summaryrefslogtreecommitdiff
path: root/board/korat/korat.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/korat/korat.c')
-rw-r--r--board/korat/korat.c100
1 files changed, 50 insertions, 50 deletions
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 0d90fb3..5ad75f7 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -38,7 +38,7 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
@@ -46,11 +46,11 @@ ulong flash_get_size(ulong base, int banknum);
void korat_buzzer(int const on)
{
if (on) {
- out_8((u8 *) CFG_CPLD_BASE + 0x05,
- in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80);
+ out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
+ in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) | 0x80);
} else {
- out_8((u8 *) CFG_CPLD_BASE + 0x05,
- in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80);
+ out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05,
+ in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) & ~0x80);
}
}
#endif
@@ -66,16 +66,16 @@ int board_early_init_f(void)
extern void korat_branch_absolute(uint32_t addr);
- for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) {
+ for (mscount = 0; mscount < CONFIG_SYS_KORAT_MAN_RESET_MS; ++mscount) {
udelay(1000);
- if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) {
+ if (gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) {
/* This call does not return. */
korat_branch_absolute(
- CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4);
+ CONFIG_SYS_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4);
}
}
korat_buzzer(1);
- while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_))
+ while (!gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_))
udelay(1000);
korat_buzzer(0);
@@ -115,33 +115,33 @@ int board_early_init_f(void)
* Take sim card reader and CF controller out of reset. Also enable PHY
* auto-detect until board-specific PHY resets are available.
*/
- out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0);
+ out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, 0xC0);
/* Configure the two Ethernet PHYs. For each PHY, configure for fiber
* if the SFP module is present, and for copper if it is not present.
*/
for (eth = 0; eth < 2; ++eth) {
- if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) {
+ if (gpio_read_in_bit(CONFIG_SYS_GPIO_SFP0_PRESENT_ + eth)) {
/* SFP module not present: configure PHY for copper. */
/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
- out_8((u8 *) CFG_CPLD_BASE + 0x03,
- in_8((u8 *) CFG_CPLD_BASE + 0x03) |
+ out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
+ in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) |
0x06 << (4 * eth));
} else {
/* SFP module present: configure PHY for fiber and
enable output */
- gpio_write_bit(CFG_GPIO_PHY0_FIBER_SEL + eth, 1);
- gpio_write_bit(CFG_GPIO_SFP0_TX_EN_ + eth, 0);
+ gpio_write_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL + eth, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_SFP0_TX_EN_ + eth, 0);
}
}
/* enable Ethernet: set GPIO45 and GPIO46 to 1 */
- gpio_write_bit(CFG_GPIO_PHY0_EN, 1);
- gpio_write_bit(CFG_GPIO_PHY1_EN, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_PHY0_EN, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_PHY1_EN, 1);
/* Wait 1 ms, then enable Fiber signal detect to PHYs. */
udelay(1000);
- out_8((u8 *) CFG_CPLD_BASE + 0x03,
- in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88);
+ out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03,
+ in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x88);
/* select Ethernet (and optionally IIC1) pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
@@ -176,8 +176,8 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
if (1 != banknum)
return 0;
- info->size = CFG_FLASH0_SIZE;
- info->sector_count = CFG_FLASH0_SIZE / 0x20000;
+ info->size = CONFIG_SYS_FLASH0_SIZE;
+ info->sector_count = CONFIG_SYS_FLASH0_SIZE / 0x20000;
info->flash_id = 0x01000000;
info->portwidth = 2;
info->chipwidth = 2;
@@ -192,12 +192,12 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
info->manufacturer_id = 1;
info->device_id = 0x007E;
-#if CFG_FLASH0_SIZE == 0x01000000
+#if CONFIG_SYS_FLASH0_SIZE == 0x01000000
info->device_id2 = 0x2101;
-#elif CFG_FLASH0_SIZE == 0x04000000
+#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
info->device_id2 = 0x2301;
#else
-#error Unable to set device_id2 for current CFG_FLASH0_SIZE
+#error Unable to set device_id2 for current CONFIG_SYS_FLASH0_SIZE
#endif
info->ext_addr = 0x0040;
@@ -349,13 +349,13 @@ int misc_init_r(void)
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
unsigned long sdr0_pfc1;
- uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+ uint32_t const flash1_size = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
char const *const act = getenv("usbact");
/*
* Re-do FLASH1 sizing and adjust flash start and offset.
*/
- gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size;
+ gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size;
gd->bd->bi_flashoffset = 0;
mtdcr(ebccfga, pb1cr);
@@ -375,31 +375,31 @@ int misc_init_r(void)
* environment
*/
gd->bd->bi_flashoffset =
- CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR;
+ CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR;
mtdcr(ebccfga, pb1cr);
pbcr = mfdcr(ebccfgd);
- size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21;
+ size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
mtdcr(ebccfga, pb1cr);
mtdcr(ebccfgd, pbcr);
/* Monitor protection ON by default */
#if defined(CONFIG_KORAT_PERMANENT)
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
flash_info + 1);
#else
- (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
flash_info);
#endif
/* Env protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
flash_info);
- (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
- CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+ CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
flash_info);
/*
@@ -536,7 +536,7 @@ int misc_init_r(void)
set_serial_number();
set_mac_addresses();
- gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1);
+ gpio_write_bit(CONFIG_SYS_GPIO_ATMEGA_RESET_, 1);
return 0;
}
@@ -544,20 +544,20 @@ int misc_init_r(void)
int checkboard(void)
{
char const *const s = getenv("serial#");
- u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
+ u8 const rev = in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0);
printf("Board: Korat, Rev. %X", rev);
if (s)
printf(", serial# %s", s);
printf(".\n Ethernet PHY 0: ");
- if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL))
+ if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL))
printf("fiber");
else
printf("copper");
printf(", PHY 1: ");
- if (gpio_read_out_bit(CFG_GPIO_PHY1_FIBER_SEL))
+ if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY1_FIBER_SEL))
printf("fiber");
else
printf("copper");
@@ -644,7 +644,7 @@ int pci_pre_init(struct pci_controller *hose)
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*
@@ -660,9 +660,9 @@ void pci_target_init(struct pci_controller *hose)
*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */
out32r(PCIX0_PMM0PCILA,
- CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
@@ -670,9 +670,9 @@ void pci_target_init(struct pci_controller *hose)
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
out32r(PCIX0_PMM1LA,
- CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */
+ CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */
out32r(PCIX0_PMM1PCILA,
- CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */
+ CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
@@ -688,8 +688,8 @@ void pci_target_init(struct pci_controller *hose)
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CFG_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+ CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
@@ -708,9 +708,9 @@ void pci_target_init(struct pci_controller *hose)
*/
pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
@@ -771,7 +771,7 @@ void ft_board_setup(void *blob, bd_t *bd)
val[0] = 1; /* chip select number */
val[1] = 0; /* always 0 */
val[2] = gd->bd->bi_flashstart;
- val[3] = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+ val[3] = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
if (rc)