diff options
Diffstat (limited to 'board/freescale')
| -rw-r--r-- | board/freescale/mx51evk/mx51evk.c | 18 |
1 files changed, 5 insertions, 13 deletions
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index fd7342f..94ea1f2 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -22,6 +22,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/imx-regs.h> #include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> @@ -180,7 +181,6 @@ static void setup_iomux_spi(void) static void power_init(void) { unsigned int val; - unsigned int reg; struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; /* Write needed to Power Gate 2 register */ @@ -249,13 +249,7 @@ static void power_init(void) pmic_reg_write(REG_MODE_1, val); udelay(200); - reg = readl(GPIO2_BASE_ADDR + 0x0); - reg &= ~0x4000; /* Lower reset line */ - writel(reg, GPIO2_BASE_ADDR + 0x0); - - reg = readl(GPIO2_BASE_ADDR + 0x4); - reg |= 0x4000; /* configure GPIO lines as output */ - writel(reg, GPIO2_BASE_ADDR + 0x4); + gpio_direction_output(46, 0); /* Reset the ethernet controller over GPIO */ writel(0x1, IOMUXC_BASE_ADDR + 0x0AC); @@ -267,9 +261,7 @@ static void power_init(void) udelay(500); - reg = readl(GPIO2_BASE_ADDR + 0x0); - reg |= 0x4000; - writel(reg, GPIO2_BASE_ADDR + 0x0); + gpio_set_value(46, 1); } #ifdef CONFIG_FSL_ESDHC @@ -278,9 +270,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = readl(GPIO1_BASE_ADDR) & 0x01; + *cd = gpio_get_value(0); else - *cd = readl(GPIO1_BASE_ADDR) & 0x40; + *cd = gpio_get_value(6); return 0; } |