summaryrefslogtreecommitdiff
path: root/board/lwmon
diff options
context:
space:
mode:
Diffstat (limited to 'board/lwmon')
-rw-r--r--board/lwmon/flash.c66
-rw-r--r--board/lwmon/lwmon.c58
-rw-r--r--board/lwmon/pcmcia.c30
3 files changed, 77 insertions, 77 deletions
diff --git a/board/lwmon/flash.c b/board/lwmon/flash.c
index 8d98545..f71cc24 100644
--- a/board/lwmon/flash.c
+++ b/board/lwmon/flash.c
@@ -28,7 +28,7 @@
#if defined(CONFIG_ENV_IS_IN_FLASH)
# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CONFIG_ENV_OFFSET)
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
# endif
# ifndef CONFIG_ENV_SIZE
# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
@@ -40,14 +40,14 @@
/*---------------------------------------------------------------------*/
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_data (flash_info_t *info, ulong dest, ulong data);
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
static int write_data_buf (flash_info_t * info, ulong dest, uchar * cp, int len);
#endif
static void flash_get_offsets (ulong base, flash_info_t *info);
@@ -57,13 +57,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);
unsigned long flash_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
unsigned long size_b0, size_b1;
int i;
/* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
@@ -108,25 +108,25 @@ unsigned long flash_init (void)
memctl->memc_br1, memctl->memc_or1);
/* Remap FLASH according to real size */
- memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CFG_OR_TIMING_FLASH |
+ memctl->memc_or0 = (-size_b0 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
OR_CSNT_SAM | OR_ACS_DIV1;
- memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V;
+ memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_V;
debug ("## BR0: 0x%08x OR0: 0x%08x\n",
memctl->memc_br0, memctl->memc_or0);
/* Re-do sizing to get full correct info */
- size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
flash_info[0].size = size_b0;
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
@@ -139,27 +139,27 @@ unsigned long flash_init (void)
#endif
if (size_b1) {
- memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CFG_OR_TIMING_FLASH |
+ memctl->memc_or1 = (-size_b1 & 0xFFFF8000) | CONFIG_SYS_OR_TIMING_FLASH |
OR_CSNT_SAM | OR_ACS_DIV1;
- memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
BR_PS_32 | BR_V;
debug ("## BR1: 0x%08x OR1: 0x%08x\n",
memctl->memc_br1, memctl->memc_or1);
/* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
&flash_info[1]);
flash_info[1].size = size_b1;
- flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+ flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+monitor_flash_len-1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[1]);
#endif
@@ -342,10 +342,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = 0x00FF00FF; /* restore read mode */
@@ -409,7 +409,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
udelay (1000);
/* This takes awfully long - up to 50 ms and more */
while (((status = *addr) & 0x00800080) != 0x00800080) {
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0x00FF00FF; /* reset to read mode */
return 1;
@@ -435,7 +435,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
udelay (1000);
while (((status = *addr) & 0x00800080) != 0x00800080) {
- if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0x00B000B0; /* suspend erase */
*addr = 0x00FF00FF; /* reset to read mode */
@@ -504,10 +504,10 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
/*
* handle FLASH_WIDTH aligned part
*/
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
while(cnt >= FLASH_WIDTH) {
- i = CFG_FLASH_BUFFER_SIZE > cnt ?
- (cnt & ~(FLASH_WIDTH - 1)) : CFG_FLASH_BUFFER_SIZE;
+ i = CONFIG_SYS_FLASH_BUFFER_SIZE > cnt ?
+ (cnt & ~(FLASH_WIDTH - 1)) : CONFIG_SYS_FLASH_BUFFER_SIZE;
if((rc = write_data_buf(info, wp, src,i)) != 0)
return rc;
wp += i;
@@ -526,7 +526,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
wp += FLASH_WIDTH;
cnt -= FLASH_WIDTH;
}
-#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+#endif /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
if (cnt == 0) {
return (0);
@@ -594,7 +594,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
if (flag)
enable_interrupts();
- if (flash_status_check(addr, CFG_FLASH_WRITE_TOUT, "write") != 0) {
+ if (flash_status_check(addr, CONFIG_SYS_FLASH_WRITE_TOUT, "write") != 0) {
return (1);
}
@@ -603,7 +603,7 @@ static int write_data (flash_info_t *info, ulong dest, ulong data)
return (0);
}
-#ifdef CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*-----------------------------------------------------------------------
* Write a buffer to Flash, returns:
* 0 - OK
@@ -627,7 +627,7 @@ static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len)
*addr = 0x00500050; /* clear status */
*addr = 0x00e800e8; /* write buffer */
- if((retcode = flash_status_check(addr, CFG_FLASH_BUFFER_WRITE_TOUT,
+ if((retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
"write to buffer")) == 0) {
cnt = len / FLASH_WIDTH;
*addr = (cnt-1) | ((cnt-1) << 16);
@@ -635,14 +635,14 @@ static int write_data_buf(flash_info_t * info, ulong dest, uchar * cp, int len)
*dst++ = *src++;
}
*addr = 0x00d000d0; /* write buffer confirm */
- retcode = flash_status_check(addr, CFG_FLASH_BUFFER_WRITE_TOUT,
+ retcode = flash_status_check(addr, CONFIG_SYS_FLASH_BUFFER_WRITE_TOUT,
"buffer write");
}
*addr = 0x00FF00FF; /* restore read mode */
*addr = 0x00500050; /* clear status */
return retcode;
}
-#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */
/*-----------------------------------------------------------------------
*/
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 4a2d8e4..aadd254 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -66,7 +66,7 @@ extern void disable_putc(void);
*/
const uint sdram_table[] =
{
-#if defined(CFG_MEMORY_75) || defined(CFG_MEMORY_8E)
+#if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E)
/*
* Single Read. (Offset 0 in UPM RAM)
*/
@@ -114,7 +114,7 @@ const uint sdram_table[] =
0x7FFFFC07, /* last */
0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
#endif
-#ifdef CFG_MEMORY_7E
+#ifdef CONFIG_SYS_MEMORY_7E
/*
* Single Read. (Offset 0 in UPM RAM)
*/
@@ -211,7 +211,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
phys_size_t initdram (int board_type)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
long int size_b0;
long int size8, size9;
@@ -222,19 +222,19 @@ phys_size_t initdram (int board_type)
*/
upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
/* burst length=4, burst type=sequential, CAS latency=2 */
- memctl->memc_mar = CFG_MAR;
+ memctl->memc_mar = CONFIG_SYS_MAR;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
- memctl->memc_or3 = CFG_OR3_PRELIM;
- memctl->memc_br3 = CFG_BR3_PRELIM;
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
/* initialize memory address register */
- memctl->memc_mamr = CFG_MAMR_8COL; /* refresh not enabled yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */
/* mode initialization (offset 5) */
udelay (200); /* 0x80006105 */
@@ -268,22 +268,22 @@ phys_size_t initdram (int board_type)
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
- memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE;
udelay (500);
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
udelay (500);
}
@@ -293,7 +293,7 @@ phys_size_t initdram (int board_type)
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) |
OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
- memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
udelay (1000);
return (size_b0);
@@ -327,7 +327,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
memctl->memc_mamr = mamr_value;
@@ -359,7 +359,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
int board_early_init_f (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/* Disable Ethernet TENA on Port B
* Necessary because of pull up in COM3 port.
@@ -437,7 +437,7 @@ void reset_phy (void)
/* maximum number of "magic" key codes that can be assigned */
-static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
static uchar *key_match (uchar *);
@@ -481,7 +481,7 @@ static void kbd_init (void)
uchar val, errcd;
int i;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
gd->kbd_status = 0;
@@ -862,7 +862,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int i;
#if 0 /* Done in kbd_init */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
/* Read keys */
@@ -887,7 +887,7 @@ U_BOOT_CMD(
);
/* Read and set LSB switch */
-#define CFG_PC_TXD1_ENA 0x0008 /* PC.12 */
+#define CONFIG_SYS_PC_TXD1_ENA 0x0008 /* PC.12 */
/***********************************************************************
F* Function: int do_lsb (cmd_tbl_t *cmdtp, int flag,
@@ -920,7 +920,7 @@ V* Verification: dzu@denx.de
int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar val;
- immap_t *immr = (immap_t *) CFG_IMMR;
+ immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
switch (argc) {
case 1: /* lsb - print setting */
@@ -932,14 +932,14 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp (argv[1], "on") == 0) {
val |= 0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat |= CFG_PC_TXD1_ENA;
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else if (strcmp (argv[1], "off") == 0) {
val &= ~0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else {
break;
}
@@ -980,7 +980,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
uchar pic_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_PICIO_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg));
}
/***********************************************************************
@@ -1001,7 +1001,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
void pic_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_PICIO_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val);
}
/*---------------------- Board Control Functions ----------------------*/
@@ -1022,7 +1022,7 @@ V* Verification: dzu@denx.de
void board_poweroff (void)
{
/* Turn battery off */
- ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
+ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
while (1);
}
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
index 8825bd9..ad2e60d 100644
--- a/board/lwmon/pcmcia.c
+++ b/board/lwmon/pcmcia.c
@@ -51,10 +51,10 @@ int pcmcia_hardware_enable(int slot)
#endif
udelay(10000);
- immap = (immap_t *)CFG_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
+ cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
/*
* Configure SIUMCR to enable PCMCIA port B
@@ -108,8 +108,8 @@ int pcmcia_hardware_enable(int slot)
/* switch VCC on */
val |= MAX1604_OP_SUS | MAX1604_VCCBON;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
- i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
udelay(500000);
@@ -137,13 +137,13 @@ int pcmcia_hardware_disable(int slot)
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
- immap = (immap_t *)CFG_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/* remove all power, put output in high impedance state */
val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
- i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
@@ -181,8 +181,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
- immap = (immap_t *)CFG_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+ immap = (immap_t *)CONFIG_SYS_IMMR;
+ pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
@@ -199,8 +199,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
*/
debug ("PCMCIA power OFF\n");
val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
- i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
val = 0;
switch(vcc) {
@@ -216,7 +216,7 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
- i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+ i2c_write (CONFIG_SYS_I2C_POWER_A_ADDR, 0, 0, &val, 1);
if (val) {
debug ("PCMCIA powered at %sV\n",
(val & MAX1604_VCC_35) ? "3.3" : "5.0");