diff options
Diffstat (limited to 'board/liebherr/lwmon5/sdram.c')
| -rw-r--r-- | board/liebherr/lwmon5/sdram.c | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/board/liebherr/lwmon5/sdram.c b/board/liebherr/lwmon5/sdram.c new file mode 100644 index 0000000..bcb3449 --- /dev/null +++ b/board/liebherr/lwmon5/sdram.c @@ -0,0 +1,245 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2007-2013 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <asm/cache.h> +#include <asm/ppc440.h> +#include <watchdog.h> + +/* + * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory + * region. Right now the cache should still be disabled in U-Boot because of the + * EMAC driver, that need it's buffer descriptor to be located in non cached + * memory. + * + * If at some time this restriction doesn't apply anymore, just define + * CONFIG_4xx_DCACHE in the board config file and this code should setup + * everything correctly. + */ +#ifdef CONFIG_4xx_DCACHE +#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ +#else +#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ +#endif + +/*-----------------------------------------------------------------------------+ + * Prototypes + *-----------------------------------------------------------------------------*/ +extern int denali_wait_for_dlllock(void); +extern void denali_core_search_data_eye(void); +extern void dcbz_area(u32 start_address, u32 num_bytes); + +static u32 is_ecc_enabled(void) +{ + u32 val; + + mfsdram(DDR0_22, val); + val &= DDR0_22_CTRL_RAW_MASK; + if (val) + return 1; + else + return 0; +} + +void board_add_ram_info(int use_default) +{ + PPC4xx_SYS_INFO board_cfg; + u32 val; + + if (is_ecc_enabled()) + puts(" (ECC"); + else + puts(" (ECC not"); + + get_sys_info(&board_cfg); + printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000); + + mfsdram(DDR0_03, val); + val = DDR0_03_CASLAT_DECODE(val); + printf(", CL%d)", val); +} + +#ifdef CONFIG_DDR_ECC +static void wait_ddr_idle(void) +{ + /* + * Controller idle status cannot be determined for Denali + * DDR2 code. Just return here. + */ +} + +static void program_ecc(u32 start_address, + u32 num_bytes, + u32 tlb_word2_i_value) +{ + u32 val; + u32 current_addr = start_address; + u32 size; + int bytes_remaining; + + sync(); + wait_ddr_idle(); + + /* + * Because of 440EPx errata CHIP 11, we don't touch the last 256 + * bytes of SDRAM. + */ + bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE; + + /* + * We have to write the ECC bytes by zeroing and flushing in smaller + * steps, since the whole 256MByte takes too long for the external + * watchdog. + */ + while (bytes_remaining > 0) { + size = min((64 << 20), bytes_remaining); + + /* Write zero's to SDRAM */ + dcbz_area(current_addr, size); + + /* Write modified dcache lines back to memory */ + clean_dcache_range(current_addr, current_addr + size); + + current_addr += 64 << 20; + bytes_remaining -= 64 << 20; + WATCHDOG_RESET(); + } + + sync(); + wait_ddr_idle(); + + /* Clear error status */ + mfsdram(DDR0_00, val); + mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); + + /* Set 'int_mask' parameter to functionnal value */ + mfsdram(DDR0_01, val); + mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); + + sync(); + wait_ddr_idle(); +} +#endif + +/************************************************************************* + * + * initdram -- 440EPx's DDR controller is a DENALI Core + * + ************************************************************************/ +phys_size_t initdram (int board_type) +{ + /* CL=4 */ + mtsdram(DDR0_02, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */ + + mtsdram(DDR0_04, 0x0B030300); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0003C812); + mtsdram(DDR0_07, 0x00090100); + mtsdram(DDR0_08, 0x03c80001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000100); + mtsdram(DDR0_11, 0x000CC800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x1e000000); + mtsdram(DDR0_18, 0x1e1e1e1e); + mtsdram(DDR0_19, 0x1e1e1e1e); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); +#ifdef CONFIG_DDR_ECC + mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ +#else + mtsdram(DDR0_22, 0x00267F0B); +#endif + + mtsdram(DDR0_23, 0x01000000); + mtsdram(DDR0_24, 0x01010001); + + mtsdram(DDR0_26, 0x2D93028A); + mtsdram(DDR0_27, 0x0784682B); + + mtsdram(DDR0_28, 0x00000080); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000008); + + mtsdram(DDR0_43, 0x050A0200); + mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ + + denali_wait_for_dlllock(); + +#if defined(CONFIG_DDR_DATA_EYE) + /* -----------------------------------------------------------+ + * Perform data eye search if requested. + * ----------------------------------------------------------*/ + program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, + TLB_WORD2_I_ENABLE); + denali_core_search_data_eye(); + remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20); +#endif + + /* + * Program tlb entries for this size (dynamic) + */ + program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, + MY_TLB_WORD2_I_ENABLE); + +#if defined(CONFIG_DDR_ECC) +#if defined(CONFIG_4xx_DCACHE) + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0); +#else /* CONFIG_4xx_DCACHE */ + /* + * Setup 2nd TLB with same physical address but different virtual address + * with cache enabled. This is done for fast ECC generation. + */ + program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); + + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); + + /* + * Now after initialization (auto-calibration and ECC generation) + * remove the TLB entries with caches enabled and program again with + * desired cache functionality + */ + remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20); +#endif /* CONFIG_4xx_DCACHE */ +#endif /* CONFIG_DDR_ECC */ + + /* + * Clear possible errors resulting from data-eye-search. + * If not done, then we could get an interrupt later on when + * exceptions are enabled. + */ + set_mcsr(get_mcsr()); + + return (CONFIG_SYS_MBYTES_SDRAM << 20); +} |