10 files changed, 687 insertions, 0 deletions
diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile
new file mode 100644
index 0000000..35d17ce
--- /dev/null
+++ b/board/keymile/kmp204x/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= $(BOARD).o ddr.o eth.o tlb.o pci.o law.o \
+	../common/common.o ../common/ivm.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/keymile/kmp204x/ddr.c b/board/keymile/kmp204x/ddr.c
new file mode 100644
index 0000000..bd425aa
--- /dev/null
+++ b/board/keymile/kmp204x/ddr.c
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+  */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	if (ctrl_num) {
+		printf("Wrong parameter for controller number %d", ctrl_num);
+		return;
+	}
+
+	/* automatic calibration for nb of cycles between read and DQS pre */
+	popts->cpo_override = 0xFF;
+
+	/* 1/2 clk delay between wr command and data strobe */
+	popts->write_data_delay = 4;
+	/* clk lauched 1/2 applied cylcle after address command */
+	popts->clk_adjust = 4;
+	/* 1T timing: command/address held for only 1 cycle */
+	popts->twot_en = 0;
+
+	/* we have only one module, half str should be OK */
+	popts->half_strength_driver_enable = 1;
+
+	/* wrlvl values overriden as recommended by ddr init func */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x6;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm;
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = 0;
+
+	puts("Initializing with SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	debug("    DDR: ");
+	return dram_size;
+}
diff --git a/board/keymile/kmp204x/eth.c b/board/keymile/kmp204x/eth.c
new file mode 100644
index 0000000..a073105
--- /dev/null
+++ b/board/keymile/kmp204x/eth.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <phy.h>
+
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+#ifdef CONFIG_FMAN_ENET
+	struct fsl_pq_mdio_info dtsec_mdio_info;
+
+	printf("Initializing Fman\n");
+
+	dtsec_mdio_info.regs =
+		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+	/* DTESC1/2 don't have a PHY, they are temporarily disabled
+	 * so that u-boot doesn't try to unsuccessfuly enable them */
+	fm_disable_port(FM1_DTSEC1);
+	fm_disable_port(FM1_DTSEC2);
+
+	/*
+	 * Program RGMII DTSEC5 (FM1 MAC5) on the EC2 physical itf
+	 * This is the debug interface, the only one used in u-boot
+	 */
+	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+	fm_info_set_mdio(FM1_DTSEC5,
+			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+	ret = cpu_eth_init(bis);
+
+	/* reenable DTSEC1/2 for later (kernel) */
+	fm_enable_port(FM1_DTSEC1);
+	fm_enable_port(FM1_DTSEC2);
+#endif
+
+	return ret;
+}
+
+#if defined(CONFIG_PHYLIB) && defined(CONFIG_PHY_MARVELL)
+
+#define mv88E1118_PAGE_REG	22
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->addr == CONFIG_SYS_FM1_DTSEC5_PHY_ADDR) {
+		/* driver config is good */
+		if (phydev->drv->config)
+			phydev->drv->config(phydev);
+
+		/* but we still need to fix the LEDs */
+		phy_write(phydev, MDIO_DEVAD_NONE, mv88E1118_PAGE_REG, 0x0003);
+		phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x0840);
+		phy_write(phydev, MDIO_DEVAD_NONE, mv88E1118_PAGE_REG, 0x0000);
+	}
+
+	return 0;
+}
+#endif
diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
new file mode 100644
index 0000000..f02642a
--- /dev/null
+++ b/board/keymile/kmp204x/kmp204x.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2011,2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/common.h"
+#include "kmp204x.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	printf("Board: Keymile %s\n", CONFIG_KM_BOARD_NAME);
+
+	return 0;
+}
+
+/* TODO: implement the I2C deblocking function */
+int i2c_make_abort(void)
+{
+	return 1;
+}
+
+#define ZL30158_RST	8
+#define ZL30343_RST	9
+
+int board_early_init_f(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
+	setbits_be32(&gur->ddrclkdr, 0x001f000f);
+
+	/* take the Zarlinks out of reset as soon as possible */
+	qrio_prst(ZL30158_RST, false, false);
+	qrio_prst(ZL30343_RST, false, false);
+
+	/* and set their reset to power-up only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST);
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	set_liodns();
+	setup_portals();
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(unsigned long dummy)
+{
+	return 66666666;
+}
+
+#define WDMASK_OFF	0x16
+
+static void qrio_wdmask(u8 bit, bool wden)
+{
+	u16 wdmask;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	wdmask = in_be16(qrio_base + WDMASK_OFF);
+
+	if (wden)
+		wdmask |= (1 << bit);
+	else
+		wdmask &= ~(1 << bit);
+
+	out_be16(qrio_base + WDMASK_OFF, wdmask);
+}
+
+#define PRST_OFF	0x1a
+
+void qrio_prst(u8 bit, bool en, bool wden)
+{
+	u16 prst;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	qrio_wdmask(bit, wden);
+
+	prst = in_be16(qrio_base + PRST_OFF);
+
+	if (en)
+		prst &= ~(1 << bit);
+	else
+		prst |= (1 << bit);
+
+	out_be16(qrio_base + PRST_OFF, prst);
+}
+
+#define PRSTCFG_OFF	0x1c
+
+void qrio_prstcfg(u8 bit, u8 mode)
+{
+	u32 prstcfg;
+	u8 i;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
+
+	for (i = 0; i < 2; i++) {
+		if (mode & (1<<i))
+			set_bit(2*bit+i, &prstcfg);
+		else
+			clear_bit(2*bit+i, &prstcfg);
+	}
+
+	out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
+}
+
+
+#define BOOTCOUNT_OFF	0x12
+
+void bootcount_store(ulong counter)
+{
+	u8 val;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	val = (counter <= 255) ? (u8)counter : 255;
+	out_8(qrio_base + BOOTCOUNT_OFF, val);
+}
+
+ulong bootcount_load(void)
+{
+	u8 val;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+	val = in_8(qrio_base + BOOTCOUNT_OFF);
+	return val;
+}
+
+#define NUM_SRDS_BANKS	2
+#define PHY_RST		15
+
+int misc_init_r(void)
+{
+	serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 expected[NUM_SRDS_BANKS] = {SRDS_PLLCR0_RFCK_SEL_100,
+		SRDS_PLLCR0_RFCK_SEL_125};
+	unsigned int i;
+
+	/* check SERDES reference clocks */
+	for (i = 0; i < NUM_SRDS_BANKS; i++) {
+		u32 actual = in_be32(&regs->bank[i].pllcr0);
+		actual &= SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (actual != expected[i]) {
+			printf("Warning: SERDES bank %u expects reference \
+			       clock %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected[i]),
+			       serdes_clock_to_string(actual));
+		}
+	}
+
+	/* take the mgmt eth phy out of reset */
+	qrio_prst(PHY_RST, false, false);
+
+	return 0;
+}
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_read_eeprom();
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_LAST_STAGE_INIT)
+int last_stage_init(void)
+{
+	set_km_env();
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+void fdt_fixup_fman_mac_addresses(void *blob)
+{
+	int node, i, ret;
+	char *tmp, *end;
+	unsigned char mac_addr[6];
+
+	/* get the mac addr from env */
+	tmp = getenv("ethaddr");
+	if (!tmp) {
+		printf("ethaddr env variable not defined\n");
+		return;
+	}
+	for (i = 0; i < 6; i++) {
+		mac_addr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+		if (tmp)
+			tmp = (*end) ? end+1 : end;
+	}
+
+	/* find the correct fdt ethernet path and correct it */
+	node = fdt_path_offset(blob, "/soc/fman/ethernet@e8000");
+	if (node < 0) {
+		printf("no /soc/fman/ethernet path offset\n");
+		return;
+	}
+	ret = fdt_setprop(blob, node, "local-mac-address", &mac_addr, 6);
+	if (ret) {
+		printf("error setting local-mac-address property\n");
+		return;
+	}
+}
+#endif
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_fman_mac_addresses(blob);
+#endif
+}
diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h
new file mode 100644
index 0000000..b6ba672
--- /dev/null
+++ b/board/keymile/kmp204x/kmp204x.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#define PRSTCFG_POWUP_UNIT_CORE_RST	0x0
+#define PRSTCFG_POWUP_UNIT_RST		0x1
+#define PRSTCFG_POWUP_RST		0x3
+
+void qrio_prst(u8 bit, bool en, bool wden);
+void qrio_prstcfg(u8 bit, u8 mode);
+
+void pci_of_setup(void *blob, bd_t *bd);
diff --git a/board/keymile/kmp204x/law.c b/board/keymile/kmp204x/law.c
new file mode 100644
index 0000000..75d69e8
--- /dev/null
+++ b/board/keymile/kmp204x/law.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
+#endif
+	SET_LAW(CONFIG_SYS_QRIO_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_LBAPP1_BASE_PHYS
+	SET_LAW(CONFIG_SYS_LBAPP1_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#endif
+#ifdef CONFIG_SYS_LBAPP2_BASE_PHYS
+	SET_LAW(CONFIG_SYS_LBAPP2_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg
new file mode 100644
index 0000000..f38dcf9
--- /dev/null
+++ b/board/keymile/kmp204x/pbi.cfg
@@ -0,0 +1,35 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer docs/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1 as 1MB SRAM
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 27170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c
new file mode 100644
index 0000000..ec20c8a
--- /dev/null
+++ b/board/keymile/kmp204x/pci.c
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+#include "kmp204x.h"
+
+#define PCIE_SW_RST	14
+#define HOOPER_SW_RST	12
+
+void pci_init_board(void)
+{
+	qrio_prst(PCIE_SW_RST, false, false);
+	qrio_prst(HOOPER_SW_RST, false, false);
+	/* Hooper is not direcly PCIe capable */
+	mdelay(50);
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg
new file mode 100644
index 0000000..f2b7fe3
--- /dev/null
+++ b/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for kmp204x boards
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+14600000 00000000 28200000 00000000
+148E70CF CFC02000 58000000 41000000
+00000000 00000000 00000000 F4428002
+00000000 00000000 00000000 00000000
diff --git a/board/keymile/kmp204x/tlb.c b/board/keymile/kmp204x/tlb.c
new file mode 100644
index 0000000..d03ca80
--- /dev/null
+++ b/board/keymile/kmp204x/tlb.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	/* TLB 1 */
+	/* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+	/* QRIO */
+	SET_TLB_ENTRY(1, CONFIG_SYS_QRIO_BASE, CONFIG_SYS_QRIO_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_64K, 1),
+	/* *I*G* - PCI1 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_512M, 1),
+	/* *I*G* - PCI3 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_512M, 1),
+	/* *I*G* - PCI1&3 I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_128K, 1),
+#ifdef CONFIG_SYS_LBAPP1_BASE_PHYS
+	/* LBAPP1 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBAPP1_BASE, CONFIG_SYS_LBAPP1_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_256M, 1),
+#endif
+#ifdef CONFIG_SYS_LBAPP2_BASE_PHYS
+	/* LBAPP2 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBAPP2_BASE, CONFIG_SYS_LBAPP2_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_256M, 1),
+#endif
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_1M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_1M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_1M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_1M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_32K, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);