAIT_STATES(0) | \ + NETARM_MEM_OPT_32BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ + NETARM_MEM_BAR_DRAM_SYNC | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ + NETARM_MEM_BAR_DRAM_SEL | \ + NETARM_MEM_BAR_BURST_EN | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] +#else + /* we have to config FPDRAM in burst mode with smaller burst access size */ + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \ + NETARM_MEM_OPT_BCYC_2 | \ + NETARM_MEM_OPT_BSIZE_16 | \ + NETARM_MEM_OPT_WAIT_STATES(0) | \ + NETARM_MEM_OPT_32BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS1_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \ + NETARM_MEM_BAR_DRAM_SYNC | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_UNBAL | \ + NETARM_MEM_BAR_DRAM_SEL | \ + NETARM_MEM_BAR_BURST_EN | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR] + +#endif /* CONFIG_NETARM_NET40_REV2 */ + + +memsetup_cs3: + /* + * Base Addr / Option Reg 3 (EEPROM, NVRAM) + * --------------------------------------------------- + */ +#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE) + ldr r1, =( NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \ + NETARM_MEM_OPT_BCYC_3 | \ + NETARM_MEM_OPT_BSIZE_2 | \ + NETARM_MEM_OPT_WAIT_STATES(10) | \ + NETARM_MEM_OPT_8BIT | \ + NETARM_MEM_OPT_READ_ASYNC | \ + NETARM_MEM_OPT_WRITE_ASYNC ) + str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] + + ldr r1, =( NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \ + NETARM_MEM_BAR_DRAM_FP | \ + NETARM_MEM_BAR_DRAM_MUX_INT | \ + NETARM_MEM_BAR_DRAM_MUX_BAL | \ + NETARM_MEM_BAR_VALID ) + str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] +#else + /* we don't need EEPROM --> no config */ + ldr r1, =( 0 ) + str r1, [r0, #+NETARM_MEM_CS3_OPTIONS] + + ldr r1, =( 0 ) + str r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR] +#endif + + +#else +/* +#error "missing CONFIG_MODNET50 (see your config.h)" +*/ +#endif /* CONFIG_MODNET50 */ + + +memsetup_end: + /* + * manipulate address in lr and ip to match new + * address space + */ + ldr r3, =(NETARM_MMAP_CS0_BASE) + mov r0, lr + add r0, r3, r0 + mov lr, r0 + mov r0, ip + add r0, r3, r0 + mov ip, r0 + + /* everything is fine now */ + mov pc, lr |