summaryrefslogtreecommitdiff
path: root/board/innokom
diff options
context:
space:
mode:
Diffstat (limited to 'board/innokom')
-rw-r--r--board/innokom/flash.c3
-rw-r--r--board/innokom/innokom.c27
2 files changed, 22 insertions, 8 deletions
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index b56707d..32c57d8 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -9,6 +9,9 @@
* (C) Copyright 2002
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
+ * (C) Copyright 2002
+ * Kai-Uwe Bloem, GDS, <kai-uwe.bloem@auerswald.de>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 0176d9c..5ee5117 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -39,20 +39,28 @@
* The Innokom board has GPIO70 connected to SCLK which can be toggled
* until all chips think that their current cycles are finished.
*/
-void i2c_init_board(void)
+int i2c_init_board(void)
{
- int i;
+ int i, icr;
- /* set gpio pin to output */
- GPDR(70) |= GPIO_bit(70);
- for (i = 0; i < 11; i++) {
+ /* disable I2C controller first, otherwhise it thinks we want to */
+ /* talk to the slave port... */
+ icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
+
+ /* set gpio pin low _before_ we change direction to output */
GPCR(70) = GPIO_bit(70);
+
+ /* now toggle between output=low and high-impedance */
+ for (i = 0; i < 20; i++) {
+ GPDR(70) |= GPIO_bit(70); /* output */
udelay(10);
- GPSR(70) = GPIO_bit(70);
+ GPDR(70) &= ~GPIO_bit(70); /* input */
udelay(10);
}
- /* set gpio pin to input */
- GPDR(70) &= ~GPIO_bit(70);
+
+ ICR = icr;
+
+ return 0;
}
@@ -98,6 +106,9 @@ int board_init (void)
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
+ /* baud rate */
+ gd->bd->bi_baudrate = CONFIG_BAUDRATE;
+
return 0;
}