summaryrefslogtreecommitdiff
path: root/board/gdsys/405ep
diff options
context:
space:
mode:
Diffstat (limited to 'board/gdsys/405ep')
-rw-r--r--board/gdsys/405ep/405ep.c93
-rw-r--r--board/gdsys/405ep/Makefile54
-rw-r--r--board/gdsys/405ep/io.c181
-rw-r--r--board/gdsys/405ep/iocon.c236
4 files changed, 564 insertions, 0 deletions
diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
new file mode 100644
index 0000000..d3bd233
--- /dev/null
+++ b/board/gdsys/405ep/405ep.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+
+#include "../common/fpga.h"
+
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
+#define REFLECTION_TESTPATTERN 0xdede
+#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff)
+
+int board_early_init_f(void)
+{
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
+ mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register: set ready timeout to 512 ebc-clks
+ * -> ca. 15 us
+ */
+ mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */
+
+ /*
+ * setup io-latches for reset
+ */
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+
+ /*
+ * wait for fpga-done
+ * fail ungraceful if fpga is not configuring properly
+ */
+ while (!(in_le16((void *)LATCH2_BASE) & 0x0010))
+ ;
+
+ /*
+ * setup io-latches for boot (stop reset)
+ */
+ udelay(10);
+ out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+ out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+
+ /*
+ * wait for fpga out of reset
+ * fail ungraceful if fpga is not working properly
+ */
+ while (1) {
+ fpga_set_reg(CONFIG_SYS_FPGA_RFL_LOW, REFLECTION_TESTPATTERN);
+ if (fpga_get_reg(CONFIG_SYS_FPGA_RFL_HIGH) ==
+ REFLECTION_TESTPATTERN_INV)
+ break;
+ }
+
+ return 0;
+}
diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile
new file mode 100644
index 0000000..13dff52
--- /dev/null
+++ b/board/gdsys/405ep/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-$(CONFIG_IO) += io.o
+COBJS-$(CONFIG_IOCON) += iocon.o
+
+COBJS := $(BOARD).o $(COBJS-y)
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c
new file mode 100644
index 0000000..80877b6
--- /dev/null
+++ b/board/gdsys/405ep/io.c
@@ -0,0 +1,181 @@
+/*
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+
+#include <miiphy.h>
+
+#include "../common/fpga.h"
+
+#define PHYREG_CONTROL 0
+#define PHYREG_PAGE_ADDRESS 22
+#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
+#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26
+
+enum {
+ REG_VERSIONS = 0x0002,
+ REG_FPGA_FEATURES = 0x0004,
+ REG_FPGA_VERSION = 0x0006,
+ REG_QUAD_SERDES_RESET = 0x0012,
+};
+
+enum {
+ UNITTYPE_CCD_SWITCH = 1,
+};
+
+enum {
+ HWVER_100 = 0,
+ HWVER_110 = 1,
+ HWVER_121 = 2,
+ HWVER_122 = 3,
+};
+
+int configure_gbit_phy(unsigned char addr)
+{
+ unsigned short value;
+
+ /* select page 2 */
+ if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_PAGE_ADDRESS, 0x0002))
+ goto err_out;
+ /* disable SGMII autonegotiation */
+ if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a))
+ goto err_out;
+ /* select page 0 */
+ if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_PAGE_ADDRESS, 0x0000))
+ goto err_out;
+ /* switch from powerdown to normal operation */
+ if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value))
+ goto err_out;
+ if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004))
+ goto err_out;
+ /* reset phy so settings take effect */
+ if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+ PHYREG_CONTROL, 0x9140))
+ goto err_out;
+
+ return 0;
+
+err_out:
+ printf("Error writing to the PHY addr=%02x\n", addr);
+ return -1;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+ u16 versions = fpga_get_reg(REG_VERSIONS);
+ u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION);
+ u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES);
+ unsigned unit_type;
+ unsigned hardware_version;
+ unsigned feature_channels;
+ unsigned feature_expansion;
+
+ unit_type = (versions & 0xf000) >> 12;
+ hardware_version = versions & 0x000f;
+ feature_channels = fpga_features & 0x007f;
+ feature_expansion = fpga_features & (1<<15);
+
+ printf("Board: ");
+
+ printf("CATCenter Io");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ puts("\n ");
+
+ switch (unit_type) {
+ case UNITTYPE_CCD_SWITCH:
+ printf("CCD-Switch");
+ break;
+
+ default:
+ printf("UnitType %d(not supported)", unit_type);
+ break;
+ }
+
+ switch (hardware_version) {
+ case HWVER_100:
+ printf(" HW-Ver 1.00\n");
+ break;
+
+ case HWVER_110:
+ printf(" HW-Ver 1.10\n");
+ break;
+
+ case HWVER_121:
+ printf(" HW-Ver 1.21\n");
+ break;
+
+ case HWVER_122:
+ printf(" HW-Ver 1.22\n");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported)\n",
+ hardware_version);
+ break;
+ }
+
+ printf(" FPGA V %d.%02d, features:",
+ fpga_version / 100, fpga_version % 100);
+
+ printf(" %d channel(s)", feature_channels);
+
+ printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
+
+ return 0;
+}
+
+/*
+ * setup Gbit PHYs
+ */
+int last_stage_init(void)
+{
+ unsigned int k;
+
+ miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
+ bb_miiphy_read, bb_miiphy_write);
+
+ for (k = 0; k < 32; ++k)
+ configure_gbit_phy(k);
+
+ /* take fpga serdes blocks out of reset */
+ fpga_set_reg(REG_QUAD_SERDES_RESET, 0);
+
+ return 0;
+}
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c
new file mode 100644
index 0000000..ecd6cb2
--- /dev/null
+++ b/board/gdsys/405ep/iocon.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2010
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+
+#include "../common/fpga.h"
+#include "../common/osd.h"
+
+enum {
+ REG_VERSIONS = 0x0002,
+ REG_FPGA_VERSION = 0x0004,
+ REG_FPGA_FEATURES = 0x0006,
+};
+
+enum {
+ UNITTYPE_MAIN_SERVER = 0,
+ UNITTYPE_MAIN_USER = 1,
+ UNITTYPE_VIDEO_SERVER = 2,
+ UNITTYPE_VIDEO_USER = 3,
+};
+
+enum {
+ HWVER_100 = 0,
+ HWVER_104 = 1,
+ HWVER_110 = 2,
+};
+
+enum {
+ COMPRESSION_NONE = 0,
+ COMPRESSION_TYPE1_DELTA,
+};
+
+enum {
+ AUDIO_NONE = 0,
+ AUDIO_TX = 1,
+ AUDIO_RX = 2,
+ AUDIO_RXTX = 3,
+};
+
+enum {
+ SYSCLK_147456 = 0,
+};
+
+enum {
+ RAM_DDR2_32 = 0,
+};
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+ u16 versions = fpga_get_reg(REG_VERSIONS);
+ u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION);
+ u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES);
+ unsigned unit_type;
+ unsigned hardware_version;
+ unsigned feature_compression;
+ unsigned feature_osd;
+ unsigned feature_audio;
+ unsigned feature_sysclock;
+ unsigned feature_ramconfig;
+ unsigned feature_carriers;
+ unsigned feature_video_channels;
+
+ unit_type = (versions & 0xf000) >> 12;
+ hardware_version = versions & 0x000f;
+ feature_compression = (fpga_features & 0xe000) >> 13;
+ feature_osd = fpga_features & (1<<11);
+ feature_audio = (fpga_features & 0x0600) >> 9;
+ feature_sysclock = (fpga_features & 0x0180) >> 7;
+ feature_ramconfig = (fpga_features & 0x0060) >> 5;
+ feature_carriers = (fpga_features & 0x000c) >> 2;
+ feature_video_channels = fpga_features & 0x0003;
+
+ printf("Board: ");
+
+ printf("IoCon");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ puts("\n ");
+
+ switch (unit_type) {
+ case UNITTYPE_MAIN_USER:
+ printf("Mainchannel");
+ break;
+
+ case UNITTYPE_VIDEO_USER:
+ printf("Videochannel");
+ break;
+
+ default:
+ printf("UnitType %d(not supported)", unit_type);
+ break;
+ }
+
+ switch (hardware_version) {
+ case HWVER_100:
+ printf(" HW-Ver 1.00\n");
+ break;
+
+ case HWVER_104:
+ printf(" HW-Ver 1.04\n");
+ break;
+
+ case HWVER_110:
+ printf(" HW-Ver 1.10\n");
+ break;
+
+ default:
+ printf(" HW-Ver %d(not supported)\n",
+ hardware_version);
+ break;
+ }
+
+ printf(" FPGA V %d.%02d, features:",
+ fpga_version / 100, fpga_version % 100);
+
+
+ switch (feature_compression) {
+ case COMPRESSION_NONE:
+ printf(" no compression");
+ break;
+
+ case COMPRESSION_TYPE1_DELTA:
+ printf(" type1-deltacompression");
+ break;
+
+ default:
+ printf(" compression %d(not supported)", feature_compression);
+ break;
+ }
+
+ printf(", %sosd", feature_osd ? "" : "no ");
+
+ switch (feature_audio) {
+ case AUDIO_NONE:
+ printf(", no audio");
+ break;
+
+ case AUDIO_TX:
+ printf(", audio tx");
+ break;
+
+ case AUDIO_RX:
+ printf(", audio rx");
+ break;
+
+ case AUDIO_RXTX:
+ printf(", audio rx+tx");
+ break;
+
+ default:
+ printf(", audio %d(not supported)", feature_audio);
+ break;
+ }
+
+ puts(",\n ");
+
+ switch (feature_sysclock) {
+ case SYSCLK_147456:
+ printf("clock 147.456 MHz");
+ break;
+
+ default:
+ printf("clock %d(not supported)", feature_sysclock);
+ break;
+ }
+
+ switch (feature_ramconfig) {
+ case RAM_DDR2_32:
+ printf(", RAM 32 bit DDR2");
+ break;
+
+ default:
+ printf(", RAM %d(not supported)", feature_ramconfig);
+ break;
+ }
+
+ printf(", %d carrier(s)", feature_carriers);
+
+ printf(", %d video channel(s)\n", feature_video_channels);
+
+ return 0;
+}
+
+int last_stage_init(void)
+{
+ return osd_probe();
+}
+
+/*
+ * provide access to fpga gpios (for I2C bitbang)
+ */
+void fpga_gpio_set(int pin)
+{
+ out_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x18), pin);
+}
+
+void fpga_gpio_clear(int pin)
+{
+ out_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x16), pin);
+}
+
+int fpga_gpio_get(int pin)
+{
+ return in_le16((void *)(CONFIG_SYS_FPGA_BASE + 0x14)) & pin;
+}