1 files changed, 45 insertions, 59 deletions

diff --git a/board/gen860t/beeper.c b/board/gen860t/beeper.c
index 46fe66b..b4c2c89 100644
--- a/board/gen860t/beeper.c
+++ b/board/gen860t/beeper.c
@@ -34,7 +34,6 @@
  * drives the amplifier input.
  */
 
-
 /*
  * Initialize beeper-related hardware. Initialize timer 1 for use with
  * the beeper. Use 66 Mhz internal clock with prescale of 33 to get
@@ -42,66 +41,59 @@
  * FIXME: we should really compute the prescale based on the reported
  * core clock frequency.
  */
-void
-init_beeper(void)
+void init_beeper (void)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_RST1 | TGCR_STP1;
 	immap->im_cpmtimer.cpmt_tmr1 = ((33 << TMR_PS_SHIFT) & TMR_PS_MSK)
-								 | TMR_OM | TMR_FRR | TMR_ICLK_IN_GEN;
+		| TMR_OM | TMR_FRR | TMR_ICLK_IN_GEN;
 	immap->im_cpmtimer.cpmt_tcn1 = 0;
 	immap->im_cpmtimer.cpmt_ter1 = 0xffff;
 	immap->im_cpmtimer.cpmt_tgcr |= TGCR_RST1;
 }
 
-
 /*
  * Set beeper frequency.  Max allowed frequency is 2.5 KHz.  This limit
  * is mostly arbitrary, but the beeper isn't really much good beyond this
  * frequency.
  */
-void
-set_beeper_frequency(uint frequency)
+void set_beeper_frequency (uint frequency)
 {
 #define FREQ_LIMIT	2500
 
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
 	/*
 	 * Compute timer ticks given desired frequency.  The timer is set up
 	 * to count 0.5 uS per tick and it takes two ticks per cycle (Hz).
 	 */
-	if (frequency > FREQ_LIMIT) frequency = FREQ_LIMIT;
-	frequency = 1000000/frequency;
-	immap->im_cpmtimer.cpmt_trr1 = (ushort)frequency;
+	if (frequency > FREQ_LIMIT)
+		frequency = FREQ_LIMIT;
+	frequency = 1000000 / frequency;
+	immap->im_cpmtimer.cpmt_trr1 = (ushort) frequency;
 }
 
-
 /*
  * Turn the beeper on
  */
-void
-beeper_on(void)
+void beeper_on (void)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr &= ~TGCR_STP1;
 }
 
-
 /*
  * Turn the beeper off
  */
-void
-beeper_off(void)
+void beeper_off (void)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
 	immap->im_cpmtimer.cpmt_tgcr |= TGCR_STP1;
 }
 
-
 /*
  * Increase or decrease the beeper volume.  Volume can be set
  * from off to full in 64 steps.  To increase volume, the output
@@ -110,75 +102,71 @@ beeper_off(void)
  * change pin mode to tristate) then output a high to go back to
  * tristate.
  */
-void
-set_beeper_volume(int steps)
+void set_beeper_volume (int steps)
 {
-    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	int i;
 
 	if (steps >= 0) {
 		for (i = 0; i < (steps >= 64 ? 64 : steps); i++) {
 			immap->im_cpm.cp_pbodr &= ~(0x80000000 >> 19);
-			udelay(1);
+			udelay (1);
 			immap->im_cpm.cp_pbodr |= (0x80000000 >> 19);
-			udelay(1);
+			udelay (1);
 		}
-	}
-	else {
+	} else {
 		for (i = 0; i > (steps <= -64 ? -64 : steps); i--) {
 			immap->im_cpm.cp_pbdat &= ~(0x80000000 >> 19);
-			udelay(1);
+			udelay (1);
 			immap->im_cpm.cp_pbdat |= (0x80000000 >> 19);
-			udelay(1);
+			udelay (1);
 		}
 	}
 }
 
-
 /*
  * Check the environment to see if the beeper needs beeping.
  * Controlled by a sequence of the form:
  * freq/delta volume/on time/off time;... where:
- * freq 		= frequency in Hz (0 - 2500)
+ * freq			= frequency in Hz (0 - 2500)
  * delta volume = volume steps up or down (-64 <= vol <= 64)
  * on time		= time in mS
  * off time		= time in mS
  *
  * Return 1 on success, 0 on failure
  */
-int
-do_beeper(char *sequence)
+int do_beeper (char *sequence)
 {
 #define DELIMITER	';'
 
-int args[4];
-int i;
-int val;
-char *p = sequence;
-char *tp;
+	int args[4];
+	int i;
+	int val;
+	char *p = sequence;
+	char *tp;
 
 	/*
 	 * Parse the control sequence.  This is a really simple parser
 	 * without any real error checking.  You can probably blow it
 	 * up really easily.
 	 */
-	if (*p == '\0' || !isdigit(*p)) {
-		printf("%s:%d: null or invalid string (%s)\n",
-				__FILE__, __LINE__, p);
+	if (*p == '\0' || !isdigit (*p)) {
+		printf ("%s:%d: null or invalid string (%s)\n",
+			__FILE__, __LINE__, p);
 		return 0;
 	}
 
 	i = 0;
 	while (*p != '\0') {
 		while (*p != DELIMITER) {
-			if (i > 3) i = 0;
-			val = (int) simple_strtol(p, &tp, 0);
+			if (i > 3)
+				i = 0;
+			val = (int) simple_strtol (p, &tp, 0);
 			if (tp == p) {
-				printf("%s:%d: no digits or bad format\n",
-								__FILE__,__LINE__);
+				printf ("%s:%d: no digits or bad format\n",
+					__FILE__, __LINE__);
 				return 0;
-			}
-			else {
+			} else {
 				args[i] = val;
 			}
 
@@ -195,19 +183,17 @@ char *tp;
 		 */
 #if 0
 		for (i = 0; i < 4; i++) {
-			printf("%s:%d:arg %d = %d\n", __FILE__, __LINE__, i, args[i]);
+			printf ("%s:%d:arg %d = %d\n", __FILE__, __LINE__, i,
+				args[i]);
 		}
-		printf("\n");
+		printf ("\n");
 #endif
-
-		set_beeper_frequency(args[0]);
-		set_beeper_volume(args[1]);
-		beeper_on();
-		udelay(1000 * args[2]);
-		beeper_off();
-		udelay(1000 * args[3]);
+		set_beeper_frequency (args[0]);
+		set_beeper_volume (args[1]);
+		beeper_on ();
+		udelay (1000 * args[2]);
+		beeper_off ();
+		udelay (1000 * args[3]);
 	}
 	return 1;
 }
-
-/* vim: set ts=4 sw=4 tw=78: */