diff options
Diffstat (limited to 'board/keymile/kmeter1/kmeter1.c')
| -rw-r--r-- | board/keymile/kmeter1/kmeter1.c | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c new file mode 100644 index 0000000..f04a57a --- /dev/null +++ b/board/keymile/kmeter1/kmeter1.c @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <ioports.h> +#include <mpc83xx.h> +#include <i2c.h> +#include <miiphy.h> +#include <asm/io.h> +#include <asm/mmu.h> +#include <pci.h> +#include <libfdt.h> + +#include "../common/common.h" + +const qe_iop_conf_t qe_iop_conf_tab[] = { + /* port pin dir open_drain assign */ + + /* MDIO */ + {0, 1, 3, 0, 2}, /* MDIO */ + {0, 2, 1, 0, 1}, /* MDC */ + + /* UCC4 - UEC */ + {1, 14, 1, 0, 1}, /* TxD0 */ + {1, 15, 1, 0, 1}, /* TxD1 */ + {1, 20, 2, 0, 1}, /* RxD0 */ + {1, 21, 2, 0, 1}, /* RxD1 */ + {1, 18, 1, 0, 1}, /* TX_EN */ + {1, 26, 2, 0, 1}, /* RX_DV */ + {1, 27, 2, 0, 1}, /* RX_ER */ + {1, 24, 2, 0, 1}, /* COL */ + {1, 25, 2, 0, 1}, /* CRS */ + {2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */ + {2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */ + + /* DUART - UART2 */ + {5, 0, 1, 0, 2}, /* UART2_SOUT */ + {5, 2, 1, 0, 1}, /* UART2_RTS */ + {5, 3, 2, 0, 2}, /* UART2_SIN */ + {5, 1, 2, 0, 3}, /* UART2_CTS */ + + /* END of table */ + {0, 0, 0, 0, QE_IOP_TAB_END}, +}; + +int board_early_init_r (void) +{ + void *reg = (void *)(CONFIG_SYS_IMMR + 0x14a8); + u32 val; + + /* + * Because of errata in the UCCs, we have to write to the reserved + * registers to slow the clocks down. + */ + val = in_be32 (reg); + /* UCC1 */ + val |= 0x00003000; + /* UCC2 */ + val |= 0x0c000000; + out_be32 (reg, val); + /* enable the PHY on the PIGGY */ + setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01); + + return 0; +} + +int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + u32 ddr_size; + u32 ddr_size_log2; + + msize = CONFIG_SYS_DDR_SIZE; + for (ddr_size = msize << 20, ddr_size_log2 = 0; + (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { + if (ddr_size & 1) + return -1; + } + + im->sysconf.ddrlaw[0].ar = + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + + im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; + im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; + udelay (200); + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +phys_size_t initdram (int board_type) +{ +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + extern void ddr_enable_ecc (unsigned int dram_size); +#endif + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main SODIMM */ + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + msize = fixed_sdram (); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) + /* + * Initialize DDR ECC byte + */ + ddr_enable_ecc (msize * 1024 * 1024); +#endif + + /* return total bus SDRAM size(bytes) -- DDR */ + return (msize * 1024 * 1024); +} + +int checkboard (void) +{ + puts ("Board: Keymile kmeter1"); + if (ethernet_present ()) + puts (" with PIGGY."); + puts ("\n"); + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup (void *blob, bd_t *bd) +{ + ft_cpu_setup (blob, bd); +} +#endif |