diff options
Diffstat (limited to 'board/ivm/ivm.c')
| -rw-r--r-- | board/ivm/ivm.c | 70 |
1 files changed, 35 insertions, 35 deletions
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c index 4882f04..9bec198 100644 --- a/board/ivm/ivm.c +++ b/board/ivm/ivm.c @@ -161,28 +161,28 @@ int checkboard (void) phys_size_t initdram (int board_type) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; long int size_b0; /* enable SDRAM clock ("switch on" SDRAM) */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE; /* output */ - immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE; /* assert SDRAM CLKE */ + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_SDRAM_CLKE); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_SDRAM_CLKE); /* active output */ + immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_SDRAM_CLKE; /* output */ + immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_SDRAM_CLKE; /* assert SDRAM CLKE */ udelay (1); /* * Map controller bank 1 for ELIC SACCO */ - memctl->memc_or1 = CFG_OR1; - memctl->memc_br1 = CFG_BR1; + memctl->memc_or1 = CONFIG_SYS_OR1; + memctl->memc_br1 = CONFIG_SYS_BR1; /* * Map controller bank 2 for ELIC EPIC */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; + memctl->memc_or2 = CONFIG_SYS_OR2; + memctl->memc_br2 = CONFIG_SYS_BR2; /* * Configure UPMA for SHARC @@ -194,15 +194,15 @@ phys_size_t initdram (int board_type) /* * Map controller bank 4 for HDLC Address space */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + memctl->memc_or4 = CONFIG_SYS_OR4; + memctl->memc_br4 = CONFIG_SYS_BR4; #endif /* * Map controller bank 5 for SHARC */ - memctl->memc_or5 = CFG_OR5; - memctl->memc_br5 = CFG_BR5; + memctl->memc_or5 = CONFIG_SYS_OR5; + memctl->memc_br5 = CONFIG_SYS_BR5; memctl->memc_mamr = 0x00001000; @@ -212,17 +212,17 @@ phys_size_t initdram (int board_type) upmconfig (UPMB, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mptpr = CFG_MPTPR_1BK_8K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K; memctl->memc_mar = 0x00000088; /* * Map controller bank 3 to the SDRAM bank at preliminary address. */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; + memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; + memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */ udelay (200); memctl->memc_mcr = 0x80806105; /* precharge */ @@ -251,10 +251,10 @@ phys_size_t initdram (int board_type) * Check Bank 0 Memory Size for re-configuration */ size_b0 = - dram_size (CFG_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM, + dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE; return (size_b0); } @@ -272,7 +272,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; memctl->memc_mbmr = mamr_value; @@ -284,13 +284,13 @@ static long int dram_size (long int mamr_value, long int *base, void reset_phy (void) { - immap_t *immr = (immap_t *) CFG_IMMR; + immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* De-assert Ethernet Powerdown */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN; /* output */ - immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* active output */ + immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_ETH_POWERDOWN; /* output */ + immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */ udelay (1000); /* @@ -302,13 +302,13 @@ void reset_phy (void) * Note: The RESET pin is high active, but there is an * inverter on the SPD823TS board... */ - immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_ETH_RESET); + immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_ETH_RESET; /* assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET); + immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_ETH_RESET); udelay (10); /* de-assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_ETH_RESET; udelay (10); } @@ -332,21 +332,21 @@ void show_boot_progress (int status) void ide_set_reset (int on) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* * Configure PC for IDE Reset Pin */ if (on) { /* assert RESET */ - immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; } /* program port pin as GPIO output */ - immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET; } /* ------------------------------------------------------------------------- */ |