3 files changed, 20 insertions, 12 deletions
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 77f9989..9b24a7e 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -96,6 +96,23 @@ int board_early_init_f(void)
 
 	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
 
+	/*
+	 * Reset PHY's:
+	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+	 * upon reset, and with the first reset upon powerup, the addresses are
+	 * not latched reliable, since the IRQ line is multiplexed with an
+	 * MDIO address. A 2nd reset at this time will make sure, that the
+	 * correct address is latched.
+	 */
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
 	return 0;
 }
 
@@ -231,15 +248,6 @@ int misc_init_r(void)
 	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
 
 	/*
-	 * Reset PHY's
-	 */
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
-	udelay(100);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
-	/*
 	 * Init display controller
 	 */
 	/* Setup dot clock (internal PLL, division rate 1/16) */
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index d4547e2..399da8a 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -71,7 +71,7 @@ static u32 is_ecc_enabled(void)
 
 void board_add_ram_info(int use_default)
 {
-	PPC440_SYS_INFO board_cfg;
+	PPC4xx_SYS_INFO board_cfg;
 	u32 val;
 
 	if (is_ecc_enabled())
diff --git a/board/lwmon5/sdram.h b/board/lwmon5/sdram.h
index 7f847aa..6a7bf01 100644
--- a/board/lwmon5/sdram.h
+++ b/board/lwmon5/sdram.h
@@ -395,8 +395,8 @@
 #define DDR0_26_TRAS_MAX_ENCODE(n)          ((((unsigned long)(n))&0xFFFF)<<16)
 #define DDR0_26_TRAS_MAX_DECODE(n)          ((((unsigned long)(n))>>16)&0xFFFF)
 #define DDR0_26_TREF_MASK                 0x00003FFF
-#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FF)<<0)
-#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FF)
+#define DDR0_26_TREF_ENCODE(n)              ((((unsigned long)(n))&0x3FFF)<<0)
+#define DDR0_26_TREF_DECODE(n)              ((((unsigned long)(n))>>0)&0x3FFF)
 
 #define DDR0_27                         0x1B
 #define DDR0_27_EMRS_DATA_MASK            0x3FFF0000