summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx6ull_ddr3_arm2/Kconfig9
-rw-r--r--board/freescale/mx6ull_ddr3_arm2/imximage.cfg4
-rw-r--r--board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c148
3 files changed, 145 insertions, 16 deletions
diff --git a/board/freescale/mx6ull_ddr3_arm2/Kconfig b/board/freescale/mx6ull_ddr3_arm2/Kconfig
index e351ad8..2c44a39 100644
--- a/board/freescale/mx6ull_ddr3_arm2/Kconfig
+++ b/board/freescale/mx6ull_ddr3_arm2/Kconfig
@@ -9,4 +9,13 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "mx6ull_ddr3_arm2"
+config MX6ULL_DDR3_ARM2_EMMC_REWORK
+ bool "Select this for the board with eMMC rework"
+
+config MX6ULL_DDR3_ARM2_TSC_REWORK
+ bool "Select this for the board with screen touch rework"
+
+config MX6ULL_DDR3_ARM2_QSPIB_REWORK
+ bool "Select this for the board with flash on QSPI-B port rework"
+
endif
diff --git a/board/freescale/mx6ull_ddr3_arm2/imximage.cfg b/board/freescale/mx6ull_ddr3_arm2/imximage.cfg
index 2e32991..da76e0f 100644
--- a/board/freescale/mx6ull_ddr3_arm2/imximage.cfg
+++ b/board/freescale/mx6ull_ddr3_arm2/imximage.cfg
@@ -21,9 +21,9 @@ IMAGE_VERSION 2
* spi/sd/nand/onenand, qspi/nor
*/
-#ifdef CONFIG_SYS_BOOT_QSPI
+#ifdef CONFIG_QSPI_BOOT
BOOT_FROM qspi
-#elif defined(CONFIG_SYS_BOOT_EIMNOR)
+#elif defined(CONFIG_NOR_BOOT)
BOOT_FROM nor
#else
BOOT_FROM sd
diff --git a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c
index 8cfe2e3..8e9630e 100644
--- a/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c
+++ b/board/freescale/mx6ull_ddr3_arm2/mx6ull_ddr3_arm2.c
@@ -28,7 +28,7 @@
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
#include <usb.h>
-#include <usb/ehci-fsl.h>
+#include <usb/ehci-ci.h>
#if defined(CONFIG_MXC_EPDC)
#include <lcd.h>
#include <mxc_epdc_fb.h>
@@ -86,7 +86,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define EPDC_PAD_CTRL 0x010b1
-#ifdef CONFIG_SYS_I2C_MXC
+#ifdef CONFIG_SYS_I2C
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC and EEPROM */
struct i2c_pads_info i2c_pad_info1 = {
@@ -160,7 +160,7 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
};
#endif
-#if !defined(CONFIG_SYS_USE_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
+#if !defined(CONFIG_CMD_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
static iomux_v3_cfg_t const usdhc2_pads[] = {
/* usdhc2_clk, nand_re_b, qspi1b_clk */
MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -194,7 +194,7 @@ static iomux_v3_cfg_t const usdhc2_pads[] = {
};
#endif
-#ifdef CONFIG_SYS_USE_NAND
+#ifdef CONFIG_CMD_NAND
static iomux_v3_cfg_t const nand_pads[] = {
MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
@@ -232,7 +232,7 @@ static void setup_gpmi_nand(void)
}
#endif
-#ifdef CONFIG_SYS_USE_SPINOR
+#ifdef CONFIG_MXC_SPI
static iomux_v3_cfg_t const ecspi1_pads[] = {
MX6_PAD_CSI_DATA06__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_CSI_DATA04__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -245,6 +245,7 @@ static iomux_v3_cfg_t const ecspi1_pads[] = {
static void setup_spinor(void)
{
imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+ gpio_request(IMX_GPIO_NR(4, 26), "escpi cs");
gpio_direction_output(IMX_GPIO_NR(4, 26), 0);
}
@@ -315,12 +316,14 @@ static void setup_iomux_fec(int fec_id)
if (fec_id == 0) {
imx_iomux_v3_setup_multiple_pads(fec1_pads,
ARRAY_SIZE(fec1_pads));
+ gpio_request(IMX_GPIO_NR(5, 2), "fec1 reset");
gpio_direction_output(IMX_GPIO_NR(5, 2), 0);
udelay(50);
gpio_direction_output(IMX_GPIO_NR(5, 2), 1);
} else {
imx_iomux_v3_setup_multiple_pads(fec2_pads,
ARRAY_SIZE(fec2_pads));
+ gpio_request(IMX_GPIO_NR(5, 4), "fec2 reset");
gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
udelay(50);
gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
@@ -335,6 +338,7 @@ static void setup_iomux_uart(void)
#ifdef CONFIG_FSL_QSPI
+#ifndef CONFIG_DM_SPI
#define QSPI_PAD_CTRL1 \
(PAD_CTL_SRE_FAST | PAD_CTL_SPEED_MED | \
PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_120ohm)
@@ -358,13 +362,15 @@ static iomux_v3_cfg_t const quadspi_pads[] = {
MX6_PAD_NAND_DATA05__QSPI_B_DATA03 | MUX_PAD_CTRL(QSPI_PAD_CTRL1),
#endif
};
+#endif
int board_qspi_init(void)
{
+#ifndef CONFIG_DM_SPI
/* Set the iomux */
imx_iomux_v3_setup_multiple_pads(quadspi_pads,
ARRAY_SIZE(quadspi_pads));
-
+#endif
/* Set the clock */
enable_qspi_clk(0);
@@ -380,7 +386,7 @@ static struct fsl_esdhc_cfg usdhc_cfg[2] = {
#else
{USDHC1_BASE_ADDR, 0, 4},
#endif
-#if !defined(CONFIG_SYS_USE_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
+#if !defined(CONFIG_CMD_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
{USDHC2_BASE_ADDR, 0, 4},
#endif
};
@@ -392,11 +398,17 @@ static struct fsl_esdhc_cfg usdhc_cfg[2] = {
int board_mmc_get_env_dev(int devno)
{
+ if (devno == 1 && mx6_esdhc_fused(USDHC1_BASE_ADDR))
+ devno = 0;
+
return devno;
}
int mmc_map_to_kernel_blk(int devno)
{
+ if (devno == 0 && mx6_esdhc_fused(USDHC1_BASE_ADDR))
+ devno = 1;
+
return devno;
}
@@ -413,7 +425,7 @@ int board_mmc_getcd(struct mmc *mmc)
ret = !gpio_get_value(USDHC1_CD_GPIO);
#endif
break;
-#if !defined(CONFIG_SYS_USE_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
+#if !defined(CONFIG_CMD_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
case USDHC2_BASE_ADDR:
ret = 1;
break;
@@ -442,17 +454,21 @@ int board_mmc_init(bd_t *bis)
#else
imx_iomux_v3_setup_multiple_pads(
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
+ gpio_request(USDHC1_CD_GPIO, "usdhc1 cd");
gpio_direction_input(USDHC1_CD_GPIO);
#endif
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
/* 3.3V */
+ gpio_request(USDHC1_VSELECT, "usdhc1 vsel");
+ gpio_request(USDHC1_PWR_GPIO, "usdhc1 pwr");
gpio_direction_output(USDHC1_VSELECT, 0);
gpio_direction_output(USDHC1_PWR_GPIO, 1);
break;
-#if !defined(CONFIG_SYS_USE_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
+#if !defined(CONFIG_CMD_NAND) && !defined(CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK)
case 1:
imx_iomux_v3_setup_multiple_pads(
usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ gpio_request(USDHC2_PWR_GPIO, "usdhc2 pwr");
gpio_direction_output(USDHC2_PWR_GPIO, 1);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
@@ -518,11 +534,12 @@ struct lcd_panel_info_t {
void do_enable_parallel_lcd(struct display_info_t const *dev)
{
- enable_lcdif_clock(dev->bus);
+ enable_lcdif_clock(dev->bus, 1);
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
/* Power up the LCD */
+ gpio_request(IMX_GPIO_NR(3, 4), "lcd power");
gpio_direction_output(IMX_GPIO_NR(3, 4) , 1);
/* Set Brightness to high */
@@ -647,6 +664,7 @@ static void setup_epdc_power(void)
/* EPDC_PWRSTAT - GPIO3[16] for PWR_GOOD status */
imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA11__GPIO3_IO16 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
+ gpio_request(IMX_GPIO_NR(3, 16), "EPDC_PWRSTAT");
gpio_direction_input(IMX_GPIO_NR(3, 16));
/* EPDC_VCOM0 - GPIO3[24] for VCOM control */
@@ -654,18 +672,21 @@ static void setup_epdc_power(void)
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
+ gpio_request(IMX_GPIO_NR(3, 24), "EPDC_VCOM0");
gpio_direction_output(IMX_GPIO_NR(3, 24), 1);
/* EPDC_PWRWAKEUP - GPIO3[14] for EPD PMIC WAKEUP */
imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA09__GPIO3_IO14 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
+ gpio_request(IMX_GPIO_NR(3, 14), "EPDC_PWRWAKEUP");
gpio_direction_output(IMX_GPIO_NR(3, 14), 1);
/* EPDC_PWRCTRL0 - GPIO3[17] for EPD PWR CTL0 */
imx_iomux_v3_setup_pad(MX6_PAD_LCD_DATA12__GPIO3_IO17 |
MUX_PAD_CTRL(EPDC_PAD_CTRL));
/* Set as output */
+ gpio_request(IMX_GPIO_NR(3, 17), "EPDC_PWRCTRL0");
gpio_direction_output(IMX_GPIO_NR(3, 17), 1);
}
@@ -940,6 +961,105 @@ void ldo_mode_set(int ldo_bypass)
}
}
#endif
+
+#elif defined(CONFIG_DM_PMIC_PFUZE100)
+int power_init_board(void)
+{
+ struct udevice *dev;
+ int ret;
+ unsigned int reg, dev_id, rev_id;
+
+ ret = pmic_get("pfuze100", &dev);
+ if (ret == -ENODEV)
+ return ret;
+
+ ret = pfuze_mode_init(dev, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ dev_id = pmic_reg_read(dev, PFUZE100_DEVICEID);
+ rev_id = pmic_reg_read(dev, PFUZE100_REVID);
+ printf("PMIC: PFUZE200! DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
+
+ /*
+ * Our PFUZE0200 is PMPF0200X0AEP, the Pre-programmed OTP
+ * Configuration is F0.
+ * Default VOLT:
+ * VSNVS_VOLT | 3.0V
+ * SW1AB | 1.375V
+ * SW2 | 3.3V
+ * SW3A | 1.5V
+ * SW3B | 1.5V
+ * VGEN1 | 1.5V
+ * VGEN2 | 1.5V
+ * VGEN3 | 2.5V
+ * VGEN4 | 1.8V
+ * VGEN5 | 2.8V
+ * VGEN6 | 3.3V
+ *
+ * According to schematic, we need SW3A 1.35V, SW3B 3.3V,
+ * VGEN1 1.2V, VGEN2 1.5V, VGEN3 2.8V, VGEN4 1.8V,
+ * VGEN5 3.3V, VGEN6 3.0V.
+ *
+ * Here we just use the default VOLT, but not configure
+ * them, when needed, configure them to our requested voltage.
+ */
+
+ /* Set SW1AB stanby volage to 0.975V */
+ reg = pmic_reg_read(dev, PFUZE100_SW1ABSTBY);
+ reg &= ~SW1x_STBY_MASK;
+ reg |= SW1x_0_975V;
+ pmic_reg_write(dev, PFUZE100_SW1ABSTBY, reg);
+
+ /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ reg = pmic_reg_read(dev, PFUZE100_SW1ABCONF);
+ reg &= ~SW1xCONF_DVSSPEED_MASK;
+ reg |= SW1xCONF_DVSSPEED_4US;
+ pmic_reg_write(dev, PFUZE100_SW1ABCONF, reg);
+
+ /* Enable power of VGEN5 3V3 */
+ reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL);
+ reg &= ~0x1F;
+ reg |= 0x1F;
+ pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg);
+
+ return 0;
+}
+
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
+{
+ struct udevice *dev;
+ int ret;
+ int is_400M;
+ u32 vddarm;
+
+ ret = pmic_get("pfuze100", &dev);
+ if (ret == -ENODEV) {
+ printf("No PMIC found!\n");
+ return;
+ }
+
+ /* switch to ldo_bypass mode */
+ if (ldo_bypass) {
+ /* decrease VDDARM to 1.275V */
+ pmic_clrsetbits(dev, PFUZE100_SW1ABVOL, 0x3f, PFUZE100_SW1ABC_SETP(12750));
+
+ is_400M = set_anatop_bypass(1);
+ if (is_400M)
+ vddarm = PFUZE100_SW1ABC_SETP(10750);
+ else
+ vddarm = PFUZE100_SW1ABC_SETP(11750);
+
+ pmic_clrsetbits(dev, PFUZE100_SW1ABVOL, 0x3f, vddarm);
+
+ set_anatop_bypass(1);
+
+ printf("switch to ldo_bypass mode!\n");
+ }
+}
+#endif
+
#endif
int board_early_init_f(void)
@@ -954,7 +1074,7 @@ int board_init(void)
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_SYS_I2C_MXC
+#ifdef CONFIG_SYS_I2C
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
#endif
@@ -962,15 +1082,15 @@ int board_init(void)
setup_fec(CONFIG_FEC_ENET_DEV);
#endif
-#ifdef CONFIG_SYS_USE_SPINOR
+#ifdef CONFIG_MXC_SPI
setup_spinor();
#endif
-#ifdef CONFIG_SYS_USE_NAND
+#ifdef CONFIG_CMD_NAND
setup_gpmi_nand();
#endif
-#ifdef CONFIG_SYS_USE_QSPI
+#ifdef CONFIG_FSL_QSPI
board_qspi_init();
#endif
generated by cgit v1.1 at 2024-11-01 10:41:51 +0000