10 files changed, 0 insertions, 800 deletions

diff --git a/board/matrix_vision/mergerbox/Kconfig b/board/matrix_vision/mergerbox/Kconfig
deleted file mode 100644
index 3857535..0000000
--- a/board/matrix_vision/mergerbox/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MERGERBOX
-
-config SYS_BOARD
-	default "mergerbox"
-
-config SYS_VENDOR
-	default "matrix_vision"
-
-config SYS_CONFIG_NAME
-	default "MERGERBOX"
-
-endif
diff --git a/board/matrix_vision/mergerbox/MAINTAINERS b/board/matrix_vision/mergerbox/MAINTAINERS
deleted file mode 100644
index 20bd073..0000000
--- a/board/matrix_vision/mergerbox/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MERGERBOX BOARD
-#M:	Andre Schwarz <andre.schwarz@matrix-vision.de>
-S:	Orphan (since 2014-03)
-F:	board/matrix_vision/mergerbox/
-F:	include/configs/MERGERBOX.h
-F:	configs/MERGERBOX_defconfig
diff --git a/board/matrix_vision/mergerbox/Makefile b/board/matrix_vision/mergerbox/Makefile
deleted file mode 100644
index 11a7fd2..0000000
--- a/board/matrix_vision/mergerbox/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += mergerbox.o pci.o fpga.o sm107.o
diff --git a/board/matrix_vision/mergerbox/README b/board/matrix_vision/mergerbox/README
deleted file mode 100644
index 1994b65..0000000
--- a/board/matrix_vision/mergerbox/README
+++ /dev/null
@@ -1,59 +0,0 @@
-Matrix Vision MergerBox
------------------------
-
-1.	Board Description
-
-	The MergerBox is a 120x160mm single board computing platform
-	for 3D Full-HD digital video processing.
-
-	Power Supply is 10-32VDC.
-
-2	System Components
-
-2.1	CPU
-	Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
-	256 MByte DDR-II memory @ 333MHz data rate.
-	64 MByte Nor Flash on local bus.
-	1 GByte Nand Flash on FCM.
-	1 Vitesse VSC8601 RGMII ethernet Phys.
-	1 USB host controller over ULPI I/F with 4-Port hub.
-	2 serial ports. Console running on ttyS0 @ 115200 8N1.
-	1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
-	2 PCIe x1 busses on local mPCIe and cutom expansion connector.
-	2 SATA host ports.
-	System configuration (HRCW) is taken from I2C EEPROM.
-
-2.2	Graphics
-	SM107 emebedded video controller driving a 5" 800x480 TFT panel.
-	Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
-
-2.3	FPGA
-	Altera Cyclone-IV EP4C115 with several PCI DMA engines.
-	Connects to 7x Gennum 3G-SDI transceivers as video interconnect
-	as well as a HDMI v1.4 compliant output for 3D monitoring.
-	Utilizes two more DDR-II controllers providing 256MB memory.
-
-2.4	I2C
-	Bus1:
-		AD7418 @ 0x50 for voltage/temp. monitoring.
-		SX8650 @ 0x90 touch controller for HMI.
-		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
-	Bus2:
-		mPCIe SMBus
-		SiI9022A @ 0x72/0xC0 HDMI transmitter.
-		TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
-		LMH1983 @ 0xCA video PLL.
-		DS1338C @ 0xD0 real-time clock with embedded crystal.
-		9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
-
-3	Flash layout.
-
-	reset vector is 0x00000100, i.e. low boot.
-
-	00000000	u-boot binary.
-	00100000	FPGA raw bit file.
-	00300000	FIT image holding kernel, dtb and rescue squashfs.
-	03d00000	u-boot environment.
-	03e00000	splash image
-
-	mtd partitions are propagated to linux kernel via device tree blob.
diff --git a/board/matrix_vision/mergerbox/fpga.c b/board/matrix_vision/mergerbox/fpga.c
deleted file mode 100644
index 57552c1..0000000
--- a/board/matrix_vision/mergerbox/fpga.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * (C) Copyright 2011
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ACEX1K.h>
-#include <command.h>
-#include "mergerbox.h"
-#include "fpga.h"
-
-Altera_CYC2_Passive_Serial_fns altera_fns = {
-	fpga_null_fn,
-	fpga_config_fn,
-	fpga_status_fn,
-	fpga_done_fn,
-	fpga_wr_fn,
-	fpga_null_fn,
-	fpga_null_fn,
-};
-
-Altera_desc cyclone2 = {
-	Altera_CYC2,
-	passive_serial,
-	Altera_EP2C20_SIZE,
-	(void *) &altera_fns,
-	NULL,
-	0
-};
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int mergerbox_init_fpga(void)
-{
-	debug("Initialize FPGA interface\n");
-	fpga_init();
-	fpga_add(fpga_altera, &cyclone2);
-
-	return 1;
-}
-
-int fpga_null_fn(int cookie)
-{
-	return 0;
-}
-
-int fpga_config_fn(int assert, int flush, int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	dvo &= ~FPGA_CONFIG;
-	gpio->dat = dvo;
-	udelay(5);
-	dvo |= FPGA_CONFIG;
-	gpio->dat = dvo;
-
-	return assert;
-}
-
-int fpga_done_fn(int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	udelay(10);
-	debug("CONF_DONE check ... ");
-	if (gpio->dat & FPGA_CONF_DONE) {
-		debug("high\n");
-		result = 1;
-	} else
-		debug("low\n");
-
-	return result;
-}
-
-int fpga_status_fn(int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int result = 0;
-
-	debug("STATUS check ... ");
-	if (gpio->dat & FPGA_STATUS) {
-		debug("high\n");
-		result = 1;
-	} else
-		debug("low\n");
-
-	return result;
-}
-
-int fpga_clk_fn(int assert_clk, int flush, int cookie)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	u32 dvo = gpio->dat;
-
-	debug("CLOCK %s\n", assert_clk ? "high" : "low");
-	if (assert_clk)
-		dvo |= FPGA_CCLK;
-	else
-		dvo &= ~FPGA_CCLK;
-
-	if (flush)
-		gpio->dat = dvo;
-
-	return assert_clk;
-}
-
-static inline int _write_fpga(u8 val, int dump)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&im->gpio[0];
-	int i;
-	u32 dvo = gpio->dat;
-
-	if (dump)
-		debug("  %02x -> ", val);
-	for (i = 0; i < 8; i++) {
-		dvo &= ~FPGA_CCLK;
-		gpio->dat = dvo;
-		dvo &= ~FPGA_DIN;
-		if (dump)
-			debug("%d ", val&1);
-		if (val & 1)
-			dvo |= FPGA_DIN;
-		gpio->dat = dvo;
-		dvo |= FPGA_CCLK;
-		gpio->dat = dvo;
-		val >>= 1;
-	}
-	if (dump)
-		debug("\n");
-
-	return 0;
-}
-
-int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
-{
-	unsigned char *data = (unsigned char *) buf;
-	int i;
-
-	debug("fpga_wr: buf %p / size %d\n", buf, len);
-	for (i = 0; i < len; i++)
-		_write_fpga(data[i], 0);
-	debug("\n");
-
-	return FPGA_SUCCESS;
-}
diff --git a/board/matrix_vision/mergerbox/fpga.h b/board/matrix_vision/mergerbox/fpga.h
deleted file mode 100644
index dbe9bff..0000000
--- a/board/matrix_vision/mergerbox/fpga.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern int mergerbox_init_fpga(void);
-
-extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie);
-extern int fpga_status_fn(int cookie);
-extern int fpga_config_fn(int assert, int flush, int cookie);
-extern int fpga_done_fn(int cookie);
-extern int fpga_clk_fn(int assert_clk, int flush, int cookie);
-extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
-extern int fpga_null_fn(int cookie);
diff --git a/board/matrix_vision/mergerbox/mergerbox.c b/board/matrix_vision/mergerbox/mergerbox.c
deleted file mode 100644
index 5c891d1..0000000
--- a/board/matrix_vision/mergerbox/mergerbox.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-#include <fdt_support.h>
-#include <spd_sdram.h>
-#include "mergerbox.h"
-#include "fpga.h"
-#include "../common/mv_common.h"
-
-static void setup_serdes(void)
-{
-	fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
-		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-	fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
-		FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram(void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-		CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-phys_size_t initdram(int board_type)
-{
-	u32 msize;
-
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
-
-	/* Enable PCI_CLK[0:1] */
-	clk->occr |= 0xc0000000;
-	udelay(2000);
-
-#if defined(CONFIG_SPD_EEPROM)
-	msize = spd_sdram();
-#else
-	immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize_log2;
-
-	msize = CONFIG_SYS_DDR_SIZE;
-	msize_log2 = __ilog2(msize);
-
-	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
-	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
-
-	im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
-	udelay(50000);
-
-	im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-	udelay(1000);
-
-	im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
-	im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-	udelay(1000);
-
-	im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
-	im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
-	im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-	im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
-	im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	__asm__ __volatile__("sync");
-	udelay(1000);
-
-	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-	udelay(2000);
-#endif
-	setup_serdes();
-
-	return msize << 20;
-}
-
-int checkboard(void)
-{
-	puts("Board: Matrix Vision MergerBox\n");
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u16 dim;
-	int result;
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile gpio83xx_t *gpio = (gpio83xx_t *)&immr->gpio[1];
-	unsigned char mac[6], mac_verify[6];
-	char *s = getenv("reset_env");
-
-	for (dim = 10; dim < 180; dim += 5) {
-		mergerbox_tft_dim(dim);
-		udelay(100000);
-	}
-
-	if (s)
-		mv_reset_environment();
-
-	i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac, sizeof(mac));
-
-	/* check if Matrix Vision prefix present and export to env */
-	if (mac[0] == 0x00 && mac[1] == 0x0c && mac[2] == 0x8d) {
-		printf("valid MAC found in eeprom: %pM\n", mac);
-		eth_setenv_enetaddr("ethaddr", mac);
-	} else {
-		printf("no valid MAC found in eeprom.\n");
-
-		/* no: check the env */
-		if (!eth_getenv_enetaddr("ethaddr", mac)) {
-			printf("no valid MAC found in env either.\n");
-			/* TODO: ask for valid MAC */
-		} else {
-			printf("valid MAC found in env: %pM\n", mac);
-			printf("updating MAC in eeprom.\n");
-
-			do {
-				result = test_and_clear_bit(20, &gpio->dat);
-				if (result)
-					printf("unprotect EEPROM failed !\n");
-				udelay(20000);
-			} while(result);
-
-			i2c_write(SPD_EEPROM_ADDRESS, 0x80, 2, mac, 6);
-			udelay(20000);
-
-			do {
-				result = test_and_set_bit(20, &gpio->dat);
-				if (result)
-					printf("protect EEPROM failed !\n");
-				udelay(20000);
-			} while(result);
-
-			printf("verify MAC %pM ... ", mac);
-			i2c_read(SPD_EEPROM_ADDRESS, 0x80, 2, mac_verify, 6);
-
-			if (!strncmp((char *)mac, (char *)mac_verify, 6))
-				printf("ok.\n");
-			else
-				/* TODO: retry or do something useful */
-				printf("FAILED (got %pM) !\n", mac_verify);
-		}
-	}
-
-	return 0;
-}
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat &= ~TFT_SPI_CPLD_CS;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
-	iopd->dat |= TFT_SPI_CPLD_CS;
-}
-
-/* control backlight pwm (display brightness).
- * allow values 0-250 with 0 = turn off and 250 = max brightness
- */
-void mergerbox_tft_dim(u16 value)
-{
-	struct spi_slave *slave;
-	u16 din;
-	u16 dout = 0;
-
-	if (value > 0 && value < 250)
-		dout = 0x4000 | value;
-
-	slave = spi_setup_slave(0, 0, 1000000, SPI_MODE_0 | SPI_CS_HIGH);
-	spi_claim_bus(slave);
-	spi_xfer(slave, 16, &dout, &din, SPI_XFER_BEGIN | SPI_XFER_END);
-	spi_release_bus(slave);
-	spi_free_slave(slave);
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-	fdt_fixup_dr_usb(blob, bd);
-	ft_pci_setup(blob, bd);
-}
diff --git a/board/matrix_vision/mergerbox/mergerbox.h b/board/matrix_vision/mergerbox/mergerbox.h
deleted file mode 100644
index 53eab28..0000000
--- a/board/matrix_vision/mergerbox/mergerbox.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __MERGERBOX_H__
-#define __MERGERBOX_H__
-
-#define MV_GPIO
-
-/*
- * GPIO Bank 1
- */
-#define	TFT_SPI_EN	(0x80000000>>0)
-#define	FPGA_CONFIG	(0x80000000>>1)
-#define	FPGA_STATUS	(0x80000000>>2)
-#define	FPGA_CONF_DONE	(0x80000000>>3)
-#define	FPGA_DIN	(0x80000000>>4)
-#define	FPGA_CCLK	(0x80000000>>5)
-#define	MAN_RST		(0x80000000>>6)
-#define	FPGA_SYS_RST	(0x80000000>>7)
-#define	WD_WDI		(0x80000000>>8)
-#define	TFT_RST		(0x80000000>>9)
-#define	HISCON_GPIO1	(0x80000000>>10)
-#define	HISCON_GPIO2	(0x80000000>>11)
-#define	B2B_GPIO2	(0x80000000>>12)
-#define	CCU_GPIN	(0x80000000>>13)
-#define	CCU_GPOUT	(0x80000000>>14)
-#define	TFT_GPIO0	(0x80000000>>15)
-#define	TFT_GPIO1	(0x80000000>>16)
-#define	TFT_GPIO2	(0x80000000>>17)
-#define	TFT_GPIO3	(0x80000000>>18)
-#define	B2B_GPIO0	(0x80000000>>19)
-#define	B2B_GPIO1	(0x80000000>>20)
-#define	TFT_SPI_CPLD_CS	(0x80000000>>21)
-#define	TFT_SPI_CS	(0x80000000>>22)
-#define	CCU_PWR_EN	(0x80000000>>23)
-#define	B2B_GPIO3	(0x80000000>>24)
-#define	CCU_PWR_STAT	(0x80000000>>25)
-
-#define MV_GPIO1_DAT	(FPGA_CONFIG|CCU_PWR_EN|TFT_SPI_CPLD_CS)
-#define MV_GPIO1_OUT	(TFT_SPI_EN|FPGA_CONFIG|FPGA_DIN|FPGA_CCLK|CCU_PWR_EN| \
-			 TFT_SPI_CPLD_CS)
-#define MV_GPIO1_ODE	(FPGA_CONFIG|MAN_RST)
-
-/*
- * GPIO Bank 2
- */
-#define	SPI_FLASH_WP	(0x80000000>>10)
-#define	SYS_EEPROM_WP	(0x80000000>>11)
-#define	SPI_FLASH_CS	(0x80000000>>22)
-
-#define MV_GPIO2_DAT	(SYS_EEPROM_WP|SPI_FLASH_CS)
-#define MV_GPIO2_OUT	(SPI_FLASH_WP|SYS_EEPROM_WP|SPI_FLASH_CS)
-#define MV_GPIO2_ODE	0
-
-void mergerbox_tft_dim(u16 value);
-
-#endif
diff --git a/board/matrix_vision/mergerbox/pci.c b/board/matrix_vision/mergerbox/pci.c
deleted file mode 100644
index 480f3ed..0000000
--- a/board/matrix_vision/mergerbox/pci.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-#include "mergerbox.h"
-#include "fpga.h"
-#include "../common/mv_common.h"
-
-static struct pci_region pci_regions[] = {
-	{
-		.bus_start = CONFIG_SYS_PCI_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCI_MEM_PHYS,
-		.size = CONFIG_SYS_PCI_MEM_SIZE,
-		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI_MMIO_BASE,
-		.phys_start = CONFIG_SYS_PCI_MMIO_PHYS,
-		.size = CONFIG_SYS_PCI_MMIO_SIZE,
-		.flags = PCI_REGION_MEM
-	},
-	{
-		.bus_start = CONFIG_SYS_PCI_IO_BASE,
-		.phys_start = CONFIG_SYS_PCI_IO_PHYS,
-		.size = CONFIG_SYS_PCI_IO_SIZE,
-		.flags = PCI_REGION_IO
-	}
-};
-
-static struct pci_region pcie_regions_0[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
-		.size = CONFIG_SYS_PCIE1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-static struct pci_region pcie_regions_1[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE2_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE2_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
-		.size = CONFIG_SYS_PCIE2_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	volatile sysconf83xx_t *sysconf = &immr->sysconf;
-	volatile clk83xx_t *clk = (clk83xx_t *)&immr->clk;
-	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-	volatile law83xx_t *pcie_law = sysconf->pcielaw;
-	struct pci_region *reg[] = { pci_regions };
-	struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
-
-	volatile gpio83xx_t *gpio;
-	gpio = (gpio83xx_t *)&immr->gpio[0];
-
-	gpio->dat = MV_GPIO1_DAT;
-	gpio->odr = MV_GPIO1_ODE;
-	gpio->dir = MV_GPIO1_OUT;
-
-	gpio = (gpio83xx_t *)&immr->gpio[1];
-
-	gpio->dat = MV_GPIO2_DAT;
-	gpio->odr = MV_GPIO2_ODE;
-	gpio->dir = MV_GPIO2_OUT;
-
-	printf("SICRH / SICRL : 0x%08x / 0x%08x\n", immr->sysconf.sicrh,
-		immr->sysconf.sicrl);
-
-	/* Enable PCI_CLK[0:1] */
-	clk->occr |= 0xc0000000;
-	udelay(2000);
-
-	mergerbox_init_fpga();
-	mv_load_fpga();
-
-	mergerbox_tft_dim(0);
-
-	/* Configure PCI Local Access Windows */
-	pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
-	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
-
-	pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
-	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
-
-	udelay(2000);
-
-	mpc83xx_pci_init(1, reg);
-
-	/* Deassert the resets in the control register */
-	out_be32(&sysconf->pecr1, 0xE0008000);
-	out_be32(&sysconf->pecr2, 0xE0008000);
-	udelay(2000);
-
-	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	mpc83xx_pcie_init(2, pcie_reg);
-}
diff --git a/board/matrix_vision/mergerbox/sm107.c b/board/matrix_vision/mergerbox/sm107.c
deleted file mode 100644
index d24f926..0000000
--- a/board/matrix_vision/mergerbox/sm107.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2011 Matrix Vision GmbH
- * Andre Schwarz <andre.schwarz@matrix-vision.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-#include <sm501.h>
-#include <pci.h>
-#include "../common/mv_common.h"
-
-#ifdef CONFIG_VIDEO
-static const SMI_REGS init_regs_800x480[] = {
-	/* set endianess to little endian */
-	{0x0005c, 0x00000000},
-	/* PCI drive 12mA */
-	{0x00004, 0x42401001},
-	/* current clock */
-	{0x0003c, 0x310a1818},
-	/* clocks for pm0... */
-	{0x00040, 0x0002184f},
-	{0x00044, 0x2a1a0a01},
-	/* GPIO */
-	{0x10008, 0x00000000},
-	{0x1000C, 0x00000000},
-	/* panel control regs */
-	{0x80000, 0x0f017106},
-	{0x80004, 0x0},
-	{0x80008, 0x0},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0c800c80},
-	/* width 0x320 */
-	{0x80014, 0x03200000},
-	/* height 0x1e0 */
-	{0x80018, 0x01E00000},
-	{0x8001C, 0x0},
-	{0x80020, 0x01df031f},
-	{0x80024, 0x041f031f},
-	{0x80028, 0x00800347},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00000000},
-	/* ZV[0:7] */
-	{0x00008, 0x00ff0000},
-	/* 24-Bit TFT */
-	{0x0000c, 0x3f000000},
-	{0, 0}
-};
-
-/*
- * Returns SM107 register base address. First thing called in the driver.
- */
-unsigned int board_video_init(void)
-{
-	pci_dev_t devbusfn;
-	u32 addr;
-
-	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-	if (devbusfn != -1) {
-		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1,
-			(u32 *)&addr);
-		return addr & 0xfffffffe;
-	}
-
-	return 0;
-}
-
-/*
- * Called after initializing the SM501 and before clearing the screen.
- */
-void board_validate_screen(unsigned int base)
-{
-}
-
-/*
- * Returns SM107 framebuffer address
- */
-unsigned int board_video_get_fb(void)
-{
-	pci_dev_t devbusfn;
-	u32 addr;
-
-	devbusfn = pci_find_device(PCI_VENDOR_SM, PCI_DEVICE_SM501, 0);
-	if (devbusfn != -1) {
-		pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0,
-			(u32 *)&addr);
-		addr &= 0xfffffffe;
-#ifdef CONFIG_VIDEO_SM501_FBMEM_OFFSET
-		addr += CONFIG_VIDEO_SM501_FBMEM_OFFSET;
-#endif
-		return addr;
-	}
-
-	printf("board_video_get_fb(): FAILED\n");
-
-	return 0;
-}
-
-/*
- * Return a pointer to the initialization sequence.
- */
-const SMI_REGS *board_get_regs(void)
-{
-	return init_regs_800x480;
-}
-
-int board_get_width(void)
-{
-	return 800;
-}
-
-int board_get_height(void)
-{
-	return 480;
-}
-#endif