diff options
Diffstat (limited to 'board/genietv/genietv.c')
| -rw-r--r-- | board/genietv/genietv.c | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c index fc21169..0a015ea 100644 --- a/board/genietv/genietv.c +++ b/board/genietv/genietv.c @@ -29,7 +29,7 @@ #include <common.h> #include <mpc8xx.h> -#define CFG_PA7 0x0100 +#define CONFIG_SYS_PA7 0x0100 /* ------------------------------------------------------------------------- */ @@ -104,7 +104,7 @@ int checkboard (void) #if 0 static void PrintState (void) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &im->im_memctl; printf ("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0, @@ -120,18 +120,18 @@ static void PrintState (void) phys_size_t initdram (int board_type) { - volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &im->im_memctl; long int size_b0, size_b1, size8; /* Enable SDRAM */ /* Configuring PA7 for general purpouse output pin */ - im->im_ioport.iop_papar &= ~CFG_PA7; /* 0 = general purpouse */ - im->im_ioport.iop_padir |= CFG_PA7; /* 1 = output */ + im->im_ioport.iop_papar &= ~CONFIG_SYS_PA7; /* 0 = general purpouse */ + im->im_ioport.iop_padir |= CONFIG_SYS_PA7; /* 1 = output */ /* Enable SDRAM - PA7 = 1 */ - im->im_ioport.iop_padat |= CFG_PA7; /* value of PA7 */ + im->im_ioport.iop_padat |= CONFIG_SYS_PA7; /* value of PA7 */ /* * Preliminary prescaler for refresh (depends on number of @@ -139,9 +139,9 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; - memctl->memc_mbmr = CFG_MBMR_8COL; + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; upmconfig (UPMB, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); @@ -152,11 +152,11 @@ phys_size_t initdram (int board_type) * SDRAM size has been determined. */ - memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM; + memctl->memc_or1 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br1 = ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); - memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM; + memctl->memc_or2 = 0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); @@ -168,14 +168,14 @@ phys_size_t initdram (int board_type) memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */ /* Execute refresh 8 times */ - memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X; + memctl->memc_mbmr = (CONFIG_SYS_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X; memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */ memctl->memc_mcr = 0x80804130; /* SDRAM bank 1 - execute twice */ /* Execute refresh 4 times */ - memctl->memc_mbmr = CFG_MBMR_8COL; + memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* * Check Bank 0 Memory Size for re-configuration @@ -187,7 +187,7 @@ phys_size_t initdram (int board_type) PrintState (); #endif /* printf ("\nChecking bank1..."); */ - size8 = dram_size (CFG_MBMR_8COL, (long *) SDRAM_BASE1_PRELIM, + size8 = dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); size_b0 = size8; @@ -201,17 +201,17 @@ phys_size_t initdram (int board_type) * Final mapping: map bigger bank first */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; + memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; if (size_b1 > 0) { /* * Position Bank 1 immediately above Bank 0 */ memctl->memc_or2 = - ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = - ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) + + ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) + (size_b0 & BR_BA_MSK); } else { /* @@ -221,14 +221,14 @@ phys_size_t initdram (int board_type) */ memctl->memc_br2 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ - memctl->memc_mptpr = CFG_MPTPR_1BK_4K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; } /* If no memory detected, disable SDRAM */ if ((size_b0 + size_b1) == 0) { printf ("disabling SDRAM!\n"); /* Disable SDRAM - PA7 = 1 */ - im->im_ioport.iop_padat &= ~CFG_PA7; /* value of PA7 */ + im->im_ioport.iop_padat &= ~CONFIG_SYS_PA7; /* value of PA7 */ } /* else */ /* printf("done! (%08lx)\n", size_b0 + size_b1); */ @@ -269,8 +269,8 @@ static long int dram_size (long int mbmr_value, long int *base, #if defined(CONFIG_CMD_PCMCIA) -#ifdef CFG_PCMCIA_MEM_ADDR -volatile unsigned char *pcmcia_mem = (unsigned char *) CFG_PCMCIA_MEM_ADDR; +#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR +volatile unsigned char *pcmcia_mem = (unsigned char *) CONFIG_SYS_PCMCIA_MEM_ADDR; #endif int pcmcia_init (void) @@ -281,10 +281,10 @@ int pcmcia_init (void) /* ** Enable the PCMCIA for a Flash card. */ - pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia)); + pcmp = (pcmconf8xx_t *) (&(((immap_t *) CONFIG_SYS_IMMR)->im_pcmcia)); #if 0 - pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR; + pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_MEM_ADDR; pcmp->pcmc_por0 = 0xc00ff05d; #endif |