summaryrefslogtreecommitdiff
path: root/board/lwmon/lwmon.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/lwmon/lwmon.c')
-rw-r--r--board/lwmon/lwmon.c86
1 files changed, 57 insertions, 29 deletions
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 4a2d8e4..878752c 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -66,7 +66,7 @@ extern void disable_putc(void);
*/
const uint sdram_table[] =
{
-#if defined(CFG_MEMORY_75) || defined(CFG_MEMORY_8E)
+#if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E)
/*
* Single Read. (Offset 0 in UPM RAM)
*/
@@ -114,7 +114,7 @@ const uint sdram_table[] =
0x7FFFFC07, /* last */
0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF,
#endif
-#ifdef CFG_MEMORY_7E
+#ifdef CONFIG_SYS_MEMORY_7E
/*
* Single Read. (Offset 0 in UPM RAM)
*/
@@ -211,7 +211,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
phys_size_t initdram (int board_type)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
long int size_b0;
long int size8, size9;
@@ -222,19 +222,19 @@ phys_size_t initdram (int board_type)
*/
upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
/* burst length=4, burst type=sequential, CAS latency=2 */
- memctl->memc_mar = CFG_MAR;
+ memctl->memc_mar = CONFIG_SYS_MAR;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
- memctl->memc_or3 = CFG_OR3_PRELIM;
- memctl->memc_br3 = CFG_BR3_PRELIM;
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
/* initialize memory address register */
- memctl->memc_mamr = CFG_MAMR_8COL; /* refresh not enabled yet */
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */
/* mode initialization (offset 5) */
udelay (200); /* 0x80006105 */
@@ -268,22 +268,22 @@ phys_size_t initdram (int board_type)
*
* try 8 column mode
*/
- size8 = dram_size (CFG_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
- size9 = dram_size (CFG_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
- memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE;
udelay (500);
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
udelay (500);
}
@@ -293,7 +293,7 @@ phys_size_t initdram (int board_type)
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) |
OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
- memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
udelay (1000);
return (size_b0);
@@ -327,7 +327,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
memctl->memc_mamr = mamr_value;
@@ -359,7 +359,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
int board_early_init_f (void)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/* Disable Ethernet TENA on Port B
* Necessary because of pull up in COM3 port.
@@ -437,7 +437,7 @@ void reset_phy (void)
/* maximum number of "magic" key codes that can be assigned */
-static uchar kbd_addr = CFG_I2C_KEYBD_ADDR;
+static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
static uchar *key_match (uchar *);
@@ -481,7 +481,7 @@ static void kbd_init (void)
uchar val, errcd;
int i;
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
gd->kbd_status = 0;
@@ -759,6 +759,34 @@ static uchar *key_match (uchar *kbd_data)
}
#endif /* CONFIG_PREBOOT */
+#ifdef CONFIG_LCD_INFO
+#include <lcd.h>
+#include <version.h>
+#include <timestamp.h>
+
+void lcd_show_board_info(void)
+{
+ char temp[32];
+
+ lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
+ lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n");
+ lcd_printf (" Wolfgang DENK, wd@denx.de\n");
+#ifdef CONFIG_LCD_INFO_BELOW_LOGO
+ lcd_printf ("MPC823 CPU at %s MHz\n",
+ strmhz(temp, gd->cpu_clk));
+ lcd_printf (" %ld MB RAM, %ld MB Flash\n",
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#else
+ /* leave one blank line */
+ lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n",
+ strmhz(temp, gd->cpu_clk),
+ gd->ram_size >> 20,
+ gd->bd->bi_flashsize >> 20 );
+#endif /* CONFIG_LCD_INFO_BELOW_LOGO */
+}
+#endif /* CONFIG_LCD_INFO */
+
/*---------------Board Special Commands: PIC read/write ---------------*/
#if defined(CONFIG_CMD_BSP)
@@ -862,7 +890,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int i;
#if 0 /* Done in kbd_init */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
/* Read keys */
@@ -887,7 +915,7 @@ U_BOOT_CMD(
);
/* Read and set LSB switch */
-#define CFG_PC_TXD1_ENA 0x0008 /* PC.12 */
+#define CONFIG_SYS_PC_TXD1_ENA 0x0008 /* PC.12 */
/***********************************************************************
F* Function: int do_lsb (cmd_tbl_t *cmdtp, int flag,
@@ -920,7 +948,7 @@ V* Verification: dzu@denx.de
int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar val;
- immap_t *immr = (immap_t *) CFG_IMMR;
+ immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
switch (argc) {
case 1: /* lsb - print setting */
@@ -932,14 +960,14 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp (argv[1], "on") == 0) {
val |= 0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat |= CFG_PC_TXD1_ENA;
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else if (strcmp (argv[1], "off") == 0) {
val &= ~0x20;
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdat &= ~(CFG_PC_TXD1_ENA);
- immr->im_ioport.iop_pcdir |= CFG_PC_TXD1_ENA;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA);
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA;
} else {
break;
}
@@ -980,7 +1008,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
uchar pic_read (uchar reg)
{
- return (i2c_reg_read (CFG_I2C_PICIO_ADDR, reg));
+ return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg));
}
/***********************************************************************
@@ -1001,7 +1029,7 @@ V* Verification: dzu@denx.de
***********************************************************************/
void pic_write (uchar reg, uchar val)
{
- i2c_reg_write (CFG_I2C_PICIO_ADDR, reg, val);
+ i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val);
}
/*---------------------- Board Control Functions ----------------------*/
@@ -1022,7 +1050,7 @@ V* Verification: dzu@denx.de
void board_poweroff (void)
{
/* Turn battery off */
- ((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
+ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13));
while (1);
}
generated by cgit v1.1 at 2024-11-26 12:51:46 +0000